ETC Source Four User Manual

Copyright © 2008 Electronic Theatre Controls, Inc.
All Rights reserved.
Product information and specifications subject to change.
Part Number:
7060M1200-06.01
Rev C
Released: 2010-01
User Manual
Production Dates: September 2004 - Present
ETC intends this documen t, whet her prin ted or e lectroni c, to be prov ided in its ent irety.
i
ETC®, Emphasis®, Expression®, Insight™, Imagine™, Focus™, Express™, Unison®, Obsession® II, ETCNet2™, EDMX™, Source Four
®
, Revolution®, Sensor®, and WYSILink™ are either registered trademarks or trademarks
of Electronic Theatre Controls, Inc. in the United States and other countries.
All other trademarks, both marked and not marked, are the property of their respective owners.
Table of Contents
Basic Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Fixture information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Replacing the HPL Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Centering lamp and adjusting the field . . . . . . . . . . . . . . . . . . . .5
Focusing the beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Shaping the beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Rotating the barrel assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Adjusting the C-clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Adjusting the yoke position . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Cleaning Lens and Reflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Cleaning 14°, 19°, 26°, 36°, 50°, 70°, 90° and all EDLT glass lens-
es . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Cleaning 5° and 10° polymer lenses . . . . . . . . . . . . . . . . . . . . . .9
Cleaning the reflector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
ii
1
Basic Assembly
WARNING:
Please note the following safety warnings before use:
Do not mount the fixture on or near combustible surfaces.
Do not operate the fixture without a lens installed.
Always hang the fixture with the color frame retaining clip in the locked position.
Color frame holder
Beam focus knob
Color frame
Lens tube
Barrel assembly
Barrel rotation knob
Yoke locking knob
Lamp housing
assembly
Insulated handle
Reflector housing
Yoke
Retainer bolt
Shutters
Pattern holder slot
Drop-in iris slot
NOTE: Safety cable is included for cUL applications
Figure 1
Loading...
+ 11 hidden pages