Esu LokPilot 52600, LokPilot 52602 Quick Start Manual

Using „ mobile station“ with
ESU LokPilot 52600 / 52602

Using the Marklin item number 36330 you have the possibilit y to control all four function outputs of the
ESU LokPilot decoder and also have access to the decode r C Vs thr ough r egist er programming.

In order to do that, please proceed the following way:

1. Press the menu button, choose NEW LOC

2. Confirm with the scroll wheel.

3. Scroll to DATABASE.

4. Confirm with the scroll wheel.

Pict ure 1

Pict ure 2

Pict ure 3

5. Choose item 36330 and confirm.

6. Now locomotive Ee 3/3 is active in the

display. You can now start to set changes

(locomotive name, locomotive symbol, CV

settings). Please follow your mobile station

manual.

7. You get access to the change menu

thr ough scrolling to EDIT LO C. Ther e you

can find all submenus to change different

parameters.

Pict ure 4

Using „mobile station “ with ESU LokPilot 52600 / 52602 March 2 005

Pict ure 5

8. The register programming menu (REG)

allows you to change CV settings but not to

read out the pr ogrammed s ettings.

9. This is an example for setting register 4 to a

cer tain value (here 01).

Pict ure 6

Pict ure 7

10. The four function buttons at the left of the

display allow to activate all four functi on

outputs of LokPilot (see picture).

F1 = AUX1 Output

F2 = AUX2 Output

F3 = Shunting M ode

F4 = A cceleration/Deceleration on/off

Using „mobile station “ with ESU LokPilot 52600 / 52602 March 2 005