Etec DVD3300 Instruction Manual

DVD3300

DVD PLAYER

INSTRUCTION MANUAL

1-11

DV D 33 00

1080p UPCONVERTING HDMI

WARNINGS

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

• To reduce the risk of electric shock, do not open the cabinet. No user serviceable parts are inside. Refer servicing to

qualified personnel.

• This appliance uses a Laser System. To prevent direct exposure to the laser beam do not open the cabinet. Visible and
invisible laser radiation is present when the cabinet is open. Avoid direct exposure and do not stare into the beam.

• Batteries should not be exposed to excessive heat such as dire

ct sunlight, fire, or other heat sources.

• Caution: Do not expose this appliance to dripping or splashing liquids. Do not put objects filled with liquid, such as vases on
or near the appliance.

• Caution: To turn this appliance off completely, the POWER cord must be unplugged from the wall outlet. The power cord must
be easily accessible at all times.

THE LIG HTNING FLASH WITH

ARROWHEAD SYMBOL, WITHIN AN

EQUILATER AL TRIANGLE, IS IN TENDED

TO ALERT THE USER TO THE

PRESENCE OF NON-INSULATED

"DANGE ROUS VOLTA

GE" WIT HIN THE

PRODUCT'S ENCLOSURE THAT MAY BE

OF SUFFI CIENT MAG NITUDE TO

CONST ITUTE A RISK OF ELEC TRIC

SHOCK TO PERSO NS.

WARNING: TO REDUCE THE R ISK OF

ELECTR IC SHOCK, DO NOT REMOVE THE

FRONT O R REAR COVER. NO USER

SERVICEABLE PARTS ARE INSIDE . REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL .

THE EXCL AMATION POINT W ITHIN AN

EQUILATER AL TRIANGLE IS IN TENDED TO

ALERT TH E USER TO THE PRESENCE OF

IMPORTANT OPERATING AND

MAINTE NANCE (SERVI

CING)

INSTRUCTIO NS IN THE LITE RATURE

ACCOMPANYI NG THE APPLIANCE.

FCC WARNINGS

WARNING: Changes or modifications to this unit not expressly approved in this manual could void the user’s authority to operate

the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9) Do not defeat the safety purpose of the polarized or grounding -type plug. A polarized plug has

two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade and/or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete

outlet.

10) Protect the POWER cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,

such as POWER-supply cord or plug is damaged, liquid has been spilled or objects have fa

llen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

CAUTION

DO NOT OPEN

QUICK GUIDE FOR HDMI FUNCTION

1. Please check to see i f yo ur T V se t ha s a HD MI video input.

2. If your TV set has a HDMI video i np ut t he n connect the DVD player to the TV set using an HDMI cable
(not included) . Sw it ch o n th e DVD player and TV set. The DVD Player output will automatically be
adjusted from the de fa ul t vi de o output of 480i to a higher-resolution setting to match that of your TV
screen, 720p, 1080 i, o r 10 80 p. The TV screen will now show the "ETEC" logo. Press the H D M I button
on the remote contro l of t he D VD p layer and you can change the high-resolution setting of the DVD
player to, 720p, 108 0i , or 1 08 0p. Once t

he high-resolu ti on s et ti ng of the DVD player changed, the

high-resolut io n se tt in g on the TV screen image is automatically changed.

IMPORTANT NOTICE

Front and Back Panels. ..................................................................................1

Front Panel. ..................................................................................................1

Back Panel.. ................................................................................................1

Remote Control... ....................................................................................... 2

Operating the Remote Control.... .................................................................... 3

Functions.......... ........................................................................................ 4-7

System Setup..................... ................................................................... . 8-10

MP3 Function .......... ................................................................................... 10

JPEG Files..... ................... ......................................................................... 10

Troubleshooting .........................................................................................11

DVD3300

CONFORMS T O
UL STD 60065

CERTIFIED T O

CSA STD C22.2

No. 60065

DVD 33 00

1.LED DISPLAY

2.REMOTE CONTROL SENSOR

3.OPEN / CLOSE

4.PLAY / PAUSE

5.STOP

6.POWER

1. AUDIO output
use to connect both the
right and left channels

2.VIDEO output

3.COAXIAL output

4.HDMI connector

AC 90-240V~50/60Hz

15W

AC 90-240V~50/60Hz

15W

DVD3300

16:9 / 4:3

16:9/4:3