ESTEAM J-Series Parts List

Worldwide Leader in

Steaming Equipment Since 1940

Esteam®and J-Series

OWNER’S MANUAL

PRINTED IN THE USA

FORM #5500 - REVISION 8

Congratulations and Thank You!

Thank you for purchasing your Jiffy®Steamer from the world’s leading manufacturer of steaming equipment since 1940. We strive to engineer and manufacture the very best

steamer available backed by superior customer service. With proper maintenance and cleaning, your Jiffy Steamer will last through years of demanding use. Thank you again and we sincerely appreciate your business.

Warmest regards,

Jiffy®Steamer Company, LLC Made in the USA Since 1940

Table of Contents

Safety Instructions .....................................................................3

How to Steam..............................................................................4

Esteam

Jiffy Steamer Accessories ..........................................................9

Model J-1 & J-2 Jiffy Model J-2000 Jiffy Model J-4000 Jiffy Model J-1, J-2 & J-2000 Jiffy

Cleaning Instructions...............................................................28

Model J-4000 Jiffy Jiffy More Jiffy Jiffy Jiffy

Troubleshooting ..................................................................34-35

Jiffy

Product Specifications .............................................................40

Jiffy Jiffy

Hand Held Steamer.................................................5-8

Steamers .......................................10-15

Steamer .............................................16-21

Steamer .............................................22-27

Steamer Maintenance....................................................30

Steamer Steam Head Configurations .....................32-33

Steamer Cord Plug Configurations..............................33

Matrix Charts ...........................................................36-39

Steamer Warranty & Return Policy ............................41

Steamer Contact Information.......................................42

Steamer Accessories.............................................31

Steamer Cleaning Instructions.............29

Steamers

Important Jiffy®Steamer Safety Instructions

When using your Jiffy®Steamer, basic precautions should always be followed, including the following:

1. WARNING! Read all instructions prior to usage.

2. To reduce the risk of contact with hot water emitting from steam vents, check appliance before each use by holding it away from body and operating.

3. Use appliance only for its intended use. Steam only in an up and down vertical motion. Never use steamer in a horizontal position or tilt into a backward position, this may result in water discharge.

4. To avoid the risk of electric shock, do not immerse the appliance in water or other liquids.

5. Never tug cord to disconnect from outlet; instead grasp plug and pull to disconnect.

6. Do not allow cord to touch hot surfaces. Let appliance cool completely before storing.

7. Always disconnect appliance from electrical outlet when filling with water, emptying, and when not in use.

8. Do not operate appliance with a damaged cord, or if the appliance has been dropped or damaged. To reduce the risk of electric shock, do not disassemble or attempt to repair the appliance, take it to a qualified service person or return to the Jiffy repair could cause a risk of fire, electric shock or injury to persons when the appliance is used.

Steamer factory for examination and repair. Incorrect reassembly or

9. Close supervision is necessary for any appliance being used near children. Do

not leave appliance unattended while connected to power source.

10. Burns could occur from touching hot parts, hot water or steam. Use care when you empty a steam appliance as there may be hot water in the reservoir.

11. Indoor use only.

12. Never attempt to steam clothing while on body.

13. Never use an extension cord.

SAVE THESE INSTRUCTIONS

RISK OF BURNS

LISTED

COMMERCIAL

GARMENT STEAMER

579M

RISK OF ELECTRIC SHOCK

How to Steam

As your dry cleaner knows, steam is the gentlest, safest, most efficient method to remove wrinkles. Not only is steaming five times faster than ironing, it is guaranteed not to scorch even the most delicate materials and fabrics. Our steamers will remove wrinkles from clothing, drapery, tablecloths...virtually any fabric. Use the following information to help guide you to more proficient steaming.

Some articles can be steamed better from the underside. This allows the steam to relax the fibers of the material, thus removing the wrinkles.

When steaming, touch material lightly with steam head and wrinkles will vanish instantly. The combination of the warm, moist steam and the steam head is important for a smooth finish.

Always steam with the hose in an upright position so any condensation is free to flow back into the steamer. If steaming in a low position near floor, frequently extend hose up and out to keep hose clear of condenstation

Pants may be easily steamed by hanging them by the cuff. You may also use your Jiffy Steamboard to serve as a vertical pressing board to steam your garments.

Jiffy

Steamers are great for removing “closet crunch,” and they eliminate most trips to the drycleaner. Convenient hanger/hook clothes and steam head securely.

mechanism holds both

Esteam®Features and Directions.

Features

Includes:

• 3 times more powerful than any other hand-held steamer on the market

• Largest water reservoir available

• Wide mouth, easy-to-fill water tank

• 600-watt heating element; automatic safety

shut-off temporarily cuts unit off when it runs dry

• Uses plain tap or distilled water(no additives required)

Ownerʼs Manual

Steam Cap

• Comfortable, easy-to-grip handle

• Special outer housing for cool-to-thetouch operation

ESTEAM

Main Body

• No internal waterlines or pumps to become clogged by hard water

• 9-foot powercord for more manageable handling

• Fits neatly inside attaché or suitcase

• Available with a multiple plug converter for world travel

Directions for Use

1. Make sure your Esteam®is unplugged before filling.

2. Check to make sure the factory-installed red o-ring is secure inside the water tank before operating steamer (figure #1).

3. Fill with tap or distilled water to the full mark on the outside of the steamer. Never overfill. Never use water left overnight in steamer. Stale water causes foaming action and can create water droplets.

4. After filling, place steam cap on steamer and twist firmly until cap arrows align with arrows on the tank (figure #2). Make sure it is secure before operating unit.

5. Plug your Esteam

into proper voltage outlet. Steamer will start heating within 15 seconds, providing live steam from cold water within 2 minutes.

6. Always steam with a vertical up and down motion (figure #3).

Do not tilt unit forward or backward.

7. Avoid allowing steamer to run dry of water.

8. Refer to page 8 for complete cleaning instructions.

Figure 1

ESTEAM

Figure 2

Figure 3

WARNING: Never operate without water. Unplug after each use.

Esteam®Parts Diagram

Esteam®Parts Diagram Key

Should you ever need replacement parts for your Jiffy®Steamer, you may purchase them separately. Use this handy diagram and parts list to identify any part you may need. Please include model and serial number when ordering.

Jiffy Steamer List

Key# Part # Part Description Price

1 0653 Esteam 120 Volt 600 Watt Heater $ 17.00

with Gaskets and Nut

0655 Esteam 230 Volt 625 Watt Heater $ 17.00

with Gaskets and Nut

1a. Esteam Heater

(Sold with Item #0653 or #0655 as a Kit)

1b. Gasket for Esteam Heater

(Sold with Item #0653 or #0655 as a Kit)

1c. Nut for Esteam Heater

(Sold with Item #0653 or #0655 as a Kit)

2 0661 Red Inside O-Ring $ 1.50 3 0662 Black Outside O-Ring $ 1.50 4 0669 Esteam Water Tank $ 24.00 5 0640 Esteam 36 T-L263 Thermostat $ 6.75 6 0643 Fusible Link Clamp $ 1.50 7 0644 Fusible Link Clamp Screw $ 0.50 8 0641 Fusible Link Wire with Insulated Lug (Orange) $ 2.50 9 0681 Red Wire with Insulated Lugs $ 1.50

10 0645 Pilot Light with Wiring Harness

for 120 Volt Electrical Systems $ 7.00

0646 Pilot Light with Wiring Harness

for 230 Volt Electrical Systems $ 7.00

11 0647 Cord set (18/2 gauge) $ 7.00 12 0665 Right Case Half $ 14.00 13 0666 Left Case Half $ 14.00 14 0667 Four (4) Screws for Esteam Outer Case Halves $ 1.00 15 0663 Complete Steam Cap with Face Plate $ 20.00

ESTEAM

ACCESSORIES

0619 Voltage Converter for Travel $ 19.00 0898 Liquid Cleaner - 3 Ten (10) Ounce $ 15.00

Bottles per Package* *Not Available for Export.

ESTEAM Steam Caps with Face Plates and Case Halves are Available in Black or Pink.

Please specify color when ordering.

If you donʼt see the part you need, please contact us.

Esteam®Cleaning Instructions

Once you begin to see calcium scale collect in the bottom of your

ESTEAM to use the Jiffy®Steamer Liquid Cleaner. Please follow these instructions:

1. Pour 4 ounces of water in your ESTEAM®hand steamer.

2. Plug in the unit and bring to full steam.

3. Unplug the unit and allow to cool for 2 minutes.

4. Pour out all water.

hand steamer, it is time

5. Pour in 5 ounces (1/2 bottle) of the Jiffy

6. DO NOT STEAM THE UNIT WITH THE LIQUID CLEANER.

7. Leave the liquid cleaner in the unit for 3 hours.

8. Pour out the liquid cleaner solution.

9. Scrub with a stiff bristled brush to remove excess sediment as necessary.

10. Flush the unit 3 times with fresh water.

11. Resume steaming as normal.

Steamer Liquid Cleaner.

Jiffy®Steamer Accessories

Jiffy Travel Case

ITEM # 0890

Now you can take your Jiffy Steamer everywhere you go with our innovative Jiffy Steamer Travel Case. This case can be used with any model Jiffy Steamer and is ideal for transporting your steamer to trade shows, work sites, trunk shows, conferences and conventions. Never be without your Jiffy Steamer again! The Jiffy Steamer Travel Case is constructed with the finest materials to insure the protection of your steamer. External Dimensions: 25" x 17" x 11"

• Push-button retractable handle with comfort-grip

• Molded protective corners

• Heavy-duty, dual zippers with 1" pull tabs

• Premium twin in-line skate wheels.

• Large interior pocket for storing steam head and hose attachment

• Reinforced, interior adjustable straps to secure your Jiffy Steamer

Jiffy Steamer Professional Garment Hanger

ITEM # 0897

This unique Professional Garment Hanger design works in concert with your Jiffy® Steamer to prevent unsightly hanger marks and to facilitate the steaming process. They are ideal for retail showrooms, trade shows, traveling sales people,and residences. These high quality hangers will last you a lifetime.

Jiffy® Steamer Professional Garment Hangers are loaded with features including:

• Solid metal chrome construction

• Formed shoulders to prevent hanger marks

• Non Slip, adjustable, coated clips for pants and skirts

• 360 degree swivel hook

• Removable pants bar

Jiffy Steamer Magik Brush

ITEM # 1042

Jiffy Steamer Magik Brush quickly and effectively removes lint, fuzz, dust, dandruff and pet hair from clothing, bedding and upholstery. A comfort-grip handle and double-sided surface ensures longer brush life, twice the pick-up capacity of one-sided brushes, plus convenient left or right hand use. Keep your clothing and upholstery looking their best with this handy brush.

Jiffy Steamer Steam Spray

Gently fragrant and natural, Jiffy Steamer’s new,

Spray leaves your clothes and fabrics smelling fresh and clean. The Jiffy Spray is offered to you in three delightful fragrances, each made with high quality essential oils for a long lasting refreshing scent. The Jiffy #1054) captures the essence of a perfect day by the sea in a bottle. Jiffy Spray (item #1052) brings the freshness of Provence into your home, or try the Jiffy® Tickled Pink Steam Spray (item #1036) for the fresh scent of springtime. 32 ounce refill bottles are available for all scents.

scented Jiffy

Ocean Breeze scent (item

Lavender Steam

Steam

Jiffy Steamer Professional Lint Roller

ITEM # 1045

Our Professional Grade Lint Roller features a reusable comfort-grip handle and Super Tac2 Professional Strength Adhesive lint strips. The Zip Strip technology enables quick and easy sheet removal with no waste. The roll is 4 inches wide and 30 feet long. 1 handle and 1 roll per order. 3 part roll refills are available. Great for home, office or travel!

Accessories

Jiffy®J-1 and J-2 Model Steamer

FEATURES

• Cast aluminum housing for durability (Models J-1 and J-2)

• Lightweight, flexible hose - Models J-2 (J-1 series

utilizes a brass hat nozzle)

• Shatterproof water bottle

• Safety wiring feature temporarily turns the unit off if it

accidentally runs dry

• Comfortable, easy-to-grip handle

• Removes wrinkles up to five times faster than

conventional ironing

• Easy-roll casters for mobility (casters not included with

J-1 series)

• Numerous steam head attachments available

• 120 volt or 230 volt units available

• Backed by Jiffy

steamer need repair, send it to us and we will repair and ship the unit within 24 hours from its arrival to our plant

’s renowned customer service--should your

INCLUDES:

Ownerʼs

Rod Set

(not included with

J-1 series)

Manual

Assembly Wrench

Steam Head and Hose Attachment

(not included

with J-1

series)

Hat Nozzle (J-1 Models)

Water Bottle

J-2 Base Unit

Jiffy®J-1 and J-2 Model Steamer Directions

. For J-2 models, attach hose firmly with included

assembly wrench, which is magnetized and located on the bottom of the unit (figure #1). Assemble and attach hose hanger rod set. For J-1 models, the brass hat nozzle should already be attached. There is no rod set or hose attachment for J-1 models. been factory tested and it is not uncommon for small amounts of water to be in the unit.

Every Jiffy®Steamer has

2. Invert bottle of fresh tap or distilled water, plug into proper voltage

Figure 1

outlet, turn switch to lighted ON position and you will have steam within minutes. Never use your foot to turn steamer on/off. Never substitute the Jiffy®Steamer water bottle.

3. For easy operation, mount optional Jiffy®Steamboard to door or wall to hold clothing while steaming (figure #2). For hanging garments without optional Jiffy

Steamboard, simply install an eye screw or nail to inside of a doorway or directly onto a wall or you may use steamer’s rod set as shown in figure 3. Touch material lightly with steaming head and wrinkles will vanish instantly. The combined touch of the steaming head and the direct steam is very important. Some articles can be steamed better from the underneath side. Speed and efficiency is accomplished with a little practice. Always

Figure 2

steam with hose in an upright position, so any condensation is free to flow back into steamer. If steaming in a low position near floor, extend hose up and out frequently to keep clear of

condensation.

DO NOT ALLOW STEAMER TO RUN DRY.

4. Hang steam head in an upright position in the hose hanger section when not in use and turn switch to OFF (figure #3).

Figure 3

Figure 4

5. Periodically, pour old water out of steamer to avoid sediment buildup and maintain proper water level (figure #4). Remove hard water deposits with Jiffy®Liquid Cleaner. See page 28 for complete cleaning instructions.

NOTE: No two water supplies have the same mineral content. If your steamer begins to cut on and off during normal use, the thermostat is indicating the heating unit needs the sediment cleaned out.

WARNING: Never operate without water. Unplug after each use.

J-2

Jiffy®J-1 and J-2 Parts Diagram

Jiffy Steamer List

Key# Part # Part Description Price

1 1030 Rod Set and Nut Complete with Metal Studs $ 25.50

2 0035 Hook Section of Rod Set $ 6.50

0031 Hose Hanger Rod Set with Adapter Complete $ 25.50

0031A Hose Hanger Rod Set without Adapter Complete $ 21.50

0041 Base Adapter with Thumb Screw (for Old Style Rods Sets) $ 4.00

Jiffy®J-1 and J-2 Parts Diagram Key

Jiffy Steamer List

Key# Part # Part Description Price

3 0036 Middle Section of Rod Set $ 7.50 4 1033 Bottom Section of Rod Set (with Nut Attached) $ 13.50

5 0253 Plastic Steam Head/Handle Replacement Kit $ 22.00 6 0251 Plastic Head/Handle Hose Attachment Complete $ 50.00

7 0002 Painted Die Cast Aluminum Housing $ 51.50

8 0026A Plastic Water Bottle “B” without Check Valve Cap $ 5.75 9 0025 Plastic Water Bottle “B” with Check Valve Cap $ 9.50

10 0027A Replacement Check Valve Cap for Water Bottle “B” $ 3.75 11 0027B Replacement Check Valve Cap Baffle Only $ 0.25 12 0004 Round Beauty Ring $ 0.75

13 1125 Green Lighted Contura Rocker Switch 120 Volt $ 9.00

14 0132 Cord Set (16/3 gauge) with Strain Relief $ 9.50 15 0146B Cord Strain Relief $ 1.50 16 0028 Water Cup with 90 Degree Brass Fitting $ 18.00

17 0148 Internal Wire Set for Models with Green Contura Rocker Switch $ 9.00

18 0161A Heating Unit Assembly (no wiring included)

19 0030 Brass 90 Degree Elbow Joint $ 2.50 20 1130 3/8” x 1/4” Straight Brass Fitting for Heating Element Housing $ 2.50 21 0591 Copper Tube (4” length) with Nuts and Compression Rings $ 4.00

22 0160 L-290 Thermostat $ 8.00 23 0195 Fusible Link Clamp $ 1.50 24 0151 Fusible Link Wire with Insulated Lug and Clamp $ 3.00 25 0009 Bottom Plate with Casters $ 13.50 26 0011 Bottom Plate Casters (Set of 4) $ 6.50 27 0010 Screws for Bottom Plate (4 Screws Total) $ 0.75

ACCESSORIES

28 1026 “I” Kit - 5.5ʼ Hose with Four Attachments

0037 Bottom Section of Rod Set (without Nut) $ 7.50

0043 Metal Threaded Cap Screw for Rod Set $ 1.50 0039 Metal Threaded Stud for Rod Sections $ 1.50

0280 Hose Per Foot (Black in Color) $ 3.00

0023 Plastic Water Bottle “A” with Cap $ 6.50 0027 Replacement Cap for Water Bottle “A” $ 0.75

0122 Toggle Switch (3 Pieces) $ 7.50 0127 Red Neon Pilot Light with Lock Ring 120 Volt $ 4.00 0128 Red Neon Pilot Light with Lock Ring 230 Volt $ 4.00

1126 Green Lighted Contura Rocker Switch 230 Volt $ 9.00

0147 Internal Wire Set for Models with Front Red Light $ 9.00

0596 Heating Unit Kit (wiring included) for Models with Front Red Light

– 120 Volt Cord Set and 4” Water Line $ 81.50

0177A Heating Unit Kit (wiring included) for Models with Front Red Light

– 230 Volt Cord Set and 4” Water Line $ 81.50

0597 Heating Unit Kit (wiring included) for Models with Green Lighted

Rocker Switch - 120 Volt Cord Set and 4” Water Line $ 81.50

0597A Heating Unit Kit (wiring included) for Models with Green Lighted

Rocker Switch - 230 Volt Cord Set and 4” Water Line $ 81.50

– 120 Volt and 4” Water Line $ 62.50

0162A Heating Unit Assembly (no wiring included)

– 230 Volt and 4” Water Line $ 62.50

1191 Copper Tube (4 1/2” length) with Nuts and Compression Rings $ 4.00 0187 Copper Tube (5” length) with Nuts and Compression Rings $ 4.00

1050 Jiffy Steamer Assembly Wrench $ 4.00 0274 Brass Hat Nozzle Attachment $ 13.00 0254 Metal Head/Wood Handle Hose Attachment Complete $ 70.00 0256 Metal Head / Wood Handle Only $ 37.50 0269 Replacement Wooden Handle (for Metal Steam Heads) $ 7.00 0262 Wig Hose Attachment $ 58.00 1062 Steam Cleaning “B” Brush Hose Attachment $ 60.00 1063 Brush Only for the B” Hose Attachment $ 8.00 0899 Liquid Cleaner - 3 Ten (10) Ounce Bottles per Package* $ 15.00

*Not Available for Export.

If you donʼt see the part you need, please contact us.

J-1/J-2/J-200

Black

from

Cordset

White from Cordset

Brass Nuts

Ground Location

Cordset

Strain Relief

Green

White

Black from Cordset

White

Orange

Yellow

Element

Mounting

Screws

White Wire

Blue Wire

Orange Fusible Link

Brass Heating Unit

Yellow Wire

L-290

Thermostat

Jiffy®J-1 and J-2 Wiring Diagram

Caution:

Insure that the power cord is unplugged from the electrical outlet before attempting to repair your Jiffy

Steamer.

Jiffy®J-1 and J-2 Wiring Instructions

Before attempting any repair on a Jiffy Steamer product, make sure that it is unplugged from the outlet. If you have any questions, please contact our repair department at 1-800-525-4339 between 7:30 AM - 4:00 PM Central Standard Time.

Please note switch terminal 2, 3, 5 and 6 indicated on the enlarged switch diagram are marked on the actual switch. Jiffy® Steamers manufactured before May 2000 are not marked with the terminal switch numbers. Numbers in parenthesis refer to the drawing on on the right.

1. Insert cord set (1) into housing and connect black positive wire (2) from cord set to terminal number 5 on the switch.

2. Secure with grounding screw ground wire from cord set to the ground location on the housing (3).

3. Connect blue wire (4) from the right side of brass heating element (5) to right side of the L-290 thermostat (6).

4. Insert brass heating element unit into housing. Hand tighten the brass nuts (7) on the water line to the element and to the 90 degree fitting from the cup. Tighten 2 mounting screws (8) at the base of heating element. Now, use a 5/8” wrench to securely tighten the brass nuts on the water line to the element and to the 90 degree fitting from the water cup. Heating unit may be loosened and adjusted for a better fit if necessary.

5. Connect white wire (9) from the left side of the heater unit to terminal number 6 on switch.

6. Connect yellow wire (10) from the left side of the thermostat to terminal number 3 on the switch.

7. Connect white neutral wire (11) from cord set bundle to orange fusible link with plastic connector (12).

8. Connect other end of orange fusible link to terminal number 2 on the switch.

9. Set steamer upright and place black plastic strain relief (13) approximately 4 1/2” from end of cord set and insert into housing using pliers.

10. Secure bottom plate with four screws.

11. To avoid leakage, be sure to tighten hose (or hat nozzle) with wrench before using steamer.

Jiffy®J-2000 Model Steamer

FEATURES

• Polymer outer housing unit for durability

• Lightweight, flexible hose

• Shatterproof water caddy

• Safety wiring feature temporarily turns the unit off should it

accidentally run dry

• Comfortable, easy-to-grip handle

• Removes wrinkles up to five times faster than conventional

ironing

• Easy-roll casters for mobility

• Numerous steam head attachments available

• 120 volt or 230 volt units available

• Backed by Jiffy

steamer need repair, send it to us and we will repair and ship the unit within 24 hours from its arrival to our plant

’s renowned Customer Service--should your

Water Caddy

INCLUDES:

Rod Set

(Not included

with J-2000H series)

)

Owner's Manual

Steam Head and Hose Attachment (Not included with J-2000H series)

Assembly Wrench

Check

Valve Cap

J-2000 BaseUnit

Jiffy®J-2000 Directions

1. Attach hose firmly with included assembly wrench, which is magnetized and located on the bottom of the unit. Assemble and attach hose hanger rod set. Jiffy® Steamer has been factory tested and it is not uncommon for small amounts of water to be in the unit.

Every

2. Invert water caddy filled with distilled or tap water, plug into proper voltage outlet, turn switch to lighted ON position and you will have steam within minutes. Never substitute the Jiffy®Steamer water caddy.

3. For easy operation, mount optional Jiffy®Steamboard to door or wall to

hold clothing while steaming (figure #2). For hanging garments without optional Jiffy®Steamboard, simply install an eye screw or nail to inside of a doorway or directly onto a wall or you may use your steamer’s rod set as shown in figure 3. Touch material lightly with steaming head and wrinkles

will vanish instantly. The combined touch of the steaming head and the direct steam is very important. Some articles can be steamed better from the underneath side. Speed and efficiency is accomplished with a little practice. Always steam with hose in an upright position, so any condensation is free to flow back into steamer. If steaming in a low position near floor, straighten hose up and out frequently to keep clear of condensation. DO NOT

ALLOW STEAMER

Figure 2

Hang steam head in an upright position in the hose hanger section when not in use and turn switch to OFF (figure #3).

5. Periodically, pour old water out of steamer to avoid

sediment buildup and maintain proper water level (figure #4). Remove hard water deposits with Jiffy®Liquid

TO RUN DRY.

Cleaner. Wipe water cup out with a hand towel. See page 28 for complete cleaning instructions.

Figure 1

J-2000

Figure 3

Figure 4

NOTE: No two water supplies have the same mineral content. If your steamer begins to cut on and off during normal use, the thermostat is indicating the heating unit needs the sediment cleaned out.

WARNING: Never operate without water. Unplug after each use.

Jiffy®J-2000 Parts Diagram

8.2

8.1

Jiffy®J-2000 Parts Diagram Key

Key# Part # Part Description Price

1 1030 Rod Set and Nut Complete with Metal Studs $ 25.50 2 0035 Hook Section of Rod Set $ 6.50 3 0036 Middle Section of Rod Set $ 7.50 4 0037 Bottom Section of Rod Set $ 7.50

5 1102 Grounding Strap for Heating Element $ 1.50 6 0253 Plastic Steam Head/Handle Replacement Kit $ 22.00 7 0251 Plastic Head/Handle Hose Attachment Complete $ 50.00

8 1107 J-2000 Beige Housing Kit with Water Cup $ 58.00

8.1 1110 O-Ring for J-2000 Water Cup $ 3.00

8.2 1111 J-2000 Water Cup with 90 degree Bass Fitting and o-ring $ 18.00 9 1140 J-2000 Water Caddy Complete

10 1141 J-2000 Water Caddy Complete

11 0027A Replacement Check Valve Cap $ 3.75

12 0027B Replacement Check Valve Cap Baffle Only $ 0.25 13 1125 Green Lighted Contura Rocker Switch - 120 Volt $ 9.00

14 0132 Cord Set (16/3 gauge) with Strain Relief $ 9.50 15 0146B Cord Strain Relief $ 1.50 16 0148 Internal Wire Set $ 9.00

17 0161A Heating Unit Assembly (no wiring included) for

18 1131 Brass 90 Degree Elbow Joint - Extended Version $ 2.50 19 1130 3/8” x 1/4” Straight Brass Fitting for

20 0591 Copper Tube(4” length) with Nuts and

21 0160 L-290 Thermostat $ 8.00 22 0195 Fusible Link Clamp $ 1.50 23 0151 Fusible Link Wire with Insulated Lug and Clamp $ 3.00 24 1120 Bottom Plate with Casters $ 18.00 25 0011 Bottom Plate Casters (Set of 4) $ 6.50 26 1114 Screws for Bottom Plate (4 Screws Total) $ 0.75

ACCESSORIES

27 1050 Jiffy Steamer Assembly Wrench $ 4.00

0043 Metal Threaded Cap Screw for Rod Set $ 1.50 0039 Metal Threaded Stud for Rod Sections $ 1.50

0280 Hose Per Foot (Black in Color) $ 3.00

1108 J-2000 Beige Housing Kit without Water Cup $ 43.00 1107P J-2000 Pink Housing Kit with Water Cup $ 58.00 1108P J-2000 Pink Housing Kit without Water Cup $ 43.00 1107S J-2000 Silver Housing Kit with Water Cup $ 58.00 1108S J-2000 Silver Housing Kit without Water Cup $ 43.00

with Check Valve Cap $ 28.00

without Check Valve Cap $ 24.25

0004 Round Beauty Ring $ 0.75

1126 Green Lighted Contura Rocker Switch - 230 Volt $ 9.00

0597 Heating Unit Kit (wiring included) for Models with Green

0597A Heating Unit Kit (wiring included) for Models with Green

0162A Heating Unit Assembly (no wiring included) for

1026 “I” Kit - 5.5ʼ Hose with Four Attachments $ 90.00

0254 Metal Head/Wood Handle Hose Attachment Complete $ 70.00

0256 Metal Head / Wood Handle Only $ 37.50

0262 Wig Hose Attachment $ 58.00

1062 Steam Cleaning “B” Brush Hose Attachment $ 60.00

1063 Brush Only for the “B” Hose Attachment $ 8.00

0898 Liquid Cleaner - 3 Ten (10) Ounce Bottles per Package* $ 15.00

Lighted Contura Rocker Switch - 120 Volt Cord Set and 4” Water Line $ 81.50

Lighted Contura Rocker Switch - 230 Volt Cord Set and 4” Water Line $ 81.50

Models with Green Lighted Rocker Switch - 120 Volt Cord Set and 4” Water Line $ 62.50

Models with Green Lighted Contura Rocker Switch 230 Volt Cord Set and 4” Water Line $ 62.50

Heating Element Housing $ 2.50

Compression Rings $ 4.00

*Not Available for Export.

If you donʼt see the part you need, please contact us.

Jiffy Steamer List

J-2000

Black

from

Cordset

White from Cordset

Brass Nuts

Ground Location

Cordset

Strain Relief

Green

White

Black from Cordset

White

Orange

Yellow

Element

Mounting

Screws

White Wire

Blue Wire

Orange Fusible Link

Brass Heating Unit

Yellow Wire

L-290

Thermostat

Grounding

Strap

Green

Ground Wire

Jiffy®J-2000 Wiring Diagram

Caution:

Insure that the power cord is unplugged from the electrical outlet before attempting to repair your Jiffy

Steamer.

Jiffy®J-2000 Wiring Instructions

1. Insert cord set (1) into housing and connect black positive wire (2) from cord set to terminal number 5 on the switch.

2. Connect blue wire (4) from the right side of brass heating element (5) to right side of the L-290 thermostat (6).

3. Insert brass heating element unit into housing. Hand tighten the brass nuts (7) on the water line to the element and to the 90 degree fitting from the cup. Tighten 2 mounting screws (8) at the base of heating element. Now, use a 5/8” wrench to securely tighten the brass nuts on the water line to the element and to the 90 degree fitting from the cup. Heating unit may be loosened and adjusted for a better fit if necessary.

4. Place the copper 4 inch grounding strap as shown in drawing. Secure grounding strap and the green ground wire with the grounding screw by attaching to the heating element ground location (3).

5. Connect white wire (9) from the left side of the heater unit to terminal number 6 on switch.

6. Connect yellow wire (10) from the left side of the thermostat to terminal number 3 on the switch.

7. Connect white neutral wire (11) from cord set bundle to orange fusible link with plastic connector (12).

8. Connect other end of orange fusible link to terminal number 2 on the switch.

9. Set steamer upright and place black plastic strain relief (13) approximately 4 1/2” from end of cord set and insert into housing using pliers.

10. Secure bottom plate with four screws.

11. To avoid leakage, be sure to tighten hose (or hat nozzle) with wrench before using steamer.

Jiffy®J-4000 Model Steamer

FEATURES

• Built-in, easy-to-read sight gauge which indicates water level and sediment build-up.

• Cast aluminum housing unit for durability

• Corrosion-proof stainless steel boiler tank--no water lines to become clogged with hard water deposits

• Dual thermostats for preheat and steam settings.

• Safety wiring feature temporarily turns the unit off should it accidentally run dry

• Numerous steam head attachments available

• Backed by Jiffy

’s renowned customer service--should your

steamer need repair, send it to us and we will repair and ship the unit within 24 hours from its arrival to our plant

INCLUDES:

Steam Head and Hose Attachment

(Not included on J-4000H Series)

Owner's Manual

Rod Set

(Not included on J-4000H Series)

J-4000 Base Unit

Funnel

Assembly Wrench

Jiffy®J-4000 Directions

1. Attach hose firmly with included assembly wrench, which is magnetized and located on the bottom of the unit (figure #1). Assemble and attach hose hanger rod set (figure #2). For “H” series models, there will be no hose attachment or rod set to attach.

2. Using supplied funnel, add a maximum of four quarts of warm (fresh tap or distilled) water (cold water takes longer to preheat). Do not overfill. Plug into proper voltage outlet, turn switch to “PREHEAT”. Steamer will hold at this temperature, and the light will go off and on occasionally. NOTE: The J-4000 Steamer contains a large water reservoir for 2 hours of continuous steaming. Leave the switch in the “PREHEAT” position (figure #3) if you plan to use your steamer throughout the day. This will maintain water temperature in the reservoir.

3. Immediately after water is preheated, (red pilot light turns off) turn switch to “STEAM” position for steam in approximately 2 minutes. The combined touch of the steaming head and the direct steam is very important. Some articles can be steamed better from the underneath side. Always steam with hose in upright position so any condensation is free to flow back into steamer. If steaming in a low position near floor, straighten hose up and out

frequently to keep it clear of condensation. If steamer runs dry it will temporarily shut off. Once finished using the unit, turn the switch to the “OFF” position. If more water needs to be added to the steamer, allow steamer to cool before removing fill cap and adding more water. Never pour cold water on a hot element. Resume

Figure 3

“STEAM” position.

4. Hang steam head and hose in upright position in the hose hanger section (figure #4), turn switch to the “OFF” position (figure #3) and unplug the cord set when not in use.

5. Periodically, pour old water out of steamer to avoid sediment build up and maintain proper water level. Never have more than 4 quarts of water in steamer. If overfilled, water will boil up into hose. The Jiffy®Liquid Cleaner is recommended every 6 months to flush mineral deposits. See page 29 for complete cleaning instructions.

Every Jiffy®Steamer has been factory tested and it is not uncommon for small amounts of water to be in the unit.

WARNING: Never operate without water. Unplug after each use.

steaming by resetting the switch to the

Figure 1

Figure 2

Figure 4

J-4000

Jiffy®J-4000 Parts Diagram

* For models manufactured after March 2005.

Jiffy Steamer List

Key# Part # Part Description Price

1 1030 Rod Set and Nut Complete with Metal Studs $ 25.50

2 0035 Hook Section of Rod Set $ 6.50

1034 Rod Set and Nut Complete for Drapery Steamers $ 29.00

Jiffy®J-4000 Parts Diagram Key

Jiffy Steamer List

Key# Part # Part Description Price

3 0036 Middle Section of Rod Set (with Barrel Stud and Cap Screw) $ 7.50 4 1033 Bottom Section of Rod Set (with Nut Attached) $ 13.50

5 0253 Plastic Steam Head/Handle Replacement Kit $ 22.00 6 0251 Plastic Head/Handle Hose Attachment Complete $ 50.00

7 1301 J-4000 Die Cast Aluminum Housing $ 72.00

8 0004 Round Beauty Ring $ 0.75 9 0049 Water Fill Cap $ 6.50

10 0054 Housing Handle with Two Screws $ 7.00 11 0199 Rotary Power Switch and Knob $ 12.00 12 0201 Replacement Knob Only for Rotary Power Switch $ 1.50 13 1310 Red Neon Pilot Light (120 VOLT) $ 4.50

14 0133 Cord Set (14/3 gauge) with Strain Relief $ 9.50 15 0146C Cord Strain Relief $ 1.50 16 0050 Water Level Sight Gauge with Nuts and Washers $ 32.00

17 0074C Stainless Steel Boiler Tank Only $ 46.00 18 1370 19 0071 Boiler Tank Screw Set (Set of 30) $ 6.00

20 0075 Boiler Tank Gasket $ 8.50 21 0063 “W” Bend Heating Element (120 Volt, 1500 Watt) with Hardware $ 28.00

22 0203 Preheat Thermostat (L-170) $ 8.00 23 0204 Steam Thermostat (L-220) $ 8.00 24 0155 Internal Wire Set (Set of 5 Wires) for “W” Bend Element $ 8.00 25 0158 Fusible Link Wire with Insulated Cap and Clamp $ 3.00 26 1320 Bottom Plate with Four Casters $ 18.00 27 0017 Bottom Plate Screws (Set of 4) $ 0.75 28 0018 Bottom Plate Casters (Set of 4) $ 6.50

ACCESSORIES

29 1050 Jiffy Steamer Assembly Wrench $ 4.00

0037 Bottom Section of Rod Set (without nut) $ 7.50

0038 Additional Middle Section of Rod Set for Drapery Steamers $ 7.50 0043 Metal Threaded Cap Screw for Rod Set $ 1.50 0039 Metal Threaded Stud for Rod Sections $ 1.50

0280 Hose Per Foot (Black in Color) $ 3.00

0006 Hex Beauty Ring $ 0.75

0053 Funnel $ 3.50

1311 Red Neon Pilot Light (230 VOLT) $ 4.50

1353 Stainless Steel Boiler Tank Kit Complete (120 Volt/1500 Watts) $ 155.00 1354 Stainless Steel Boiler Tank Kit Complete (230 Volt/1500 Watts) $ 155.00

0074A Stainless Steel Boiler Tank with Sight Gauge (J-4) $ 78.00

Stainless Steel Boiler Tank Lid with 2 Brass Fittings and 2 Beauty Rings $ 28.00

0061 Boiler Tank Silicone Sealer (2.8 Fluid Ounces) $ 4.50 0062 Boiler Tank Silicone Sealer (10.1 Fluid Ounces) $ 8.00

0064 “W” Bend Heating Element (230 Volt, 1500 Watt) with Hardware $ 28.00

1026 “I” Kit - 5.5ʼ Hose with 1027 “I” Kit - 7.5ʼ Hose with

0259 Auto Hose Attachment with Dual Metal Heads $ 82.00 0257 Carpet Hose Attachment with 12” wide Metal Head $ 75.00 0252 7.5ʼ Drapery Hose Attachment with Plastic Steam Head $ 56.00 0255 7.5ʼ Drapery Hose Attachment with Metal Steam Head $ 76.00 0254 Metal Head / Wood Handle Hose Attachment Complete $ 70.00 0256 Metal Head / Wood Handle Only $ 37.50 0269 Replacement Wooden Handle (for Metal Steam Heads) $ 7.00 0262 Wig Hose Attachment $ 58.00 0274 Brass Hat Nozzle Attachment $ 13.00 1062 Steam Cleaning “B” Brush Hose Attachment $ 60.00 1063 Brush Only for the “B” Hose Attachment $ 8.00 0898 Liquid Cleaner - 3 Ten (10) Ounce Bottles per Package* $ 15.00

*Not Available for Export.

Four Interchangeable Steam HeadAttachment Four Interchangeable Steam HeadAttachment

s$90.00 s$96.00

If you donʼt see the part you need, please contact us.

J-4000

Jiffy®J-4000 Wiring Diagram

Caution:

Insure that the power cord is unplugged from the electrical outlet before attempting to repair your Jiffy

Steamer.

+ 58 hidden pages

ESTEAM J-Series Parts List

Specifications and Main Features

Frequently Asked Questions

User Manual