Etec A707DXI Operating Instructions Manual

CAUTION: GROUNDING OR POLARIZATION. THE PRECAUTIONS SHOULD BE

TAKEN SO THAT THE WIDER BLADE OF THE AC PLUG MUST MATCH THE SLOT
IN RECEPTACLE "WALL SOCKET".

WARNING: To reduce
the risk of electric shock, do
not remove cover (or back).
No user-serviceable
parts inside. Refer
servicing to qualified
service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation
point within the
triangle is a warning
sign alerting you of
important instructions
accompanying the
product.

The lightning flash
and arrowhead
within the triangle
is a warning
sign alerting you of
"dangerous voltage"
inside the product.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS.

E-2

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED.

AVOID EXPOSURE TO BEAM.

VORSICHT: UNSICHTBARE LASERSTRAHLUNG TRITT AUS, WENN DECKEL

GEÖFFNET UND WENN SICHERHITSVERRIEGELUNG ÜBERBRÜCKT IST.
NICHT DEM STRAHL AUSSETZEN.

VARNING: OSYNLIG LASERSTRÁLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRR

ÄR URKOPPLAND. STRÁLEN ÄR FARLIG.

ADVARSEL: USYNLIG LASERSTRÁLING VED ÁBNING. NÁR

SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÁ UDS/ETTELSE FOR
STRÁLING.

ATTENZIONE: RADIONS LASER INVISIDILE. NON GUARDARE DIRETTAMENTE

NELLA SORGENTE DEL LASER.

ACHTUNG: LASERLINSE NICHT BERÜHREN UNSICHTBARER LASERSTRAHL.
AVISO: A LENTE NUNCA DEVE SER TOCADA.

CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LASER DE CLASSE
LASER DI PRIMA CLASSE
KLASSE 1 LASER
LASER PRIMERA CLASE
LASER CLASSE 1
KLASSE 1 LASER PRODUKT

CAUTION

DO NOT EXPOSE TO DRIPPING OR SPLASHING LIQUIDS!

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU' AU FOND.

OPERATING INSTRUCTIONS

MODEL : A707DXI

S-BASS

SUPER BASS

BOOSTER

REMOTE

CONTROL

CLOCK

QUARTZ
DIGITAL

HIGH OUTPUT MICRO SHELF SYSTEM

DIGITAL CD-RADIO-CLOCK HI-FI

WITH WALL MOUNTING CAPABILITY

DATE : 5 FEB, 2007
MODEL A707DXI “eTEC”
REVISED ENGLISH I/M FOR APPROVAL
SIZE : 102 (W) X 136 (H) MM FOR EACH PAGE
PRINTING COLOR : BLACK

BLUE

BACKLIGHT

DISPLAY

DX

DIGITAL

DISPLAY

E-3 E-4

1. READ INSTRUCTIONS - All the safety and operating instruction should be read before the product
is operated.

2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future
reference.

3. HEED WARNINGS - All warning on the product and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.

5. CLEANING - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

6. ATTACHMENTS - Do not use attachments not recommended by the product manufacturer as they
may cause hazards.

7. WATER AND MOISTURE - Do not use this product near water- for example, near a bath tub,
wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. ACCESSORIES - Do not place this product on an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a child or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with
the product. Any mounting of the product should follow the manufacturer's instructions, and should
use a mounting accessory recommended by the manufacturer.

9. A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may causethe appliance and cart
combination to overturn.

10. VENTILATION - Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should
not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instruction have been adhered to.

11. POWER SOURCES - This product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply to your home, consult your
product dealer or local power company. For products intended to operate from battery power, or
other sources, refer to the operating instruction.

12. GROUNDING OR POLARIZATION - This product may be equipped with a polarized
alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarizes plug.
ALTERNATE WARNINGS - This product is equipped with a three-wire grounding-type plug, a plug
having a third (grounding) pin. This plug will only fit into a grounding-type power outlet.
This is a safety feature. If you are unable to insert the plug into the outlet, contact you electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

13. POWER-CORD PROTECTION - Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and point where they exit from the product.

SEE FIGURE:

NEC - NATIONAL ELECTRICAL CODE

GROUND
CLAMP

ANTENNA
LEAD IN WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

ELECTRIC
SERVICE
EQUIPMENT

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

IMPORTANT SAFETY INSTRUCTIONS

14. PROTECTIVE ATTACHMENT PLUG - The product is equipped with an attachment plug having

overload protection. This is a safety feature. See Instruction Manual for replacement or resetting
of protective device. If replacement of the plug is required, be sure the service technician has used
a replacement plug specified by the manufacturer that has the same overload protection as the
original plug.

15. OUTDOOR ANTENNA GROUNDING - If an outside antenna is connected to the receiver, be sure
the antenna system is grounded so as to provide some protection against voltage surges and
built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and supporting structure, grounding of the
mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of
grounding conductors, location of antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.

16. LIGHTNING - For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product due to lightning and power-line
surges.

17. POWER LINES - An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.

18. OVERLOADING - Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.

19. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this product through openings
as they may touch dangerous voltage points or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the product.

20. SERVICING - Do not attempt to service this product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards, Refer all servicing to qualified service personnel.

21. DAMAGE REQUIRING SERVICE - Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally be following the operating instructions. Adjust only
those controls that are covered by the operating instructions as an improper adjustment of
other controls may result in damage and will often require extensive work by a qualified
technician to damage and will often require extensive work by a qualified technician to restore
the product to its normal operation.
e) If the product has been dropped or damaged in any way, and
f ) When the product exhibits a distinct change in performance ­ this indicates a need for service.

22. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician
has used replacement parts specified by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric shock, or other hazards,

23. SAFETY CHECK - Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper operating condition.

24. WALL OR CEILING MOUNTING - The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.

25. HEAT - The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.

INSERTION & REMOVAL OF DISCS

- THE SET MUST BE SWITCHED "ON" WHEN OPENING OR CLOSING THE CD-DOOR.
PRESS THE DOOR "OPEN/CLOSE" BUTTON ONCE TO OPEN (OR CLOSE) THE DOOR.

- PLACE A CD INTO THE COMPARTMENT WITH THE LABEL-SIDE (PRINTED SIDE OF DISC)
FACING OUTWARDS (TOWARDS YOU).

- WHEN THE CD HAS LOCKED ONTO THE CENTER SPINDLE,
PRESS THE DOOR "OPEN/CLOSE" BUTTON TO CLOSE THE CD DOOR.

- THE CD IS NOW READY TO BE PLAYED.

- TO REMOVE A DISC, FOLLOW THE SAME PROCEDURE AS DESCRIBED ABOVE, EXCEPT
TO REMOVE THE CD INSTEAD OF INSERTING IT INTO THE COMPARTMENT.

- IMPORTANT : ALWAYS HOLD A CD BY IT'S EDGES. AVOID GETTING ANY FINGER-PRINTS,
SMUDGES OR DIRT ONTO THE SURFACE OF A DISC. IN CASE THIS HAPPENS, USE A
SPECIAL CD-CLEANING CLOTH OR CLEANING KIT TO REMOVE THE DIRT OR SMUDGES.

E-6

POWER SUPPLY

- THIS SET WORKS ON NORMAL HOUSEHOLD AC-POWER.

- MAKE SURE THE SET VOLTAGE OF THE UNIT MATCHES YOUR LOCAL VOLTAGE.

- INSERT THE PLUG OF THE AC-CORD INTO A WALL OUTLET WITH AC-POWER.

- PRESS THE “POWER” ON/ OFF KNOB TO SWITCH “ON” THE UNIT.

WHEN THE POWER IS “ON” THE ENTIRE DIGITAL DISPLAY WILL BE LIT UP WITH
A “BLUE” BACK-LIGHT. THIS INDICATES THE HI-FI IS SWITCHED “ON”.

IMPORTANT : HOW TO TELL IF POWER IS "ON" ?

- SET THE FUNCTION SWITCH TO "RADIO".

- SET THE RADIO BAND SELECTOR SWITCH TO THE DESIRED BAND.

- ROTATE TUNING KNOB TO TUNE-IN THE DESIRED STATION, AS DISPLAYED IN THE LCD
DIGITAL DISPLAY.

- ADJUST THE VOLUME TO THE DESIRED LEVEL. (UP/ DOWN)

- TO IMPROVE FM-RADIO RECEPTION, FULLY EXTEND THE FM-ANTENNA WIRE AND
ADJUST IT'S POSITION.

- TO IMPROVE AM (MW) RADIO RECEPTION, ROTATE OR RE-POSITION THE MAIN UNIT.

OPERATION OF RADIO

THE BUILT IN "SUPER BASS BOOSTER" CIRCUIT PROVIDES A POWERFUL
ENHANCEMENT TO LOW FREQUENCY MUSIC, GIVING A STRONGER BASS
SOUND WHICH IS IDEAL FOR "ROCK" OR "JAZZ" MUSIC.

- THIS SET HAS A BUILT-IN DIGITAL CLOCK, WHICH IS DISPLAYED WHEN THE UNIT IS IN
"CD" MODE OR WHEN THE UNIT IS SWITCHED "OFF" (WITH AC-POWER SUPPLY
CONNECTED).

- TO SET THE CORRECT TIME, PRESS AND HOLD THE "TIME SET SWITCH" AND PRESS
THE "MINUTE" AND "HOUR" ADJUST SWITCHES TO ADVANCE TO THE CORRECT TIME.

SUPER BASS FUNCTION

CLOCK FUNCTION - HOW TO SET CORRECT TIME

LOCATION OF CONTROLS

1. CD/ CLOCK/ RADIO DIGITAL
DISPLAY

2. FM STEREO LED LIGHT

3. DBBS LED LIGHT

4. REMOTE CONTROL SENSOR

5. SPEAKER-OUT SOCKETS
(LEFT & R IGHT)

6. HEADPHONE JACK

7. FM-ANTENNA WIRE

8. STAND (FOR UNIT)

9. AC-CORD & PLUG

10. POWER ON/ OFF SWITCH

11. TIME SET KNOB

12. FUNCTION SWITCH (RADIO/ CD)

13. CLOCK ADJUST “HOUR” KNOB

12

13

14

15 16

17

18

1920

21222324

25

26

11

10

1

89

2728

E-5

14. BAND SWITCH
(FM STEREO/ F M/ AM)

15. CLOCK ADJUST “MINUTE” KNOB

16. RADIO TUNING KNOB

17. CD “PROGRAM” KNOB

18. CD DOOR OPEN/CLOSE KNOB

19. CD “STOP” KNOB

20. CD “PLAY/ PAUSE” KNOB

21. CD “NEXT” KNOB

22. CD “BACK” KNOB

23. CD “REPEAT” KNOB

24. DBBS KNOB

25. VOLUME DOWN KNOB

26. VOLUME UP KNOB

27. SPEAKER (LEFT & RIGHT)

28. STAND (FOR SPEAKER)

18

24

20

19

26

25

10

22

21

2

3

4

5

67

2728