Essential Medical Supply W1630, The Blazer User Manual

ITEM # W1630

Made in China

2011 ESSENTIAL MEDICAL SUPPLY, INC.

®

Manufactured for

Orlando, FL 32822

Aluminum Four Wheel Walker

Our name says it all!

Page 1

-- SAVE THESE INSTRUCTIONS --

SET UP INSTRUCTIONS

1. Remove all contents from carton and remove protective packaging.
The carton should contain the following:

Do not use the walker if there is apparent damage and / or if
parts are missing.

Please call place of purchase for repair / return information.

Do not attempt to adjust or operate your walker without
carefully reading all instructions in this manual. If, after reading this
manual, you have any questions, please call your place of purchase or
Essential Medical at [phone].

Height Adjustment

Knobs (2) with
Bolt & Washer

Hinged Folding

Mechanism

Loop Brakes Handles

are attached to the

Frame by Cables (2)

Backrest

Backrest

Bracket

Plastic Tray

Basket

Serial No. Label

on back

(Silver label, number

starts with “C”)

Page 2

2. Open frame by separating the hook & loop strap and pushing down
on the hinged folding mechanism so that the hinged bar is level.

SET UP INSTRUCTIONS

3. Insert the backrest, handles and basket.
(a) To insert the backrest, push clip button on side of the backrest

and insert backrest into the brackets on the front of the walker
frame. Once the backrest is properly installed, the pins should
click into place and they should protrude through holes of
both brackets. Check to see that the backrest is secured in
both brackets.

(b) Unscrew height adjustment knobs from handles and insert

handles into the frame of the walker while making sure the
cable are on the outside of the frame.

(c) Adjust the handle height as directed by your physician,

physical therapist or trained professional. Insert the bolt from
inside of the frame so that the hex head ts snugly into the
hex shaped hole in the frame.

(d) On the outside of the frame, place the washer on the bolt and

rmly screw the knob until fully tightened, making sure that the
bolt head is still securely recess in the frame.

(e) Place the basket under the seat of the walker.

Height Adjustment

Knobs (2) with
Bolt & Washer

Hinged Folding

Mechanism

Loop Brakes Handles

are attached to the

Frame by Cables (2)

Backrest

Backrest

Bracket

Plastic Tray

Basket

Serial No. Label

on back