How it Works
Essilor
Loading...
SL 300
User Manual
40 pgs1.33 Mb0

Essilor SL 300, SL 400 User Manual

www.essilor-instruments.com
User manual
CONTENTS
I. INTRODUCTION 5
1. General description 6
2. Instrument classification 6
3. Specifications 7
II. SAFETY AND PRECAUTIONS 9
1. Precautions 10
2. Safety marks 11
3. EMC precautions 11
4. WEE precautions 11
5. Technical specifications 12
6. Marks on device 12
7. Indicator lamp 13
8. Installation and working condition 13
9. Component list 13
10. Transport and storage 13
III. NOMENCLATURE 15
IV. ASSEMBLY 19
1. Main parts check list 20
2. Assembly procedure 21
3. Checking procedure 25
V. OPERATION PROCEDURES 27
1. Preparation for diopter compensation and IPD adjustment 28
2. Patient position and use of the fixation point 30
3. Base operation 30
4. Operation of illumination system 31
5. Tips of operation process 32
VI. CLEANING 33
1. Method 34
2. Cleaning cycle 35
VII. MAINTENANCE 37
USER MANUAL> CONTENTS
1. Protection 38
2. How to replace the fuse 38
3. How to replace the chinrest paper 39
4. Consumables 39
VIII. TROUBLESHOOTING GUIDE 41
IX. APPENDIX 43
USER MANUAL> CONTENTS
I. INTRODUCTION
The complete user manual is available on a web space.To access, please scan the QR code
below using a dedicated application.
Le manuel utilisateur complet est disponible sur un espace web. Pour y accéder veuillez scanner
le QR code ci-dessous à l'aide d'une application dédiée.
O manual do usuário completo está disponível na área web do cliente. Para acessar, scanear o
código QR abaixo usando a respetiva aplicação.
1. GENERAL DESCRIPTION
• This user manual is relevant for product ref SL300L and SL400L. It is based on relevant technical
specification and operation of the product.
• The classification of this instrument according to IEC 60601-1 is specified in this manual.
• Labels and marks required by IEC 60601-1 standard is stuck on the instruments and described in this
user manual.
• Working principle:
A beam of light attached to the slit lamp projects to the patients' eye, which forms an optical section of the living tissue of the eye, in this way the doctor can finish the observation and examination.
• Slit lamp microscopes are used to observe the disease of the anterior structures and tissue damage of
eyes.
2. INSTRUMENT CLASSIFICATION
This instrument is categorized to class I Type B according to IEC 60601-1 standard, which can not be used
under two circumstances:
1. A flammable anesthetic gas and air mixture,
2. Oxygen or nitrous oxide gas and air mixture.
This instrument can be powered continuously. It doesn't belong to category AP or APG.
SL300L / SL400L - Slit lamp microscope > V2 - 03-2018
6
USER MANUAL> I. INTRODUCTION
3. SPECIFICATIONS
a. Microscope
TECHNICAL DATA VALUE
Type Galilean type
Magnification change
SL300L: Three steps revolving drum
SL400L: Five steps revolving drum
Eyepieces 12.5X
Angle between eyepieces 13°
Total magnification ratio
SL300L: 10X, 16X, 25X
SL400L: 6X, 10X, 16X, 25X, 40X
Pupillary adjustment 52 mm ~78 mm
Diopter adjustment ± 6D
Field of view
SL300L: 25X ( 8.5 mm), 16X ( 13.5 mm), 10X ( 22 mm)∅ ∅ ∅
SL400L: 40X ( 5.5 mm), 25X ( 8.5 mm), 16X ( 13.5 mm), 10X ( 22 ∅ ∅ ∅ ∅
mm), 6X ( 34.7 mm)∅
b. Slit illumination
TECHNICAL DATA VALUE
Slit width Continuously variable from 0 to 14 mm (at 14 mm, slit becomes a circle)
Slit lenght Continuously variable from 1 mm to 14 mm
Aperture diameters 14 mm, 8 mm, 3.5 mm, 0.2 mm∅ ∅ ∅ ∅
Slit angle 0° - 180°
Filters Heat-absorbing filter, red-free filter, Cobalt blue filter
Lamp 3V / 3W LED lamp
Luminance ≥60 klx
c. Base
TECHNICAL DATA VALUE
Longitudinal movement 110 mm
Lateral movement 110 mm
Fine base movement 15 mm
Vertical movement 30 mm
USER MANUAL> I. INTRODUCTION
7
SL300L / SL400L - Slit lamp microscope > V2 - 03-2018
d. Chinrest
TECHNICAL DATA VALUE
Vertical movement 80 mm
Fixation target LED
e. Power
TECHNICAL DATA VALUE
Input voltage 220V / 110V ~ ± 10%
Input frequency 50Hz / 60Hz
Power consumption 10VA (max)
f. Output voltage
TECHNICAL DATA VALUE
Light 3V (continuously adjustable)
Fixation 3V
g. Dimension and weight
TECHNICAL DATA VALUE
Dimension 740 mm x 450 mm x 550 mm
Gross weight 22 Kg
Net weight 16 Kg
h. Environmental conditions
PHASE TECHNICAL DATA VALUE
Transport
Temperature -40°C ~+55°C
Atmospheric pressure 800 hPa ~ 1060hpa
Relative humidity ≤90%
Storage
Temperature -40°C ~+55°C
Atmospheric pressure 800 hPa ~ 1060hpa
Relative humidity ≤90%
Use
Temperature +5°C ~ +40°C
Atmospheric pressure 800 hPa ~ 1060hpa
Relative humidity ≤90%
SL300L / SL400L - Slit lamp microscope > V2 - 03-2018
8
USER MANUAL> I. INTRODUCTION
II. SAFETY AND PRECAUTIONS
General requirements for safety
Please read carefully about following precautions to avoid unexpected personal injury as well as the
product being damaged and other possible dangers.
1. PRECAUTIONS
1. In case there is any trouble, please first refer to the trouble-shooting guide. If it still can't work, please contact with the authorized distributor or our repair department.
2. Do not use this instrument in the environment prone to fire and blast or where there is much dust and with high temperature. Use it in room and simultaneously be careful to keep it clean and dry.
3. Check that all the wires are correctly and firmly connected before using. Ensure that the instrument is well grounded.
4. Please pay attention to all the ratings of the electrical connecting terminal.
5. Turn OFF the main power first before replacing the main bulb, flash lamp and fuse.
6. When replacing the power cable, please use the power cable in accordance with the notes in the instruction manual.
7. Don't touch the surface of the lens and prism with hand or hard objects.
8. Pease be careful when using the moving parts of the slit lamp, in case that the movement of the base or microscope arm hurts people.
9. To prevent the instrument from falling down to floor, it should be placed on the floor where the inclination angle is less than 10°.
10.Please deal with the waste disposal produced by the machine following relevant laws and regulations.
11.Read carefully the safety and other signals on this machine in order to use the product safely.
SL300L / SL400L - Slit lamp microscope > V2 - 03-2018
10
USER MANUAL> II. SAFETY AND PRECAUTIONS
2. SAFETY MARKS
The safety marks, icons and warning symbols stuck on this instrument.
MARK DESCRIPTION
Type B
Manufacturing date
Class I The slit lamp is class I medical device
Type B English form of B type
WEEE mark: Please deal with the waste disposal produced by the machine following
relevant laws and regulations.
CE marking according to applicable directives
Date of first marking 12/2015
PN Part number
SN Serial number
I Power ON
O Power OFF
Output At the back of power supply box, indicate outlet of the power
Input At the back of power supply box, indicate input of the power
Fuse Rated value and current value (F1AL250V)
Power At the front of power supply box, switch the power ON and OFF
Voltage selector Switch the input voltage from 110V to 220V
The mark of light dimmer
3. EMC PRECAUTIONS
Other medical instruments and equipment which needs to be installed on the same site using with this
instrument shall comply with the same electromagnetic compatibility principle. The equipment which is
unable to comply with the electromagnetic compatibility or is known with poor electromagnetic compatibility
shall be installed 3 meters at least away from this equipment and powered by different power supply.
4. WEE PRECAUTIONS
Please dispose the waste electrical and electronic equipment in accordance with relevant regulations and
laws.
USER MANUAL> II. SAFETY AND PRECAUTIONS
11
SL300L / SL400L - Slit lamp microscope > V2 - 03-2018
5. TECHNICAL SPECIFICATIONS
The slit lamp microscope is powered by network power supply. The following marks are required
permanently affixed to the instruments according to IEC 60601-1 Standard. The following table lists the tips
for your reference.
N° CONTENT INSTRUCTIONS
1 Manufacturer/ supplier Not brand
2 Figure /icon/ mark Detail in safety marks table
3 Connect to main power Detail in power specification
4 Power frequency, Hz Detail in power specification
5 Input power frequency Detail in power specification
6 Network output power N/A
7 Classification Detail in safety marks table
8 Working time No indication, work continuously
9 Fuse Detail in safety marks table
10 Output Detail in safety marks table
11 Physiological reaction No indication. N/A
12 AP/AGP type device No indication. N/A
13 High pressure terminal device No indication. N/A
14 Cooling condition No indication. N/A
15 Mechanical stability No indication.
16 Protective packing
Transportation are affixed to the outer packing carton,
which includes up, fragile, afraid of the rain, stacking
limit, stacking weight limit and so on.
6. MARKS ON DEVICE
The marks on power box of slit lamps.
MARK DESCRIPTION
Protective earth terminal
SL300L / SL400L - Slit lamp microscope > V2 - 03-2018
12
USER MANUAL> II. SAFETY AND PRECAUTIONS
7. INDICATOR LAMP
There is indicator lamp on power switch. Green light indicates the power is on, and the instrument is
working.
• Model SL300L, when operating at maximum intensity, exceeds the threshold set by the safety
guidelines after 168 seconds.
• Model SL400L, when operating at maximum intensity, exceeds the threshold set by the safety
guidelines after 168 seconds.
8. INSTALLATION AND WORKING CONDITION
Slit lamps are network powered medical instrument. Please check pert the checking list after opening the
carton and install the instrument according to this user manual. Test and ensure the instrument operating
well before putting to use.
9. COMPONENT LIST
The following electronic components are used in this instrument.
N° COMPONENT NAME
1 Annulus transformer
2 Light dimmer potentiometer
3 SCR circuit boards
4 Power switch with indicator
5 Metal output socket with four pins
6 220V / 110V input voltage selector
7 Network power input socket
8 Light sauce (halogen/ LED lamp)
9 Fixation point
10 Fuse
11 Protective earth terminal
10. TRANSPORT AND STORAGE
No special requirements besides the content about transportation and storage of IEC 60601-1 standard.
USER MANUAL> II. SAFETY AND PRECAUTIONS
13
SL300L / SL400L - Slit lamp microscope > V2 - 03-2018
Loading...
+ 28 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use