30" Freestanding Electric Range
PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
TES365H
TES366H
TES374H
TEP315K
TEP325K
TEP325G
TES325K
TES355K
Ref. 8053714
08-20-02
Because Whirlpool Corporation policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Electrical: Use 8-gauge solid copper wire. A
four-wire or three-wire, single-phase, 120/240volt, 60-Hz, AC-only, electrical supply is required
on a 40-ampere circuit, (or, if specified on the
model/serial rating plate, a four-wire or three-wire,
single-phase 120/208-volt, 60 Hz, AC-only
electrical supply is available, a 40-ampere circuit),
fused on both sides of the line. A time-delay fuse
or circuit breaker is recommended. The
model/serial rating plate is located on the oven
frame behind the drawer.
29-7/8" width
27-1/8" depth
with handle
46-7/8"
overall
height
24-13/16"
36"
cooktop
height
**Note: 24" min. when bottom of wood or metal cabinet is protected by not less
than 1/4" flame retardant millboard covered with not less than No. 28 MSG
sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.
30" min. clearance between the top of the cooking platform and the bottom of
an unprotected wood or metal cabinet.
Wall receptacle —
8" to 22" from either
cabinet, 5-1/2" max.
from floor. Position
receptacle as shown.
5-1/2"
max.
For minimum
clearance to the
top of the cooktop,
see Note.**
Do Not pinch the power
supply cord between the
range and the wall.
Do Not seal the range to
the side cabinets.
18" min.
clearance upper
cabinet to
countertop
13" max. upper
cabinet depth
30-1/8" opening
width
30" min. cabinet
opening width
4" min.
countertop
space to side
wall or other
combustible
material
CABINET OPENING DIMENSIONS