ETEKCITY FG830LB User Manual
1
Questions or Concerns? support@etekcity.com
Digital bluetooth body
fat scale
Model No.: FG830LB
2
Thank You.
Thank you for purchasing the FG830LB Digital bluetooth body
fat scale by Etekcity. We are dedicated to providing our
customers with quality products for building a better living.
Should you have any questions or concerns about using your
new product, feel free to reach out to our helpful Customer
Support Team at (855) 686-3835 or by email at
support@etekcity.com.
We hope you enjoy your new
product!
3
Table of Contents
Package Contents
Specifications
Safety Information
Function Diagram
Setup
App Setup
Using
Digital bluetooth body fat scale
• Weighing without the VeSync App
• Weighing with the VeSync App
Using the App
• Weight Measurements
— Add or Switch Users
— More Data
— Data Graphs
— Device Settings
Maintenance
• Cleaning the Scale
• Calibrating the Scale
• Replacing the Batteries
Display Messages
Troubleshooting
Warranty Information
Customer Support
Package Contents
1 x
Digital bluetooth body fat scale
3 x 1.5V AAA Batteries (Pre-Installed)
1 x User Manual
Specications
Weight Capacity
400 lb / 28 st / 180 kg
Graduation 0.2 lb (0.1 kg)
Weight Units
lb / st / kg
Platform Tempered Glass
Dimensions
11.8 x 11.8 x 1.0 in
(300 x 300 x 24 mm)
Battery 3 x 1.5V AAA Batteries
Auto-Off 30 seconds
3
3
4
6
7
8
9
9
10
14
16
16
17
18
20
25
25
25
26
27
28
29
30
4
Safety Information
General Use
• Check the scale before using. Do not use the
scale if it is damaged in any way.
• Do not strike or bang on the scale, and do not
use the scale if there is a slight crack on the glass.
Due to the nature of tempered glass, the glass
will shatter if there is a slight crack. If you see a
crack, contact Customer Service (page 30).
Please read and follow all instructions and safety guidelines in this manual.
NOTE:
• This scale should not be used to diagnose or treat
any medical condition.
• Scale data should not be used as a substitute for
medical advice from a healthcare professional.
• This scale uses a harmless electrical current to
measure body fat. We do not recommend using
the scale if you use medical electronic equipment
such as a pacemaker. Consult a healthcare
professional before use.
• The glass platform is slippery when wet. Always
make sure the platform and your feet are dry
before stepping on for measurement.
• Place the scale on a hard, at surface to avoid
tipping.
• To weigh safely and accurately, stand with your
feet shoulder-width apart while on the scale. Do
not stand on the edge of the scale or jump on the
scale.
• Avoid standing on the scale for a long period of
time.
• Do not overload the scale. Maximum weight
capacity is 400 lb (180 kg).
• Keep the scale in a cool area with low humidity.
Keep the scale away from heat sources, such as
ovens or heaters. Store the scale horizontally, not
vertically.
• For household use only. This scale is not intended
for commercial use.
• Handle with care.
5
Batteries
• Do not mix new and used batteries.
• If the scale is not in use for a long period of time,
remove the batteries to extend the lifetime of the
scale.
NOTE: This smart scale complies with Part 15 of the
FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
6
Function Diagram
1. Weighing Platform
2. Display
3. Anti-Skid Padding
4. Battery Compartment
5. Unit Conversion Button
6
Top Bottom
1
2
5
4
3
7
1.5v - AAA
1.5v - AAA
1.5v - AAA
Setup
Push down and Lift
Before First Use
1. Open the battery compartment on the bottom
of the scale. Remove the included AAA batteries
from the scale.
2. Remove the plastic wrap from batteries.
3. Replace the batteries. Follow the guidelines in
the battery compartment to match the + and terminals.
8
App Setup
1. Scan the QR code, or download the VeSync app
from the App Store or Google Play Store.
NOTE: For Android users, choose “Allow” (when
prompted) to use VeSync.
2. After you’ve signed up, enter your email and
password, then tap Log In.
NOTE: You must create your own VeSync account
to use third-party services and products, such as
the Amazon Echo and Google Home. These will not
work with the Guest account. You can also allow your
family or friends to use your smart scale.
9
Using Digital bluetooth body
fat scale
NOTE:
If you are pregnant, some measurements
may not be accurate.
Weighing without the VeSync App
1. Place the scale on a hard, flat surface.
NOTE: Using the scale on a soft surfaces such as
carpets and mats will result in inaccurate
measurements.
2. Step onto the scale. The scale will automatically
turn on and start measuring your weight.
3. Keep standing on the scale until the digits on the
screen ash 3 times with your nal measurement.
NOTE: Press the unit conversion button on the
bottom of the scale to change units from kilograms
(kg) to pounds (lb) to stone (st).
10
Weighing with the VeSync App
Pairing with Scale with VeSync
1. Tap the + button to add your device. 2. Tap Scales.
2
1
Loading...