ESYLUX PD-FLAT 360i/6 mini DALI, EP10427503, PD-C 360i/8 mini DALI, EP10427510 Operating Instructions Manual
MA00940001
09/2015
Operating instructions
PD-FLAT 360i/6 mini DALI
EP10427503
PD-C 360i/8 mini DALI
EP10427510
ESYLUX GmbH | An der Strusbek 40
22926 Ahrensburg | Germany
info@esylux.com | www.esylux.com
1
OPERATING INSTRUCTIONS
Table of contents
1 Using the manual 4
2 Safety instructions 4
3 Intended use 4
4 Description of the devices 5
5 Included in delivery 5
GB
6 Technical data 6
7 Operating elements 6
8 Maintenance 6
9 Cleaning 7
10 EC Declaration of Conformity 7
11 Activation 7
Installation types 7
Connecting the device 7
Wiring diagram 8
Factory settings 8
12 Operating mode 9
Automatic switch-on 9
Automatic switch-off 9
Switch-off delay time 10
Light value 10
Delay 10
Orientation light 11
PD-FLAT 360i/6 mini DALI
PD-C 360i/8 mini DALI
2 / 20
OPERATING INSTRUCTIONS
Switch-off warning 12
Fully automatic mode 12
Semi-automatic mode 13
100 h burn-in function 13
Corridor function 14
LED feedback 14
Sensitivity 14
Electronic ballast DALI parameters 15
Switch input 15
Master / slave function 16
Twilight switch mode 17
GB
Querying the active mode 18
Reset 18
13 Accessories 19
14 Disposal 20
15 ESYLUX manufacturer's guarantee 20
PD-FLAT 360i/6 mini DALI
PD-C 360i/8 mini DALI
3 / 20
OPERATING INSTRUCTIONS
1 Using the manual
This manual is intended to provide valuable information to you as the user and
integrator on how to use and configure the device and to take full advantage of the
range of functions.
Please store this manual with your documentation for the premises for future
reference so you can find the correct answer if questions arise.
If you have any questions that are still unanswered, please visit our website at
www.esylux.com or contact our technical helpline directly on +49 (0) 4102 489 489.
GB
2 Safety instructions
• CAUTION: Work on the 230 V power system must be performed by authorised personnel
only, with due regard to the applicable installation regulations / standards.
• Switchoffthepowersupply/DALIbusvoltagebeforeinstallingthesystem.
• Observetheapplicablesafetyregulationswhenworkingonelectricalsystems.
3 Intended use
The detector is designed to be connected to DALI systems to automatically control the
switching on or dimming of lighting according to ambient light or when movement /
presence is detected.
PD-FLAT 360i/6 mini DALI
PD-C 360i/8 mini DALI
4 / 20
OPERATING INSTRUCTIONS
4 Device description
The ESYLUX ceiling-mounted presence detector is a passive infrared presence
detector that responds to moving heat sources, such as people walking. The presence
detector is designed for small rooms and passageways that benefit from natural light.
Parameters can be configured using the ESYLUX Mobil-PDi/MDi and Mobil-PDi/MDi
universal remote controls as well as via the manual setting elements.
NOTE: Use this product only as intended (as described in the user instructions). The
device must not be changed, modified or painted – doing so will void any warranty
claims. You must check the device for damage immediately after unpacking it. If there
is any damage, you should not install the device under any circumstances. If you
suspect that safe operation of the device can not be guaranteed, you should turn the
device off immediately and make sure that it cannot be operated unintentionally.
GB
5 Included in delivery
Please check the contents of the delivery immediately after unpacking the device.
1. Presence detector
2. 2 x WAGO micro-terminals
3. Locking ring
4. Spring clamp
5. Screw
6. Tool
7. Holding disc for lens mask (PD-C360i/8 mini DALI only)
8. Lens mask to mask fields of detection (PD-C360i/8 mini DALI only)
PD-FLAT 360i/6 mini DALI
PD-C 360i/8 mini DALI
5 / 20
OPERATING INSTRUCTIONS
6 Technical data
PD-FLAT 360i/6 mini DALI / PD-C 360i/8 mini DALI
GB
Operating voltage DALI 16 V
Contact Max. 0.8 mm 2 / plug-in terminal
Protection type IP 55
Operating temperature range 0 °C to +50 °C
Approx. dimensions H 39 mm / mH 60 mm, Ø 33 mm
Installation bore diameter 25 mm
Communication Broadcast / non-addressable
7 Operating elements
The presence detector has no setting elements. The adjustable parameters can be
configured via remote control.
⎓
8 Maintenance
The presence detector has no serviceable parts.
PD-FLAT 360i/6 mini DALI
PD-C 360i/8 mini DALI
6 / 20
Loading...