Eterna FLEDB10S, FLEDB30, FLEDB50, FLEDB20 Installation Instructions Manual

Issue 2013

These instructions are provided as a guideline to assist you.

PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION

AND RETAIN FOR FUTURE REFERENCE

Model:

FLEDB10S / FLEDB20 / FLEDB30 / FLEDB50

10W, 20W, 30W & 50W Standard LED Floodlights

Pack contents:

1 x tting complete with 3
core 1.0mm2 x 0.8m silicone
cable

10W

EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:

Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
“WEEE Direc tive” eective August 20 05—UK
WEEE Regulation s eective 2nd January 20 07).
Environment Agenc y Registered Producer : WEE/
GA0248Q Z.

WHEN YOUR PR ODUCT COMES TO TH E END OF
ITS LIFE OR YO U CHOOSE TO REPLACE I T, PLEA SE
RECYCLE IT W HERE FACILITIES E XIST  DO NOT
DISPOSE WITH HOUSEHOLD WASTE.

IF YOU EXPERIENCE PROBLEMS:

If you believe your p roduct is defective, p lease return
it to the place where yo u bought it. Our Technical
Team will gladly advise on any Eterna Lighting
product, bu t may not be able to give specic
instructions regarding individual installations.

FOR PRODUCT ADVICE:

• T: 01933 673 144

• F: 01933 678 083

• E: [e-mail]

Visit our website:

www.eterna-lighting.co.uk

INSTALLATION INSTRUCTIONS

A guide for qualied electricians

IP65

30W

50W

20W

SPECIFICATIONS:

FLEDB10S FLEDB20 FLEDB30 FLEDB50

Nominal useful luminous ux

700 lm 1400 lm 2100 lm 3500 lm

Rated Wattage 10W 20W 30W 50W

Rated luminous ux 700 lm 1400 lm 2100 lm 3500 lm

Nominal life time of the lamp 30,000 hrs 30,000 hrs 30,000 hrs 30,000 hrs

Colour temperature 6200K 6200K 6200K 6200K

Number of switching cycles
before premature lamp
failure

≥17,500 ≥17,500 ≥17,500 ≥17,500

Warm-up time up to 60 % of
the full light output

Instant full light Instant full light Instant full light Instant full light

Dimmable No No No No

Lamp dimensions (mm) 113x85x84 180x140x105 225x183x108 285x235x125

Nominal beam angle 120° 120° 120° 120°

Rated power 10W 20W 30W 50W

Rated lamp lifetime 30,000 30,000 30,000 30,000

Lamp power factor >0.5 >0.9 >0.9 0.985

Lumen maintenance factor at
end of nominal life

≥0.8 ≥0.8 ≥0.8 70%

Starting time <0.5 <0.5 <0.5 <0.5

Colour rendering ≥75 ≥75 ≥75 ≥75

Colour consistency

Within 6 step

Macadam ellipse

Within 6 step

Macadam ellipse

Within 6 step

Macadam ellipse

Within 6 step

Macadam ellipse

Rated peak intensity 327cd 690cd 1025cd 1569cd

Rated beam angle 120° 120° 120° 120°

READ THIS FIRST:

Check the pack and m ake sure you have all of the
parts liste d on the front of this bookle t. If not,
contact the outlet where you bought this product.

This produc t contains glass, care must be take n when
assembling, t ting or handling to prevent per sonal
injury or damag e to the product.

This light tting must be installed by a competent
person in accordance with the current building
and IEE wiring regulations.

As the buyer, install er and/or user of this product it
is your own responsi bility to ensure that this tt ing
is t for the purpo se for which you have intended
it. Eterna Lightin g cannot accept any liability fo r
loss, damage or premature failure resulting from
inappropriate use.

This product is designed and constructed according
to the principles o f the appropriate British Stan dard
and is intended fo r normal domestic ser vice. Using
this tting in any oth er environments, for exam ple
where there is pro longed periods of use or h igher
than normal ambi ent temperatures, may result in a
shortened working life.

Switch o the mains be fore commencing installati on
and remove the appro priate circuit fuse or lock o
MCB.

This unit is suitab le for outdoor use.

This produc t is suitable for installatio n on surfaces
with normal ammability e.g. wood, plasterboard
and masonry. It is not s uitable for use on highly
ammable sur faces (e.g. polystyren e, textiles).

Before makin g xing hole(s), check that there are no
obstructi ons hidden beneath the mount ing surface
such as pipes or cab les.

Make sure that the xi ngs are strong enough to
support the co nsiderable weight of the t ting and
hold it rigidly.

The lamp must be p ositioned so that there is at lea st

0.5m (500mm) bet ween the bulb and any illuminated
surface. Floo dlights should be positio ned well away
from ammable materials.

Do not attach to su rfaces which are damp, fresh ly
painted or otherwise electrically conductive
(e.g. metallic sur faces).

This produc t is designed for permanent co nnection
to xed wiring: this m ust be a suitable circuit
(protected w ith the appropriate MCB or fuse).

When making con nections ensure that the ter minals
are tightened se curely and that no strands of wi re
protrude. Chec k that the terminals are tightened
onto the bared cond uctors and not onto any
insulation.

This produc t must be connected to an ear th
termination.

This produc t is not intended to be used by childr en
and persons wi th sensory, physical and/or ment al
impairments th at would prevent them from using i t
saf ely.

IMPORTANT - if the ex ternal exible cable of t his
luminaire is damag ed it shall be exclusively repl aced
by a qualied engi neer.

You are advised at ever y stage of your installatio n to
double-check any electrical connections you have
made. After you h ave completed your installatio n
there are elec trical tests that should b e carried out,
these tests are sp ecied in the current IEE wir ing and
building regul ations. If in doubt, consult a qual ied
electrician.

Do not carr y or lift the ood light by the mains
supply cable.

LAMP REPLACEMENT:

This luminaire has a s ealed LED lamp and is
maintenance free , no lamp replacement is require d.

CLEANING:

Clean this light t ting only with a soft dr y cloth.

Do not use any chemic al or abrasive cleaners.

INSTALLATION:

1. Choose the location f or your new light tting
giving considerations to the points listed opposite.

2. Isolate mains.

3. Using the bracket, m ark xing points and drill
xing holes, according to your chosen xing
method (Fixing s not included). See diagrams
opposite for marking measurements.

4. Terminate loose ends of wi re to an appropriate IP
rated junctio n box or similar, ensuring the Live,
Earth and Neutral polarities are observed.

Live - Brown / Red
Neutral - Blue / Bl ack
Earth - Yellow / Green

5. Restore power and te st the luminaire.

6. Adjust oodli ght head towards the area to be
illuminated and lo ck o using two clamping bol ts.

Fixation holes on bracket

Fixing slots on b racket

85mm

Fixing slots on b racket

100mm

Fixing slots on b racket

140mm

874/2012

MODELNO.

FLEDB RANGE

Fixation holes o n bracket

60mm

Fixing slots on b racket

FLEDB10S

FLEDB20

FLEDB30

FLEDB50