ETEKCITY EDT-1USA Quick Start Manual

4. Press a second time, and the days at

the top of the display will start to flash. Use

or to select the desired day.

Digital Timer Outlet

First Time Set Up

QUICK START GUIDE

Model No.: EDT-1USA

1. First Time Set Up 2. Setting Up the Clock 3. How to Program a Timer

Questions or Concerns?

[phone] • [e-mail]

1. Press and hold for 2 seconds until the hour digit starts to flash.

2. Once the hour digit starts flashing, press

or to select the hour.

NOTE: The default setting for the clock is 24-hour time

1

Plug in the timer outlet to a powered

electrical socket, and press the reset

button (R). The screen will turn blank,

then will show the reset display.

Setting Up the Clock

2

3. Press , and the minute digits will start to

flash. Press or to select the desired

minutes.

5. Press a third time, and the hour and

minute digits will start to flash simultaneously.

Press or until the “AM” or “PM”

symbol appears on the display; this indicates that

the clock is on 12-hour time.

6. Press when you have finished setting up the clock.

(See next page on how to set up the

Daylight Savings Clock & How to Program a Timer.)

NOTE: If the “AM” or “PM’ symbol disappears, then the clock is on 24-hour time.

5. To activate your programmed timers, press and

hold for 2 seconds until the “AUTO” symbol

appears on the display.

How To Program a Timer

3

Setting Up the Daylight Savings Clock

Other Features & Warranty

1. Press and hold for 3 seconds until the

“+1h” symbol appears on the display; this indicates

that the clock is now in daylight savings mode.

1. Press , and “1 ON --:--” will appear on the

display with the hour digit flashing. Press or

to set the desired hour.

2. Press to select the minute digits; the

minute digits will now be flashing. Press or

to select the desired minutes.

3. Press to select the days of the week; the

days at the top of the display will now be flashing.

Press or to select the desired days of

the week.

NOTE: The timer outlet must read “AUTO OFF” for the

programmed timers to activate. If the display reads

“ON,” press once and the display will now show

“OFF.” Once the display shows “OFF,” press and hold

the until the “AUTO” symbol appears.

2. To cancel the daylight savings mode, press and hold for 3 seconds until the

“+1h” symbol disappears.

Please read the full manual to learn more about the other

functions and features of your new digital timer outlet.

Customer Support

Should you encounter any issues or have any questions regarding your new product,

feel free to contact our helpful Customer Support Team. Your satisfaction is our goal!

Support Hours

Monday - Friday: 9:00 am - 5:00 pm PST

Phone: [phone]

Email: [e-mail]

3. Press when you have set the daylight savings clock.

4. Press to move onto the “1 OFF” timer.

Repeat steps 1-3 to set up your “1 OFF” timer.

Press once you have set up your timers.

NOTE: Repeat steps 1-4 to program up to 20 On & Off times.