®
Source 4WRD™ LEDETC
White-Light LED Retrofit
GENERAL INFORMATION
Source 4WRD (Watt Reduction Device) LED is a replacement for a
standard Source Four
source to a white-light LED and provides a significant reduction in
power consumption. The simple and quick upgrade is nondestructive
and takes less than a minute. In most cases it can even be done
without breaking the fixture’s focus. Source 4WRD LED is theatrically
dimmable via DMX or line dimmable, with a traditional LED curve, to
allow flexibility for your installation. And, because it is an LED source,
your fixtures will run cool and efficiently without lamp replacements.
APPLICATIONS
• Energy saving retrofits
• Houses of worship
• Universities and schools
• Hospitality
• Retail
• Exhibition centers
• Meeting rooms
• Clubs
• Cafetoriums
• Theaters
®
burner assembly that will convert the HPL
ORDERING INFORMATION
Source 4WRD
MODEL DESCRIPTION
S4WRD Source 4WRD Retrofit Kit
S4WRDFB* Source 4WRD w/ Spot Fixture Body
S4WRDG Source 4WRD Gallery (90+ CRI) Retrofit Kit
S4WRDGFB* Source 4WRD Gallery (90+ CRI) w/ Spot Fixture
Body
S4WRDDG Source 4WRD Daylight Gallery (90+ CRI) Retrofit
Kit
* S4WRDFB ships with a fixture body, barrel and c-clamp. Lens tubes are sold
separately.
Connector Designation
Use suffixes below to specify factory–fitted connector type
MODEL DESCRIPTION
-A Parallel-blade U-ground connector
-B Two-pin and ground, 20 amp connector
-C Grounded, 20 amp, Twistlock
See back page for Source Four Accessories
®
connector
1 of 7
®
PRODUCT SPECIFICATIONS
Source 4WRD™ LEDETC
White-Light LED Retrofit
Source
LED details S4WRD LED
Max lumens 9,909 / 7,440 / 8,601
(3000K / 3000K Gallery / Daylight Gallery)
Lumens per watt 63.9 / 48.0 / 55.5
(3000K / 3000K Gallery / Daylight Gallery)
L70 rating (hours to 70%
output)
60,000 hours
Color
Colors Used Warm or Cool White
Color temperature range 3000K 80 or 90+ CRI, 5600K 90+ CRI
Calibrated array No
Red shift No
Optical
Field angle range 5° - 90°
Gate size 79.24mm
Aperture size Lens dependent
Pattern projection Ye s
Pattern size A or B (see manual)
Camera flicker control/Hz
range
No, not PWM dimmed
Control
Input method Line Voltage with DMX Control or Line Dimmed
Protocols DMX via RJ45
Modes (Footprint) 1 Channel (Intensity) for DMX
RDM configuration Yes
UI type 7-segment address display
Local control Yes
Onboard presets No
Onboard sequences No
Onboard effects No
Fixture to fixture control No
Notes Local level control via UI
Electrical
Voltage range 114V - 125V, 60Hz
Input method Hard wired, 1-meter cord, Edison plug
Inrush 30A (first half-cycle) at 120V
Fixtures per circuit 14 (20A switched circuit, R20 module or similar)
Wattage (Typical/Standby) 155W/1.2W
Current draw 1.35A at 120V
Notes When using line dimming, see the S4WRD Manual
for dimmer setup
When using line dimming, standby power is 0W
Thermal
Ambient operating temp 5-50° C (41-122° F)
Fan (controllable) Yes (no)
Droop compensation No
dB range 28dBa (average at 1 meter)
BTUs/hour 529
Physical
Materials Die-cast aluminum
Color options Black, white, silver or custom color
Mounting options Yoke
IP rating IP-20, indoor only
Weight 3.73 lbs (1.69 kg)
Included accessories Fixture body, barrel, c-clamp
Notes See accessories list for power cable options
Included accessories are only for fixture body (FB)
model numbers
Warranty
Retrofit Kit Three years
2 of 7
®
SPD (normalized to Y=100)
SPD (normalized to Y=100)
PRODUCT FEATURES
Source 4WRD™ LEDETC
White-Light LED Retrofit
EASY LED RETROFIT
Designed to turn any Source Four
incandescent fixture into an LED fixture in
seconds
MULTIPLE OPTIONS
Available in both 3000K and 5600K color
temperatures
COLOR METRIC INFORMATION
TM-30-15 - 80CRI
83
R
f
D
uv
-0.0006
96
R
g
CCT
2789
IMPRESSIVE OUTPUT
Output is as bright or brighter than a
575-watt extended life HPL lamp
2.5
2
1.5
1
0.5
0
380 430 480 530 580 630 680 730 780
Test source Reference source
λ (nm)
TM-30-15 - GALLERY 90CRI
90
R
f
D
uv
0.0009
99
R
g
CCT
3113
3 of 7
2.5
2
1.5
1
0.5
0
380 430 480 530 580 630 680 730 780
Test source Reference source
λ (nm)
®
COLOR METRIC INFORMATION
TM-30-15 - DAYLIGHT GALLERY 90CRI
91
R
f
101
R
g
100%
80%
60%
40%
Relative Power
20%
Source 4WRD™ LEDETC
White-Light LED Retrofit
SPECTRAL POWER DISTRIBUTION COMPARISON
Reference Source S4wrd Gallery Spot
D
uv
-0.0052
CCT
5570
Additional Color Metrics
STANDARD GALLERY DAYLIGHT GALLERY
CRI Ra (R9) 81 (9) 92 (59) 93 (73)
TLCI 66 92 95
0%
380 430 480 530 580 630 680 730 780
Wavelength (nm)
4 of 7
®
Source 4WRD™ LEDETC
White-Light LED Retrofit
PHOTOMETRICS
For full Source 4WRD photometry data, please view the Source 4WRD Photometry Guide at etcconnect.com
DEG S4WRD LED
LUMENS
5 6,577 4,938 5,708 5,247 9,370
10 7,482 5,617 6,493 6,678 11,925
14 7,696 5,778 6,679 7,196 12,850
19 6,818 5,119 5,918 6,261 11,180
19 EDLT 8,008 6,012 6,950 7,287 13,012
26 7,597 5,704 6,594 7,666 13,690
26 EDLT 9,502 7,134 8,248 8,631 15,412
36 8,959 6,726 7,775 7,974 14,240
36 EDLT 9,006 6,762 7,817 7,992 14,271
50 8,652 6,496 7,509 7,829 13,980
50 EDLT 8,446 6,341 7,330 8,085 14,437
70 9,909 7,440 8,601 9,033 16,130
90 9,843 7,390 8,543 7,395 13,205
S4WRD LED
GALLERY LUMENS
S4WRD LED DAYLIGHT
GALLERY LUMENS
HPL 575W/120X
LUMENS
HPL 750W/115V
LUMENS
5 of 7
ETC
®
ORDERING INFORMATION
Continued from front page...
Source Four Accessories
MODEL DESCRIPTION
400CC C–clamp
400PH-A Pattern holder (A size)
400PH-B Pattern holder (B size)
400PH-G Glass pattern holder
400SC Safety cable
400RS Drop-in iris
400CF Colorframe (6.25”)
400DN Donut (6.25”)
400TH Top hat
400HH Half hat
400GE Gel extender (Recommended for 19° and 26° only)
407GE Conical gel extender (requires 407CF below)
407CF 7.5” Square color frame (required for 14°, 70°, 90° and 407GE)
400FB Source Four fixture body, single clutch
W6538 RJ45 to Female 5-pin XLR adapter
W6539 RJ45 to Male 5-pin XLR adapter
N4086 RJ45 DMX Terminator
Note: For colors other than black or white, please call ETC.
Source 4WRD™ LED
White-Light LED Retrofit
Lens Tubes
MODEL DESCRIPTION
490LT 90º Lens tube with lens installed, Black
470LT 70º Lens tube with lens installed, Black
450LT 50º Lens tube with lens installed, Black
436LT 36º Lens tube with lens installed, Black
426LT 26º Lens tube with lens installed, Black
419LT 19º Lens tube with lens installed, Black
414LT 14º Lens tube with lens installed, Black
410LT 10º Lens tube with lens installed, Black
405LT 5º Lens tube with lens installed, Black
450EDLT 50º EDLT Lens tube with lens installed, Black
436EDLT 36º EDLT Lens tube with lens installed, Black
426EDLT 26º EDLT Lens tube with lens installed, Black
419EDLT 19º EDLT Lens tube with lens installed, Black
6 of 7
®
PHYSICAL
Source 4WRD Dimensions
MODEL HEIGHT WIDTH DEPTH
In mm In mm In mm
S4WRD/S4WRDG/S4WRDDG 5.59 142 7.00 178 6.29 160
S4WRDFB/S4WRDGFB with 26 deg. lens 21.07 535 13.36 339 23.76 604
Source 4WRD™ LEDETC
White-Light LED Retrofit
Source 4WRD Weights
*
MODEL WEIGHT SHIPPING WEIGHT
lb kg lb kg
S4WRD/S4WRDG/S4WRDDG 3.73 1.69 4.25 1.93
S4WRDFB/S4WRDGFB (no lens) 13.2 5.99 14 6.35
*Source 4WRD adds 2.05 lbs to the total fixture weight over a standard burner assembly.
Max. Height
Min. Height
14.38in
365mm
12.72in
323mm
9.87in
251mm
9.24in
235mm
17.39in
442mm
21.29in
541mm
Minimum
23.76in
Maximum (Maximum)
604mm
21.07in
535mm
(Maximum)
6.86in
174mm
13.36in
339mm
Corporate Headquarters n 3031 Pleasant View Rd, PO Box 620979, Middleton WI 53562 0979 USA n +1 608 831 4116
London, UK n Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK n +44 (0) 20 8896 1000
Rome, IT n Via Pieve Torina, 48, 00156 Rome, Italy n +39 (06) 32 111 683
Holzkirchen, DE n Ohmstrasse 3, 83607 Holzkirchen, Germany n +49 (80 24) 47 00-0
Hong Kong n Room 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong n +852 2799 1220
Web n etcconnect.com n Copyright©2018 ETC. All Rights Reserved. All product information and specifications subject to change. 7067L1001 Rev F 03/18
Protected by one or more of the following U.S. Patent Numbers 9,261,241 and 9,273,831
7.00in
178mm
5.59in
142mm
7 of 7
6.29in
160mm
5.36in
136mm
117mm
4.59in
Loading...