ETC 7460A1060, 7460A1050, 7460A1051-1, 7460A1051-5, 7461A1051 User manual

User Manual

Production Dates: September 2004 - Present

Copyright © 2008 Electronic Theatre Controls, Inc.

All Rights reserved.

Product information and specifications subject to change.

Part Number:

7060M1200-06.01

Released: 2010-01

Picking# 7060M1001-C

Rev C

ETC intends this documen t, whet her prin ted or e lectroni c, to be prov ided in its ent irety.

Table of Contents

Basic Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Fixture information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Replacing the HPL Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Centering lamp and adjusting the field . . . . . . . . . . . . . . . . . . . .5

Focusing the beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Shaping the beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Rotating the barrel assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Adjusting the C-clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Adjusting the yoke position . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Cleaning Lens and Reflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Cleaning 14°, 19°, 26°, 36°, 50°, 70°, 90° and all EDLT glass lens-

es . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Cleaning 5° and 10° polymer lenses . . . . . . . . . . . . . . . . . . . . . .9

Cleaning the reflector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

ETC®, Emphasis®, Expression®, Insight™, Imagine™, Focus™, Express™, Unison®, Obsession® II, ETCNet2™,
EDMX™, Source Four
of Electronic Theatre Controls, Inc. in the United States and other countries.

All other trademarks, both marked and not marked, are the property of their respective owners.

i

®

, Revolution®, Sensor®, and WYSILink™ are either registered trademarks or trademarks

ii

Basic Assembly

Color frame holder

Beam focus knob

Color frame

Lens tube

Barrel assembly

Barrel rotation knob

Yoke locking knob

Lamp housing

assembly

Insulated handle

Reflector housing

Yoke

Retainer bolt

Shutters

Pattern holder slot

Drop-in iris slot

NOTE: Safety cable is included for
cUL applications

Figure 1

WARNING:

Please note the following safety warnings before use:

Do not mount the fixture on or near combustible surfaces.

Do not operate the fixture without a lens installed.

Always hang the fixture with the color frame retaining clip in the locked
position.

1