ETC 4M19L-1 Datasheet
ETC
®
Source Four Mini LED
4M Series
™
GENERAL INFORMATION
The Source Four Mini LED can go where no full-sized Source Four®
has gone before. ETC’s 12W Source Four Mini LED features the
same crisp optics, user-friendly functionality and sleek look of the
legendary Source Four fixture, but in a compact format at a fraction
of the size.
The Source Four Mini LED has four field-angle choices and comes in
a portable version with a miniature C-clamp and a canopy-mount
or track-mount design. Surprisingly bright for its size, the Mini LED
offers crystal-clear image projection and a bright, even field.
VENUES
• Museums
• Retail stores
• Restaurants
• Lobbies
• Light labs
• Theaters
FEATURES
• Rugged, die-cast fixture body
• Interchangeable lens tubes permit selection of 19°, 26°, 36°
and 50° field angles
• Uniquely efficient optical system
• Long-life dimmable white LED source available in:
- Source Four Mini LED: 80+ CRI
- Source Four Mini LED Gallery: 90+ CRI
- Source Four Mini LED 4K: 80+ CRI (Custom Order)
- Source Four Mini LED 5K: 80+ CRI (Custom Order)
• Three-plane shutters
• Multiple accessories available for color, pattern, and filtering
• Multiple mounting options: C-clamp, canopy and track
• Custom paint colors available; contact ETC
GENERAL
• ETL listed to the following standards
- Portable UL/cUL153
- Track mount UL/cUL1574
- Canopy mount UL/cUL1598
ORDERING INFORMATION
Source Four Mini LED
MODEL DESCRIPTION
4M19L 19° Source Four Mini LED (black)
4M26L 26° Source Four Mini LED (black)
4M36L 36° Source Four Mini LED (black)
4M50L 50° Source Four Mini LED (black)
*G 90+ CRI Gallery version
*4K 4000K version (Custom Order)
*5K 5000K version (Custom Order)
COLOR OPTIONS
-1 White
-5 Silver
Additional Ordering Information
MODEL DESCRIPTION
N/A Portable
-I Install canopy mount
-T Track mount adapter
Global or Halo
Compatible
Adapters
Example: 4M19L-1T for a Source Four Mini LED with a 19° lens in white with a
track-mount adapter
**AD1 Track adapter is compatible with Halo single circuit and two circuit track
systems.
Available with Global Trac Pro (GA69) or Halo
compatible (AD1)** adapters upon request
1 of 8
ETC
®
SPECIFICATIONS
PHYSICAL
• Die-cast aluminum construction (A380 grade)
• Fine-texture, high-temperature powder-coated paint
• Steel yoke with 0.406” diameter mounting hole
• Rotating shutter assembly ±175°
• E-size gobo pattern holder (included)
- 37.5mm with a 25.4mm image area
- Holds patterns up to .05” thick (1.27mm)
• Stainless steel, full hard shutters in a tri-plane assembly, 0.40mm (A301 grade)
• Fixed-beam angles to suit a range of throw distances
• Tool-free tilt and beam adjustment
• High-impact resistant, thermally insulated knobs and shutter handles
• Dual captive accessory slots for 2.75” (70mm) media frame (included)
• Portable:
- Yoke-mounted LED driver in color-matched enclosure (black adapter for silver fixtures)
- Miniature C-clamp mounting (included)- for use with 3/8” to 1” pipe (0.675” to 1.315” OD)
- 6’6” power cable with NEMA 5-15P connector
• Install canopy:
- Color-matched, powder-coated canopy mount with LED driver (included)
- Canopy dimensions: 5.31” (W) x 1.04” (H)
- Installation hardware included
- Fixture to canopy factory pre wired for easy install
- Built-in rotation stop to prevent cable damage
• Track mount:
- Compatible and ETL-listed for EUTRAC brand track
- EUTRAC (#98-549) two-circuit track adapter included
- LED factory-installed in color-matched adapter (black adapter for silver fixtures)
- For ceiling mount installations only
• Black or white power lead
• IP20 for Portable and Canopy versions
• IP40 for Track version
ELECTRICAL
• Power at full intensity: 12W typical, 14W max
• 18 AWG input wire size
• Input voltage options:
- 90-135V, 50/60Hz
- 190-250V, 50/60Hz
• Dimmable (forward and reverse phase)
• Inrush (first half-cycle)
- 120V: <1A
- 240V: <1A
LAMP
• Cree LED (Available in 80+ and 90+ CRI)
• Long-life lamp: 35,000 hours L70 lumen maintenance
• 3000K color temperature (standard)
OPTICAL
• Fixed-beam options of 19°, 26°, 36° and 50° field angles
• Projector-quality, high-contrast lenses
• Beam edge continually adjustable hard to soft
THERMAL
• 0°C to +40°C
Source Four Mini LED
4M Series
™
For dimming capatability, please go to: http://www.etcconnect.com/Support/Articles/Source-Four-Mini-LED-Dimming-Performance.aspx
2 of 8
ETC
Field Angle
Field Angle
®
Source Four Mini LED
PHOTOMETRY
19 degree
FIELD LUMENS BEAM LUMENS BEAM ANGLE FIELD ANGLE CANDELA LUMENS PER WATT
488 400 16.9 20.0 7,830 37
™
4M Series
THROW
DISTANCE
FIELD
DIAMETER
ILLUMINANCE
(FC)
ILLUMINANCE
(LUX)
10ft
3.0m
3.5ft
1.1m
78 35 20 13
843 375 211 135
15ft
4.6m
5.3ft
1.6m
20ft
6.1m
7.1ft
2.1m
25ft
7.6m
8.8ft
2.7m
16.9°
26 degree
FIELD LUMENS BEAM LUMENS BEAM ANGLE FIELD ANGLE CANDELA LUMENS PER WATT
490 399 22.6 26.8 4,440 37.1
20°
Beam Angle
THROW
DISTANCE
FIELD
DIAMETER
ILLUMINANCE
(FC)
ILLUMINANCE
(LUX)
10ft
3.0m
4.8ft
1.5m
44 20 11 7
478 212 119 76
15ft
4.6m
7.1ft
2.2m
20ft
6.1m
9.5ft
2.9m
25ft
7.6m
11.9ft
3.6m
3 of 8
22.6°
26.8°
Beam Angle
Loading...