EStar America ESG601 User Manual

User’s Guide – ESG601 Glasses

The EStar America ESG601 DLP Link 3D Glasses allow you to experience 3D HDTV in unparalleled quality,
with full resolution and color. All you need to be fully immersed in 3D HDTV content is a 3D-Ready
computer or other 3D-Ready source, one of several DLP Link enabled projectors or televisions, and a pair
of ESG601 glasses.

The ESG601 shutter glasses synchronize to the display using DLP Link, a synchronization method that
improves brightness and eliminates the need for a separate emitter. The glasses are designed for ease of
use and simple maintenance, are rechargeable through USB, have a folding design for compact storage,
and have a cleanup-ready exterior safe for use with sanitizing wipes.

Features

 DLP Link sync includes support for new 144 Hz Triple Flash technology
 Lightweight design for a comfortable fit
 Batteries provide up to 60 hours of use per charge
 Large sensor window for a long viewing range
 Compatible with most 3D DLP projection systems and extensively tested with all Optoma

Technology DLP Link projectors

Copyright 2013 EStar America, LLC Page 1 of 9

The ESA ESG601 DLP-Link 3D Glasses.

ESG601 3D Glasses Manual

Charging Connector

Indicator Light

Power Button

DLP-Link Receiver

Window

The ESG601 LCD Shutter Glasses function with the BC100 3D Emitter and your 3D-Ready TV to provide
the ultimate in 3D stereoscopic viewing. This document describes the features, connection, setup, and
operation of the ESG601 LCD Shutter Glasses.

Features

 DLP-Link signal for 3D glasses performance that is better than infra-red based systems
 96, 100, 120, and 144 Hz “triple flash” capable for today’s and future 3D TVs and Projectors
 High contrast ratio, high uniformity and fast response time for excellent 3D experience
 Rechargeable battery provides up to 60 hours 3D viewing per charge

Copyright 2013 EStar America, LLC Page 2 of 9

Using the ESG601 3D Glasses

Battery Charging

To charge the ESG601, use the included USB-Power
cable with the custom connector. The custom
connector of the cable attaches to the DC connector on
the top of the left earpiece of the glasses (see photo to
the right). The red LED will turn on while the battery is
being charged. When the battery is fully charged, the
red LED will turn off. The other end of the cable may be
attached to any USB A-type port, such as a port on a USB hub, a computer, or the back of a TV. If
attached to a computer, the ESG601 will use the computer only to receive power; the glasses will not
appear as a device visible to Windows, Mac or other operating systems. The USB cable may also be
attached to a USB charger or a phone charger with an identical connector. The ESG601 battery is
designed to operate up to 60 hours on a full charge, and can be recharged completely in less than two
hours.

Power Button and LED Indicator Function

The inside left earpiece of the frames contains both the Power button and the red/blue LED Indicator
Light.

Copyright 2013 EStar America, LLC Page 3 of 9