Page 1
Etac Clean
Reconditioning instructions
78673A 16-11-15
Clean
Clean HRB
Clean 24”
Reconditioning/reuse
The frequency of inspection/reconditioning depends on how often and how intensively the product is used. Always use Etac's original parts. For more information about the
product, refer to the manual available at www.etac.com.
Remember that the service life of the product is limited (see manual). This is particularly important when instructing users who are expected to use the product for an
extended period of time.
Cleaning
Washing and cleaning instructions for the product are found on the product
as well as in the product's manual. When cleaning the chassis in a washer,
the product must be secured in an upright position with locked wheels.
Reconditioning
Inspection Deviation Solution
The product can be safely cleaned at 85°C for 3 minutes.
Clean the product with a solvent-free cleaning agent with a pH level between
5 and 9, or with 70% rubbing alcohol.
Clean HRB
Clean
Clean 24”
Chassis
Plastic back
Soft back
The chassis has paint damage Repair the damage with Etac's touch-up paint
The chassis has mechanical damage which
can affect the product's function/safety
The plastic back is damaged, has cracks,
burrs or sharp edges
The plastic back is not secured Tighten all screws to 3 Nm torque
Screw cannot be tightened Replace plastic back
The soft back is damaged, has tears, holes,
broken seams, broken snap locks
Scrap the product
Replace the plastic back
Replace the soft back
Page 2
Etac Clean
Reconditioning instructions
78673A 16-11-15
Reconditioning
Inspection Deviation Solution
Clean HRB
Clean
Clean 24”
Arm supports
Seat
Castor wheel/castor wheel attachment
Foot support
Height adjustment
Rear wheel adapter
Rear wheel
Brake
The arm supports are damaged, have cracks, burrs
or sharp edges
Arm supports are hard to fit/remove Clean arm support and mounting
Arm supports are hard to fit/remove
Arm support cannot be locked
The seat is damaged, has cracks,
burrs or sharp edges
The seat is not secured
Screw cannot be tightened Replace the seat
Castor wheel/castor wheel attachment is
damaged, has cracks, burrs or sharp edges
The tread is worn Replace the castor wheel
Castor wheel is stiff/does not rotate Clean castor wheel
Castor wheel is stiff/does not rotate Replace the castor wheel
The brake does not lock Replace the castor wheel
The castor wheel is not secured
Screw cannot be tightened Replace the castor wheel
The foot support is damaged, has cracks,
burrs or sharp edges
Wing nuts are loose Tighten the wing nuts
Wing nuts cannot be tightened Replace screw and wing nut
Rear wheel adapter is damaged, has cracks,
burrs or sharp edges
The rear wheel adapter is not secured Tighten the screws
Rear wheel is damaged, has cracks,
burrs or sharp edges
The tread is worn Replace rear wheel
Rear wheel is stiff Replace rear wheel
Rear wheel is not secured Tighten screw/nut
The brake is damaged, has cracks,
burrs or sharp edges
The brake does not lock Adjust the brake position
The brake does not lock Replace the brake
Replace the arm supports
Replace malfunctioning part (arm support,
seat, arm support lock)
Replace malfunctioning part (arm support,
seat, arm support lock)
Replace the seat
Tighten all screws under the seat to
3 Nm torque
Replace the castor wheel
Tighten all screws beneath the wheel
attachment to 4.5 Nm torque
Replace the foot support
Replace the rear wheel adapter
Replace rear wheel
Replace the brake
Loading...