Essex Incorporated MOCS Owner's Manual

essex inc.

M A C H I N E T O O P E R A T O R

C O M M U N I C A T I O N S Y S T E M

OWNER’S MANUAL

MOCS Owner’s Manual

TABLE OF CONTENTS

PLC System Specifications 2

CPU System Specifications 3

Overview 5

Installation 6

Operation 7

Spare Parts 9

Troubleshooting 10

Precautions 10

Options 11

PLC SYSTEM SPECIFICATIONS

Power Supply
Voltage / frequency

Operating
Voltage range

Power
Consumption

Inrush current 60 A max.

External power supply Voltage

Insulation resistance 20 mega ohms min. at 500

Noise resistance 1500 V (peak to peak) with

Dielectric strength 2300 VAC at 50/60 Hz for

AC
DC

AC
DC

AC
DC

Output capacity

100 to 240 VAC, 50/60 Hz
24 VDC

85 to 264 VAC

20.4 to 26.4 VDC

60 VA max.
20 W max.

24 VDC
200 mA

VDC between AC terminals
and ground terminal

a pulse width of 0.1 to 1
microsecond 1 nanosec­ond rise time pulse (tested
with noise simulator)

one minute with leakage
current of 10 mA max. be­tween all the external AC
terminals and ground ter­minal

Vibration resistance 10 to 57 Hz width and am-

plitude of 0.075 mm, and
57 to 150 Hz with an accel­eration of 9.8 m/s2 (IG) in
X, Y, and Z directions for
80 minutes each (ie. Swept
for 8 minutes, 10 times)

Shock resistance 147 m/s2 (15 G) in X, Y

and Z directions 3 times
each.

Operating Conditions Ambient temperature 0 to 55 degrees C (32 to

122 degrees F)

Ambient humidity 10% to 90% (no condensa-

tion)

Ambient environment With no corrosive gas

Storage conditions Ambient temperature -20 to 75 degrees C

(-4 to 165 degrees F)

Power supply holding time 10 ms minimum for AC

models and 2 ms minimum
for DC models

2

CPU SPECIFICATIONS

CPU Feature Summary

Form Factor Mini-ITX, compatible with microATX (6.75 inches by 6.75 inches

171.45 millimeters by 171.45 millimeters])
Processor Support for the following:

• Soldered-down Dual-Core Intel® Atom® processor
Memory • One 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) socket

• Support for DDR2 533 MHz and DDR2 400 MHz DIMMs (DDR2 800 MHz
and DDR 667 MHz validated to run at 533 MHz only)

• Support for up to 2 GB of system memory
Chipset Intel® 945GC Chipset, consisting of:

• Intel® 82945GC Graphics Memory Controller Hub (GMCH)

• Intel® 82801GB I/O Controller Hub (ICH7)
Audio 5.1-channel audio subsystem using the Realtek* ALC662 high definition
audio codec

Video Intel® GMA950 onboard graphics subsystem
Legacy I/O Control SMSC LPC47M997 based Legacy I/O controller for hardware manage-

ment, serial, parallel, and PS/2* ports
Peripheral Interfaces • Four USB 2.0 ports

• Two Serial ATA (SATA) headers

• One serial port

• One parallel port

• One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support

• PS/2 keyboard and mouse ports

• One S-Video output port (not available on the D945GCLF2D desktop
board)
LAN Support 10/100/1000 Mbits/sec LAN subsystem using Realtek 8111C GbE LAN
adapter device
BIOS • Intel® BIOS (resident in the SPI Flash device)

• Support for Advanced Configuration and Power Interface (ACPI), Plug

Expansion Capabilities • One PCI Conventional bus connector
Hardware Monitor • Hardware monitoring through the SMSC I/O controller
Subsystem • Voltage sense to detect out of range power supply voltages

• Thermal sense to detect out of range thermal values

• Two fan headers

• Two fan sense inputs used to monitor fan activity

• Fan speed control and Play, and SMBIOS

3