Etec LHE5587 User Manual

LHE5587

7x8W RGBW 4in1 Wash Moving Head LED Light

User's Manual

Updated: 2015.05.15

ATTENTION: Read this manual before using. Do not attempt to open the

housing or repair this device by yourself without contact us!

Troubleshooting

1. If the power supply indicator doesn't light up and the light doesn't work, please check the power

supply, the input voltage and the fuse.

2. In Stand-Alone operation, if the power supply indicator is light up and sound active indicator isn't

light up, but the light is shut off doesn't work.

A. Because sound is too small make for light shut off in sound active, please increase the music

volume or increase audio sensitivity with sensitivity knob, please check as below.

B. Please check if unit has been set up in slave mode, then set up in master mode.

3. In Master-Slave operation, slave unit don't function, please check as below.

A. Make sure to there's only one master in the chain, and the others are set in slave mode.

B. Make sure to control the unit without DMX console controlling.

C. Make sure to take a good quality power cable and connection.

Warranty Warnings:

1. Damages caused by the disregard of this user manual are not subject to Warranty.

The dealer will not accept liability for any resulting defects or problems.

2. Please consider that unauthorized modifications on the device are forbidden due to safety reasons.

Please note that damages caused by manual modifications on the device or unauthorized operation by

unqualified persons are not subject to warranty.

3. If this device will be operated in any way different to the one described in this manual, it may

suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to

dangers like short-circuit, burns electric shock, etc.

After trying the above solution you still have a problem, please contact your dealer or our company

for service.

Page 9

LCD Digital Display

MENU: Function mode selection, such as DMX512/Masterslave, AUTO strobe, Sound Active

Strobe, Constant light on, brightness adjustment

DOWN/UP: previous or next, increase or decrease

Enter: confirm and save the selection

NO.

Display

Function Details

1

A001

DMX address（001—512）, press DOWN/UP to increase or

decrease the address value

2

R255

Red brightness adjustment, press DOWN/UP to increase or

decrease the brightness（r001-r255）

3

G255

Green brightness adjustment, press DOWN/UP to increase

or decrease the brightness（G001-G255）

4

B255

Blue brightness adjustment, press DOWN/UP to increase

or decrease the brightness（b001-b255）

5

H255

White brightness adjustment, press DOWN/UP to increase

or decrease the brightness（H001-H255

）

6

PR01

Under this mode, press DOWN/UP to select built-in

program（Pr01-Pr35

）

7

SP01

Under this mode, press DOWN/UP to change the running

speed of the built-in program（SP01-SP16）

8

LD01

Color change mode, LD01 is fast change, LD02 is slow

change

9

AUTO

Testing mode, press UP/DOWN into Testing mode. AUTO

is AUTO mode, AUDI is Sound Active mode.

10

REST

Reset mode, press D into reset function

General Instructions

Unpacking:

Thank you for purchasing this product. Please read user guide for safety and operations

information before using the product. Keep this manual for future reference. This product can

create perfect light programs and effects since it has passed a series of strictly tests before

delivery. Please check the attachments listed on the page after opening the carton.

Immediately upon receiving a fixture, carefully unpack the box. Check the box contents to

ensure that all parts are present and that they are in good condition. If any part appears

damaged from shipping, or if the box shows signs of mishandling, notify the shipper

immediately. In addition, retain the box and all the packing material for inspection. In any

event, save the carton and all packing material because, in case that you have to return the

fixture to the factory, you will have to do so in its original box, with its original packing.

What is included: 1* Light, 1*Power Cable, 1*User Guide

Safety Notice:

Please read the following notes carefully because they include important safety information

about the installation, usage and maintenance of this product. It is important to read all these

notes before starting to work with this product.

There are no user serviceable parts inside the light. Any reference to

servicing this unit you may find from now on in this User Manual will only

apply to properly C we certified technicians. Do not open the housing or

attempt any repairs unless you are one of them.

Please refer to all applicable local codes and regulations for proper

installation of the light.

Keep this manual for future consultation. If you sell the light to

another user, make sure that they also receive this manual.

Avoid direct eye exposure t o the light source while the fixture is on. Always

disconnect the light from its power source before servicing. Always connect the

light to a grounded circuit to avoid the risk of electrocution.