ETA Systems MC12CM, MC1224CM, MC12F, MC8C Brochure & Specs

January 1999

THE IMAGENATION™ SERIES
MICROPROCESSOR
LIGHTING CONTROLLER

SYSTEMS

A Creative Light & Sound Company

Division of National Biological Corporation
1532 Enterprise Parkway • Twinsburg, Ohio 44087
330-425-3388 • 800-321-6699 • Fax: [phone]
http://www.etasys.com E-mail [e-mail]

MC1224CMMC12CM

TM®

The Imagenation™ Series from
ETA® Systems takes its cue from the

oldest business axiom for success:
do what you do best. Programming
is instantaneous so you can spend
your time creating with your
imagenation and concentrating on
being your best.

MC12F

Imagenation™ Series means instant
understanding. Imagine a line of
microprocessor controllers that fea­tures a simple three-step, one-finger
process that programs a scene in the
memory forever, or until repro­grammed. So you spend your time
creating with your imagination and
concentrating on being your best.

The Imagenation™ Series
Features:

• 24, 12 or 8 fully programmable
channels with the ability to store
and recall up to 152 scenes

• Used manually, these controllers
provide hands-on control and
instant creating

• MIDI In/Out/Thru interface with
sequencers, keyboards, etc.

• Ultraplex™ protocol (multiplex
signal–standard 3 pin microphone
cable)

• One-year limited warranty on
parts and workmanship

MC8C

Microprocessor Features:

• Non-volatile memory – program
stored until reprogrammed

• Programmable scenes

• Program and edit blind using hold
button feature -set current scene
in hold, reset scene manually,
release hold and fade to new
scene

• Scene pile-on feature – add
scene(s) to existing scenes to
create additional scenes

• Blackout control and fade to
blackout feature

• Up to 37 steps of chase
sequences using all channels of
light in each chase step

• Manual chase mode with elec­tronic speed adjustment

• Audio chase mode with electronic
sensitivity adjustment – sync to
the beat of the music with direct
line audio feed, speaker, mixer,
amplifier, CD player or tape deck,
as low as a 1/2 volt signal via a
standard 1/4" audio jack

All designs and specifications are subject to change without notice. Copyright © 1999 ETA Systems.

MC1224CM

MC12CM

MC1224CM Features:

• 24 control channels or 24 channels
2 scene manual

• 152 scene maximum programming
memory

• 8 scenes of chase with
37 programmable steps each

• 12 flash buttons

• Non-volatile memory

• Program lock

• Speed adjustable electronic chase

• Audio sync with sensitivity adjust­ment

• Adjustable real time crossfade

• Crossfade from manual to preset
scenes

• Program and edit blind

• Master control

• Fade to black out

• Pile-on

• Powered from dimmers or portable
power from 12V DC remote power
supply for remote

• Dimmer connects with 3 pin
standard microphone cable

• MIDI In/Out/Thru

• DMX 512

• Dimensions: 15 1/2" wide,
14 3/4" deep, 2 3/4" high (rear),
1 1/2" high (front)

• Shipping weight 13 lbs.

MC12CM Features:

• 12 control channels

• 16 scene max. programming
memory, 8 scenes and 8 scenes
of chase with 20 programmable
steps each

• 12 flash buttons

• Non-volatile memory

• Program lock

• Speed adjustable electronic
chase

• Audio sync with sensitivity adjust
ment

• Crossfade from manual to preset
scenes

• Program and edit blind

• Master control

• Fade to blackout

• Pile-on

• Powered from dimmers or portable
power from 12V DC remote power
supply

• Dimmer connects with 3 pin
standard microphone cable

• MIDI In/Out/Thru

• DMX 512

• Dimensions: 15 1/2" wide,
9 3/4" deep, 2 3/4" high (rear),
1 1/2" high (front)

• Shipping weight 12 lbs.

MC12F

MC12F Foot Controller Features:

• 12 control channels

• 4 scenes and 4 scenes of chase
with 20 programmable steps each

• Non-volatile memory

• Program lock

• Speed adjustable electronic

chase

• Audio sync with sensitivity adjust
ment

• Master control

• Fade to blackout

• Pile-on

• Powered from dimmers or
portable power from 12V DC
remote power supply

• Dimmers connect with 3 pin
standard microphone cable

• Dimensions: 15 1/2" wide,
9 3/4" deep, 2 3/4" high (back),
1" high (front)

• Shipping weight 12 lbs.

All designs and specifications are subject to change without notice. Copyright © 1999 ETA Systems.