Essential Garden LT-9062-1 Owner's Manual

Your Finished enjoy your Bench

Starting the assembly processes

1. Turn over the seat

2. Place the 4 TPR washers to the position as shown in the picture
to below

3. Turn over the leg then put it on the seat

4. Align the hole on the leg with the seat and TPR washer hole

5. Install metal washers on to the leg

6. Use the Hex Key Wrench to fasten the screws

Repeat steps 1-6 on the other side of the bench so you have
both leg assemblies installed.

Curved Bench

Assembly Instruction

After unpacking the Curved Bench from the packing material
locate the following parts to insure you have everything to
assemble the bench your package will contain the following
bench components as shown in Picture to below:

Assembly Hardware

After unpacking the Bench from the packing material locate the
following assembly hardware and set it out as shown in the picture
to below：

1 EA. Hex Key Wrench
8 EA. TPR Washers
8 EA. Screws

8 EA. Metal Washers

1 EA. Bench Seat
2 EA. Bench Leg
1 EA. Bag of assembly hardware

owner’s
manual

Date of purchase: _____/ _____/ _____

CURVED BENCH

Caution:
Product code: 820-02649837-8
UPC code: 713022906211

Made in / Hecho en CHINA for Kmart Corporation, Homan Estates, IL 60179

SHOP kmart.com

See our extensive assortment of outdoor living products

on-line at www.sears.com and www.kmart.com

For questions or comments about product:

Email: [e-mail] or Call toll-free: 1-800-933-0527

Please refer to part numbers when reordering