Eterna ELEDFLD10, ELEDFLD50, ELEDFLD20, ELEDFLD30 Installation Instructions Manual

Model:

ELEDFLD10 / 20 / 30 / 50

LED Economy Floodlights

These instructions are provided as a guideline to assist you.

PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION

AND RETAIN FOR FUTURE REFERENCE

INSTALLATION INSTRUCTIONS

A guide for qualied electricians

Email: [e-mail] / [e-mail]

Visit our website: www.eterna-lighting.co.uk

Made in ChinaIssue 1016

LAMP SPECIFICATIONS: 10W 20W 30W 50W

Luminaire lumens (with

diuser)

1000 lm 1600 lm 2200 lm 3500 lm

Lumens from chip (no

diuser)

1100 lm 2000 lm 2600 lm 4100 lm

Useful lumens

900 lm 1500 lm 2100 lm 3400 lm

Rated Wattage 10W 20W 30W 50W

Rated luminous ux 900 lm 1500 lm 2100 lm 3400 lm

Nominal life time of the lamp 30,000 hrs 30,000 hrs 30,000 hrs 30,000 hrs

Colour temperature 4000K 4000K 4000K 4000K

Number of switching cycles

before premature lamp

failure

15,000 15,000 15,000 15,000

Warm-up time up to 60 % of

the full light output

Instant full light Instant full light Instant full light Instant full light

Dimmable No No No No

LED dimensions (W/H) 17x12mm 25x18mm 43x33mm 43x33mm

Nominal beam angle 100° 100° 100° 100°

Rated power 10W 20W 30W 50W

Rated lamp lifetime 30,000 hrs 30,000 hrs 30,000 hrs 30,000 hrs

Lamp power factor 0.5 0.5 0.9 0.9

Lumen maintenance factor at

end of nominal life

50% 50% 50% 50%

Starting time 0.5s 0.5s 0.5s 0.5s

Colour rendering 65 65 65 65

Colour consistency

Within a six step

Macadam ellipse

Within a six step

Macadam ellipse

Within a six step

Macadam ellipse

Within a six step

Macadam ellipse

Rated peak intensity 465cd 714cd 965cd 1508cd

Rated beam angle 100° 100° 100° 100°

Voltage / Frequency 240V~50Hz 240V~50Hz 240V~50Hz 240V~50H z

Not suitable for accent lighting

1m

10W

50W

30W

20W

Pack Contents:

1 x LED oodlight
complete with 3
core x 80cm cable

READ THIS FIRST:

Check the pack and m ake sure you have all of the
parts liste d on the front of this bookle t. If not,
contact the outlet where you bought this product.

This produc t contains glass, care must be take n when
assembling, t ting or handling to prevent per sonal
injury or damag e to the product.

This produc t must be installed by a compet ent
person in accord ance with the current building a nd
IEE wiring regulations.

As the buyer, install er and/or user of this product it
is your own responsi bility to ensure that this tt ing
is t for the purpo se for which you have intended
it. Eterna Lightin g cannot accept any liability fo r
loss, damage or premature failure resulting from
inappropriate use.

This product is designed and constructed according
to the principles o f the appropriate British Stan dard
and is intended fo r normal domestic ser vice. Using
this tting in any oth er environments may result in a
shortened working life.

Switch o the mains be fore commencing installati on
and remove the appro priate circuit fuse or lock o
MCB.

This unit is suitab le for outdoor use.

This produc t is designed for permanent co nnection
to xed wiring: this m ust be a suitable circuit
(protected w ith the appropriate MCB or fuse).

Before makin g xing hole(s), check that there are no
obstructi ons hidden beneath the mount ing surface
such as pipes or cab les.

Make sure that the xi ngs are strong enough to
support the co nsiderable weight of the t ting and
hold it rigidly a nd safely connected to th e mains
supply (lighting circuit).

The lamp must be p ositioned so that there is at lea st

0.5m (500mm) bet ween the bulb and any illuminated
surface.

When choosing th e location for your new tt ing,
ensure that the xin gs will be anchored in a solid
surface e.g. con crete, brick or a joist—do not  x
directly onto panelling, cladding, plasterboard etc.

When making con nections ensure that the ter minals
are tightened se curely and that no strands of wi re
protrude. Chec k that the terminals are tightene d
onto the bared cond uctors and not onto any
insulation.

This produc t must be connected to ear th
termination.

This produc t is not intended to be used by childr en
and persons wi th sensory, physical and/or ment al
impairments th at would prevent them from using i t
saf ely.

You are advised at ever y stage of your installatio n to
double-check any electrical connections you have
made. After you h ave completed your installatio n
there are elec trical tests that should b e carried out,
these tests are sp ecied in the current IEE wir ing and
building regulations.

INSTALLATION:

1. Choose the location f or your new light tting
giving considerations to the points listed opposite.

2. Isolate mains.

3. Using the bracket, m ark xing points and drill
xing holes, according to your chosen xing
method.

4. Terminate loose ends of wi re to an appropriate IP
rated junctio n box or similar, ensuring the below
is observed.

Live - Brown / Red
Neutral - Blue / Bl ack
Earth - Yellow / Green

5. Restore power an d test the luminaire.

6. Adjust oodli ght head towards the area to be
illuminated and lo ck o using two clamping bol ts.

LAMP REPLACEMENT:

EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:

Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
“WEEE Direc tive” eective August 20 05—UK
WEEE Regulation s eective 2nd January 20 07).
Environment Agenc y Registered Producer : WEE/
GA0248Q Z.

WHEN YOUR PR ODUCT COMES TO TH E END OF
ITS LIFE OR YO U CHOOSE TO REPLACE I T, PLEA SE
RECYCLE IT W HERE FACILITIES E XIST  DO NOT
DISPOSE WITH HOUSEHOLD WASTE.

CLEANING:

Disconnect t he power and clean the exte rior only of
this tting wit h a moist (not wet) cloth.

Do not use any chemic al or abrasive cleaners.

IF YOU EXPERIENCE PROBLEMS:

If you believe your p roduct is defective, p lease
return it to the pla ce where you bought it.
Our Technical Team will gladly ad vise on any
Eterna Lighting pr oduct, but may not be able to
give specic instructions regarding individual
installations.

874/2012

MODELNO.

ELEDFLD RANGE

The light source cont ained in this luminaire
shall only be rep laced by the manufacturer,
service age nt or a similar qualied pers on.

CAUTION, RISK OF ELECTRIC SHOCK.

The light source is designed to last the lifetime of the
luminaire.