Eterna PFH2400, AC6532 Installation Instructions Manual

Model:

PFH2400 / AC6532

2.4kW Plinth Fan Heater With 3 Colour Fascias

These instructions are provided as a guideline to assist you.

PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION

AND RETAIN FOR FUTURE REFERENCE

Pack contents:

1 x Plinth heater (brown f ascia panel)

1 x White fascia pan el

1 x Stainless steel f ascia panel

1 x Screw xing ki t (3 colours)

INSTALLATION INSTRUCTIONS

A guide for qualied electricians

EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:

Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
“WEEE Direc tive” eective August 20 05—UK
WEEE Regulation s eective 2nd January 20 07).
Environment Agenc y Registered Producer : WEE/
GA0248Q Z.

WHEN YOUR PR ODUCT COMES TO TH E END OF
ITS LIFE OR YO U CHOOSE TO REPLACE I T, PLEA SE
RECYCLE IT W HERE FACILITIES E XIST  DO NOT
DISPOSE WITH HOUSEHOLD WASTE.

CLEANING:

Disconnect t he power and clean the exte rior only of
this tting wit h a soft dry cloth.

Do not use any chemic al or abrasive cleaners.

IF YOU EXPERIENCE PROBLEMS:

If you believe your p roduct is defective, p lease return
it to the place where yo u bought it. Our Technical
Team will gladly advise on any Eterna Lighting
product, bu t may not be able to give specic
instructions regarding individual installations.

SOME PARTS OF THIS
PRODUCT CAN BECOME
VERY HOT AND CAUSE
BURNS. PARTICULAR
ATTENTION HAS TO BE
GIVEN WHERE CHILDREN
AND VULNERABLE
PEOPLE ARE PRESENT.

CAUTION!

Children of less than 3 years should be kept away from the
heater unless continuously supervised.

Children aged from 3 years and less than 8 years shall only
switch on/o the appliance provided that it has been placed
or installed in its intended normal operating position and

they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
Children aged from 3 years and less than 8 years shall not plug in, regulate
and clean the appliance or perform user maintenance.

WARNING!

Email: [e-mail] / [e-mail]

Visit our website: www.eterna-lighting.co.uk

Made in ChinaIssue 0116

READ THIS FIRST:

Check the pack and m ake sure you have all of the
parts liste d on the front of this bookle t. If not,
contact the outlet where you bought this product.

This produc t must be installed by a compet ent
person in accord ance with the current building a nd
IEE wiring regulations.

As the buyer, install er and/or user of this product it
is your own responsi bility to ensure that this tt ing
is t for the purpo se for which you have intended
it. Eterna Lightin g cannot accept any liability fo r
loss, damage or premature failure resulting from
inappropriate use.

This product is designed and constructed according
to the principles o f the appropriate British Stan dard
and is intended fo r normal domestic ser vice.

Switch o the mains be fore commencing installati on
and remove the appropriate circuit fuse.

Suitable for indoor use only.

This produc t is only suitable for use in livi ng areas
(not for areas constan tly subject to moisture).

WARNING: This product becomes hot!

This produc t is not intended to be used by childr en
and persons wi th sensory, physical and/or ment al
impairments th at would prevent them from using i t
saf ely.

This produc t is suitable for installatio n on surfaces
with normal ammability e.g. wood, plasterboard,
masonry. It is not sui table for use on highly
ammable sur faces (e.g. polystyren e, textiles).

Before makin g xing hole(s), check that there are no
obstructi ons hidden beneath the mount ing surface
such as pipes or cab les.

The chosen loc ation of your new heater should a llow
for the produc t to be securely mounted and s afely
connected to th e mains supply.

WARNING - To avoid overheating,
do not cover the heater.

Do not attach to su rfaces which are damp, fresh ly
painted or other wise electricall y conductive (e.g.
metallic sur faces).

If the location o f your new heater requires the
provision of a new el ectrical supply, the suppl y
must conform with the requirements of the Building
Regulations.

This produc t is designed for permanent co nnection
to xed wiring via a f used spur (with a 13 Amp fuse).
We recommend that the s upply incorporates a
switch for ease of o peration.

Make connecti ons to the electrical supp ly in
accordance with the f ollowing code:

Live - Brown or Red
Neutral - Blue or B lack
Earth - Gree n and Yellow

This produc t must be connected to Ear th.

If the exter nal exible cable of this hea ter is
damaged it shou ld be replaced or repaired by a
qualied person.

You are advised at ever y stage of your installatio n to
double-check any electrical connections you have
made. After you h ave completed your installatio n
there are elec trical tests that should b e carried out:
these tests are sp ecied in the Wiring Reg ulations
(BS7671) refer red to in the Building Regulati ons

INSTALLATION:

NOTE: If insta lling on vinyl ooring, che ck suitability

and/or contact ooring manufacturer.

01) Select the location of you r new heater with
consideration to the conditions listed above.

02) Remove the selecte d plinth and cut a rectangul ar
hole 112mm up from the oor level and 450mm
wide.

03) Select the requi red fascia colour, oer up to the
heater, mark the xing h oles and secure to the
plinth with the colo ur match screws.

04) Make the supply conn ections according to the
colour code above.

05) Position the plinth (the he ater should be resting
squarely on all fo ur feet to prevent vibration) and
secure plinth using suitable xings.

06) Restore the pow er supply.

07) Operate the large s witch, the fan will run and
blow cold air.

08) Operating the l eft hand small switch only w ill
produce 800 Wat ts of heat. The right hand sw itch
only will delive r 1600 Wat ts of heat.

09) With both switche s operated the maximum hea t
setting of 240 0 Watts will be attained .

10) The thermostat contro l may be rotated to set the
temperature to th e desired level. The heater an d
fan will switch o o nce the desired temperature
is reached and sw itch on when the ambient
temperature drops.

SPECIFICATION:

Voltage: 240V ~/ 50Hz

Maximum power o utput: 2400W

Switch positions: 8 00W, 1600W or 2400W

Thermostat : Graduated 0 through 6 to MAX .

Illuminated on/o switch

800W

Switch

1600 W
Switch

PLINTH / BOARD

PLINTH / BOARD

PLINTH / BOARD

FLOOR

FLOOR

112m m

450mm