Etec E2760C Assembly Instructions Manual

E2760C

Assembly Instructions

READ ALL WARNINGS AND
ASSEMBLY INSTRUCTIONS
BEFORE STARTING ASSEMBLY

MAXIMUM WEIGHT CAPACITY: 120 LBS
SUPPORTS MOST TV SIZES UP TO 65”

List of Parts

No.

1

2

3

4

5

Description

Top Glass - 8mm

Middle Glass - 5mm

Bottom Glass - 5mm

520mm Bolt

205mm Tube

View

Qty

1

1

1

4

4

6

7

8

9

10

11

205mm Tube

100mm Tube

100mm Tube

Metal Spacer

Bolt

20mm x 20mm
Support Bar

4

2

2

4

4

1

12

13

14

Steel Panel

Hex Wrench

20mm x 40mm
Support Bar

2

1

2

2

READ THIS FIRST!

Read all of the warnings and cautions contained in
this assembly manual .

• Do not attempt to assemble this product if you
do not understand the instructions.

• Contact a professional if you have any doubts
about safe and secure TV furniture assembly.

• Check all the parts carefully to make sure there
are no missing or damaged parts.

• Improper assembly may result in damage to
your TV, property, and personal injury.

• This product is intended only to support a
television of the indicated size and weight
combination. Using this product to support
televisions heavier than the maximum weight
capacity can damage product and cause
personal injury.

• Schoenfeld International Inc. and ETEC are
not responsible for any personal injury or
product damage due to mishandling, incorrect
mounting, incorrect assembly or incorrect use
of this product.

CHILD SAFETY WARNINGS

WARNINGS

• This product is intended only to mount a
television of the indicated size and weight
combination. Using this product to support
televisions or other products heavier than the
maximum weight capacity can damage
equipment and cause personal injury.

• Schoenfeld International Inc. and ETEC
are not responsible for any personal injury
or product damage due to mishandling,
incorrect mounting, incorrect assembly or
incorrect use of this product.

• Do not force the bolts into the hole or use an
electric drill to fasten any bolts. This could
damage the equipment or cause personal
injury.

• A large television requires two people to lift.
Schoenfeld International and ETEC are
not responsible for equipment damage or
personal injury due to mishandling.

• Do not release the TV until you are sure that
it is securely mounted. Releasing the TV
without first ensuring that it is securely
installed can result in equipment damage or
personal injury.

How and where you use your television stand is

extremely important for Child Safety.

As you set up and use your new product, keep all

of these safety tips in mind.

* Don't let children climb on or play with entertain-

ment system furniture and TVs.

* Remember that children can become excited

while watching a program, especially on a "larger
than life" TV. Make sure to place or install the TV
stand where it cannot be pushed, pulled over, or
knocked down.

* Make sure that you route all cords and cables so

that they cannot be pulled or grabbed by curious
children.

CAUTION:

• Do not place the TV face down on a hard
surface when installing the mounting plate on
the TV. Placing the TV face down on a hard
surface can result in equipment damage. Use
a blanket or other suitable surface.

• Check with your TV manual or manufacturer
to confirm the required bolt diameter accord­ing to the size, depth, and position of the
mounting holes in your TV.

FOR YOUR SAFETY, PLEASE

FOLLOW THESE PRECAUTIONS

• Always remove the TV and other equipment
from the furniture prior to moving the
assembled unit

• Be careful when moving the assembled
furniture after the glass shelf has been
installed, or when there is equipment of any
kind located on the furniture as this may
cause the shelves and other parts to become
unstable and fall.

• When in use, this furniture must be placed on
a flat, level and solid surface.

:

3

• Do not lean on or place any force on the TV
when it is on the TV stand.

• Do not climb or step on the stand.

• Do not bang into or place your own weight on

the glass sheves

• Do not place any items on the shelves or
mounts which may exceed the maximum
weight limits.

• Always place the heaviest component
(except for your TV) on the bottom shelf

Schoenfeld International Inc. and ETEC will
not be responsible for failure to assemble as
directed or for the improper assembly, use
or handling of this stand.

VEILLER Á RESPECTER CES MESURES

DE PRECAUTION!

! TOUJOURS ENLEVER LE TÉLÉVISEUR ET

AUTRE ÉQUIPEMENT AVANT DE DÉPLACER
LE MEUBLE ASSEMBLÉ.

! DÉPLACER LE MEUBLE AVEC PRÉCAUTION

UNE FOIS QUE LE PLATEAU EN VERRE A
ÉTÉ POSÉ OU LORSQU’IL Y A DU MATERIEL
PLACÉ SUR LE MEUBLE CAR CELA PEUT
CAUSER LE DÉCROCHEMENT ET LA
CHUTE DES PLATEAUX ET AUTRES ÉLÉ­MENTS.

! DURANT L’UTILISATION, LE MEUBLE DOIT

ÉTRE POSÉ SUR UNE SURFACE PLATE,
SOLIDE ET HORIZONTALE.

! NE PAS S'APPUYER CONTRE LE TÉLÉVI-

SEUR LORSQU'IL EST POSÉ SUR LE
MEUBLE.

! NE PAS GRIMPER NI MARCHER SUR LE

MEUBLE.

! NE PAS TAPER NI S'APPUYER SUR LE

PLATEAU EN VERRE.

Schoenfeld International Inc. y ETEC decline
toute responsabilité en cas d’assemblage non
conforme aux instructions ou pour l’assemblage,
l'utilisation ou la manutention incorrects de ce
meuble.

POR SU SEGURIDAD TENGA LAS
SIGUIENTES PRECAUCIONES:

! SIEMPRE QUITE EL TELEVISOR Y CUAL-

QUIER OTRO EQUIPO DEL MUEBLE
ANTES DE MOVER LA UNIDAD ARMADA.

! TENGA CUIDADO AL MOVER LA UNIDAD

ARMADA UNA VEZ INSTALADO EL
ESTANTE DE VIDRIO Y/O CUANDO HAYA
ALGUN EQUIPO EN EL MUEBLE YA QUE
ESTO PODRÍA AFLOJAR EL ESTANTE Y
OTROS ARTÍCULOS Y HACER QUE SE
CAIGAN.

! EL MUEBLE DEBE ESTAR UBICADO EN

UNA SUPERFICIE PLANA, SÓLIDA Y NIVE­LADA CUANDO SE LO ESTE UTILIZANDO.

! NO INCLINE EL TELEVISOR CUANDO ESTE

EN EL SOPORTE PARA TV.

! NO SE SUBA NI SE PARE SOBRE EL

SÓPORTE.

! NO GOLPEE EL ESTANTE DE VIDRIO NI SE

APOYE CON SU PESO SOBRE EL MISMO.

Schoenfeld International Inc. y ETEC no se
hararesponsable en caso de que no se instale
la base segun las instrucciones, ni de la
instalación, uso o manejo incorrectos de esta
base.

4

This unit is assembled

Step1

IMPORTANT: When correctly assembled,
there should be no more than 1-2mm of
space between the top of the Support Bars
(14) and the underside of the Top G;ass
Shelf (1)

4

up-side down

4

6

14

1

No.

1

6

Description

Top Glass - 8mm

14

14

View

6

Qty

1

4

6

14

5

520mm Bolt

205mm Tube

20mm x 40mm Support Bar

4

4

2

This unit is assembled

Step 2

up-side down

2

No.

2

Description

Middle Glass - 5mm

Qty

1

6

This unit is assembled

Step 3

5

up-side down

5

No.

5

5

Description

205mm Tube

Qty

4

7

This unit is assembled

Step 4

up-side down

3

No.

3

Description

Bottom Glass - 5mm

Qty

1

8

This unit is assembled

Step 5

10

9

8

up-side down

10

9

8

7

11

No.

7

8

9

10

11

Description

100mm Tube

100mm Tube

Metal Spacer

Bolt

20m x 20m Support Bar

8

11

Qty

2

2

4

4

1

13

9

Hex Wrench

1

Turn the unit over to

Step 6

stand on its legs

12

12

No.

12

Description

Steel Panel

Qty

2

10

LIMITED ONE-YEAR FURNITURE WARRANTY

We warrant this product to be free from defects in material and workmanship under normal use
for a one-year period from the original date of purchase by the original purchaser from an autho­rized ETEC dealer. We will repair or replace the unit free of charge should it become defective
under this warranty.

Should you be missing any of the assembly hardware (screws etc.), please contact the retailer or
the Technical Support Center to secure a replacement for those parts. It should not be necessary
to bring the entire unit to the store but instead bring the parts list found in the Instruction Manual
to accurately identify the missing parts and obtain replacements.

The Technical Support Center is available 24-hours a day, 7-days a week for technical assistance
or troubleshooting. To contact us by phone, please call 1-800-936-1168.

ETEC will warrant for a period of one-year from the original date of purchase, all Furniture parts
and components described in the parts list for this model located in the Instruction Manual. The
warranty covers defective materials and workmanship and is applicable only under normal use.
Our furniture models are not intended for outdoor use.

This warranty does not cover any product, which has been subject to damage due to improper
assembly or disassembly, an act of nature, misuse, neglect, accident, abuse, commercial use, or
modification of, or to, any part of the product. Also not covered are labor or assembly costs,
products purchased from unauthorized ETEC sellers or costs incurred in shipping the unit or part
for warranty repair. Under no circumstances shall ETEC, be liable for any loss (direct, indirect,
incidental, foreseen, unforeseen, special or consequential) or for any damage arising out of, or in
connection with, the use of this product.

This warranty does not cover product sold ‘As Is’.

This warranty is valid only to the original purchaser of the Product in the United States and
Canada and grants specific legal rights.

11

Schoenfeld International Inc. and ETEC
5001 American Blvd. West
Suite #275
Bloomington, Minnesota 55347

©Schoenfeld International Inc. 2013
E2760C Rev 1.2 March 2013

12