Estate TEP315R, TES325M, TES326R, TES355M, TES356M Dimension Guide

...

30" Freestanding Electric Range

PRODUCT MODEL NUMBERS OVERALL DIMENSIONS

CABINET OPENING DIMENSIONS

TEP315R TES325M TES326R

TES355M TES356M TES356R

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.

Electrical: When a 4-wire or 3-wire, single phase 120/240 volt, 60 Hz, AC only electrical supply is available (or, if specified on the model/serial rating plate, when a 4-wire or 3-wire single phase 120/208 volt 60 Hz, AC only electrical supply is available), a 40- or 50-amp maximum circuit protection is required, fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. The model/serial rating plate is located on the oven frame behind the storage drawer panel.

Ref. 9758377

08-10-05

A. 27

¹⁄₈

" (68.9 cm) depth with handle

B. 46

⁷⁄₈

" (119.1 cm) overall height C. 36" (91.4 cm) cooktop height D. 29

⁷⁄₈

" (75.9 cm) width E. 24

¹³⁄₁₆

" (63 cm) depth

A. 4" (10.2 cm) min. clearance from both sides of range to side wall or

other combustible material B. 18" (45.7 cm) upper side cabinet to countertop C. 13" (33 cm) max. upper cabinet depth D. 30" (76.2 cm) min. opening width

E. For minimum clearance to top of cooktop, see NOTE*.

F. 30" (76.2 cm) min. opening width

G. Outlet - 8" (20.3 cm) to 22" (55.9 cm) from either cabinet,

¹⁄₂

" (14.0 cm) max. from floor

⁷⁄₈

" (2.2 cm) min. required between cutout and cabinet door or hinge

*NOTE: 24" (61 cm) minimum when bottom of wood or metal

cabinet is protected by not less than ¹⁄₄" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.

30" (76.2 cm) minimum clearance between the top of the

cooking platform and the bottom of an unprotected wood or metal cabinet.