Etekcity EB4887S User Manual

Digital Body Weight Scale
Model No.: EB4887S
Questions or Concerns? support.eu@etekcity.com
Thank You.
Thank you for purchasing the EB4887S Digital Body Weight Scale by Etekcity. We are dedicated to providing our customers with quality products for building a better living. Should you have any questions or concerns about using your new product, feel free to reach out to our helpful customer support team at (855) 686-3835 or by email at support@etekcity.com. We hope you enjoy your new product!
Package Contents
Table of Contents
1 x Digital Body Weight Scale 3 x 1.5V AAA batteries 1 x User Manual 1 x Measuring Tape
Safety Information 4 Main Functions 5 Set-Up 6 Operation 7 Maintenance 10 Specifications 12 Troubleshooting 13 Warranty 14 Customer Support 15
Safety Information
IMPORTANT: Please read and comply with all
of the instructions and warnings provided in this manual before using the product. Failure to comply with the instructions and warnings provided herein may result in inaccurate results and/or damage to the product itself.
• The glass platform is slippery when wet. Make sure the platform is dry before stepping on for measurement.
• Consult your primary care doctor or physician before making changes to your diet, exercise plans, and/or physical activities.
• This scale is not intended for commercial use.
• To weigh safely and accurately, please stand still on the center of the platform until a result is calculated.
DO NOT strike or drop the scale.
DO NOT stand on the edge of the scale or jump on it.
DO NOT stand on the scale platform for a prolonged period of time or when not in weighing operation.
• Always place the scale on a hard, dry, and flat surface before measurement.
• Handle the scale with care, as it is a precision instrument.
• Clean the scale with a damp cloth and avoid getting water or any other liquid inside the scale.
DO NOT use chemical or abrasive cleaning agents to clean the scale.
• Keep the scale in a cool environment with dry air.
• Always keep the scale in a horizontal position; do not store vertically.
• If the scale fails to turn on, check whether the batteries are installed correctly. Replace the batteries if necessary.
• If an error appears on the display or if the scale does not turn off automatically, remove the batteries for 3 seconds, then reinstall them.
Main Functions
UNIT
1. Weighing Platform
2. LCD Display
3. Unit Selection
5
4. Battery Compartment
5. Anti-skid Padding
2
4
1
5
3
Set-Up
Open the battery compartment cover located on the back of the scale. Remove the three 1.5V AAA batteries from their plastic film and apply the batteries under the correct polarity. Re-seal the battery compartment in order to activate the scale.
Push and Lift
Loading...
+ 12 hidden pages