Esselte DYMO LP300, LabelPoint 300 Instructions For Use Manual

Download

Page 1

DYMO LP300

Electronic

Labelmaker

Instructions for Use

Etiqueteuse

Electronique

Guide D‘Utilisation

Etichettatrice

Elettronica

Istruzioni per l'uso

Máquina de

Rotular Electrónica

Instrucciones

Etiquetadora

Electrónica

Instruções

Electronische

Labelmaker

Gebruikershandleiding

Elektronik

Etiketleme Makinası

Kullanım Talimatı

Page 2

123456 A e ¢£¥$# B@ \

—

  ¿

C“ ´ ; : ‘ ° D% + – ! / ? E1/2x÷±<> F

234567

|& H ◗❒❑❅☺ I()# ™© ® J Y µ K λ

L Ω M

★

O Ğğ İı P i çÇ^ ß ~ Qабвгде RАБВГДЕ Sтуфхцш TOТУШХЦ UийклИЙ VКЛмноп W | МНПщъ Xû üÙÚÜφ Y æÆœŒ ñÑ Z yÿY o p∂

CLEAR

CAPS BFONT MR VERT COPIES BCODE

TALIC OLINE SHADOW ULINE BOX PATTERN

JUST

LTH

CAPS

STYLE

VERT

DEL SIZE

BOXES

SAVE RECALL

PREVIEW

COPIES

PATTER

ALIGN

BARCODE

(

)

➌

➊

➋

➊

= 6 mm

= 19 mm

= 9/12mm

➋

➌

❹

➎

'CLICK!'

➊

➌

➋

Page 3

CLEAR

CAPS BFONT MR VERT COPIES BCODE

TALIC OLINE SHADOW ULINE BOX PATTERN

SPAC

TUVW

GH IJK

JUST

LTH

CAPS

STYLE

VERT

DEL SIZE

BOXES

SAVE RECALL

PREVIEW

COPIES

PATTER

PG BRK

ALIGN

BARCODE

SYMBOL

‘AZERTY’

CLEAR

CAPS BFONT MR VERT COPIES BCODE

TALIC OLINE SHADOW ULINE BOX PATTERN

SPACE

TUVW

GH IJK

JUST

LTH

CAPS

STYLE

VERT

DEL SIZE

BOXES

SAVE RECALL

PREVIEW

COPIES

PATTERN

PG BRK

ALIGN

BARCODE

SYMBOL

‘QWERTY’ (EU)

Page 4

This product is CE marked in accordance with the EMC directive and the low voltage directive and is designed to conform with the following international standards:

Safety – EN 60950, IEC 950, UL 1950 EMC emissions – EN 55022 Class B, CIS PR22 Class B,

FCC pt15 Sub pt B Class B

EMC immunity – EN50082-1, IEC801-2 & IEC801-3

Accessoires

Cassettes ruban Dymo D1 Largeur: 6mm 9mm 12mm 19mm

(

/4")(

/8")(

/2")(

/4")

Longueur: 7m 7m 7m 7m

Noir/Transparent 43610 40910 45010 45800 Bleu/Transparent ––––– ––––– 45011 ––––– Rouge/Transparent ––––– ––––– 45012 ––––– Noir/Blanc 43613 40913 45013 45803 Bleu/Blanc ––––– 40914 45014 45804 Rouge/Blanc ––––– 40915 45015 45805 Noir/Bleu ––––– 40916 45016 45806 Noir/Rouge ––––– 40917 45017 45807 Noir/Jaune 43618 40918 45018 45808 Noir/Vert ––––– 40919 45019 45809 Blanc/Transparent ––––– ––––– 45020 45810 Blanc/Noir ––––– ––––– 45021 45811 Noir/Argenté ––––– ––––– 45022 45812 Noir/Doré ––––– ––––– 45023 45813 Noir/Vert fluo ––––– ––––– 45024 ––––– Noir/Rouge fluo ––––– ––––– 45025 ––––– Adaptateur C.A. 40076

Cette machine porte le label CE en accord avec la directive EMC et la directive basse tension. Elle a été conçue en conformité avec les normes internationales suivantes :

Sécurité : EN 60950, IEC 950, UL 1950 Emissions EMC : EN 55022 Classe B, CIS PR22 Classe B,

FCC pt15 sub ptB Classe B Immunité EMC : EN 50082-1, IEC 801-2 & IEC 801-3

Accessori

Cartucce nastro Larghezza: 6mm 9mm 12mm 19mm

(

/4")(

/8")(

/2")(

/4")

Lunghezza : 7m 7m 7m 7m

Nero/trasparente 43610 40910 45010 45800 Blu/trasparente ––––– ––––– 45011 ––––– Rosso/trasparente ––––– ––––– 45012 ––––– Nero/bianco 43613 40913 45013 45803 Blu/bianco ––––– 40914 45014 45804 Rosso/bianco ––––– 40915 45015 45805 Nero/blu ––––– 40916 45016 45806 Nero/rosso ––––– 40917 45017 45807 Nero/giallo 43618 40918 45018 45808 Nero/verde ––––– 40919 45019 45809 Bianco/Trasparente ––––– ––––– 45020 45810 Bianco/Nero ––––– ––––– 45021 45811 Nero/Argento ––––– ––––– 45022 45812 Nero/Oro ––––– ––––– 45023 45813 Nero/Verde fluo ––––– ––––– 45024 ––––– Nero/Rosso fluo ––––– ––––– 45025 –––––

Adattatore 40076

CERTIFICATO DEL PRODUTTORE/IMPORTATORE

Con il presente documento si certifica che l’etichettatrice DYMO è conforme alle disposizioni della Norma 1046 sulle interferenze elettriche. Alla Bundespost è stata notificata la messa in commercio dell’apparecchio ed è stata concessa l’autorizzazione alla verifica dell’effettiva conformità alle Norme. 87/308/EEC.

Accessories

Tape cassettes Width: 6mm 9mm 12mm 19mm

(

/4")(1/4")(

/8")(

/2")

Length: 7m 7m 7m 7m

Black/Clear 43610 40910 45010 45800 Blue/Clear ––––– ––––– 45011 ––––– Red/Clear ––––– ––––– 45012 ––––– Black/White 43613 40913 45013 45803 Blue/White ––––– 40914 45014 45804 Red/White ––––– 40915 45015 45805 Black/Blue ––––– 40916 45016 45806 Black/Red ––––– 40917 45017 45807 Black/Yellow 43618 40918 45018 45808 Black/Green ––––– 40919 45019 45809 White/Clear ––––– ––––– 45020 45810 White/Black ––––– ––––– 45021 45811 Black/Silver ––––– ––––– 45022 45812 Black/Gold ––––– ––––– 45023 45813 Black/Fluo Green ––––– ––––– 45024 ––––– Black/Fluo Red ––––– ––––– 45025 –––––

UK Adapter 40075 European Adapter 40076

Accesorios

Cintas Anchura: 6mm 9mm 12mm 19mm

(

/4")(1/4")(3/8")(1/2")

Longitud: 7m 7m 7m 7m

Negro/transparente 43610 40910 45010 45800 Azul/transparente ––––– ––––– 45011 ––––– Rojo/transparente ––––– ––––– 45012 ––––– Negro/blanco 43613 40913 45013 45803 Azul/blanco ––––– 40914 45014 45804 Rojo/blanco ––––– 40915 45015 45805 Negro/azul ––––– 40916 45016 45806 Negro/rojo ––––– 40917 45017 45807 Negro/amarillo 43618 40918 45018 45808 Negro/verde ––––– 40919 45019 45809 Blanco/Transparente ––––– ––––– 45020 45810 Blanco / Negro ––––– ––––– 45021 45811 Negro / Plata ––––– ––––– 45022 45812 Negro / Oro ––––– ––––– 45023 45813 Negro / Verde Fluor ––––– ––––– 45024 ––––– Negro / Rojo Fluor ––––– ––––– 45025 ––––– Adaptador AC 40076 De acuerdo con la directiva EMC de la Comunidad Europea, y la directiva de bajo voltaje, este producto está diseñado para cumplir con los siguientes estandards internacionales: Seguridad - EN 60950, IEC 950, UL 1959 Emisiones EMC - EN 55022 Clase B, CIS PR22 Clase B,

FCC pt15 Sub pt B clase B.

Inmunidad EMC - EN50082, IEC801-2 & IEC801-3

Page 5

PT TR

Aksesuarlar

Şerit Genişlik 6mm 9mm 12mm 19mm

(3/4")(1/4")(

/8")(

/2")

Uzunluk 7m 7m 7m 7m

Siyah/Şeffaf 43610 40910 45010 45800 Mavi/Şeffaf ––––– ––––– 45011 ––––– Kırmızı/Şeffaf ––––– ––––– 45012 ––––– Siyah/Beyaz 43613 40913 45013 45803 Mavi/Beyaz ––––– 40914 45014 45804 Kırmızı/Beyaz ––––– 40915 45015 45805 Siyah/Mavi ––––– 40916 45016 45806 Siyah/Kırmızı ––––– 40917 45017 45807 Siyah/Sarı 43618 40918 45018 45808 Siyah/Yeşil ––––– 40919 45019 45809 Beyaz/Şeffaf ––––– ––––– 45020 45810 Beyaz/Siyah ––––– ––––– 45021 45811 Siyah/Gümüş ––––– ––––– 45022 45812 Siyah/Altın ––––– ––––– 45023 45813 Siyah/Açık yeşil ––––– ––––– 45024 ––––– Siyah/Açık kırmızı ––––– ––––– 45025 ––––– AC Adaptör 40076

Acessórios

Cassetes Largura: 6mm 9mm 12mm 19mm

(

/4")(3/8")(1/2")(3/4")

Comprimento: 7m 7m 7m 7m

Preto/Transparente 43610 40910 45010 45800 Azul/Transparente ––––– ––––– 45011 ––––– Vermelho/Transparente ––––– ––––– 45012 ––––– Preto/Branco 43613 40913 45013 45803 Azul/Branco ––––– 40914 45014 45804 Vermelho/Branco ––––– 40915 45015 45805 Preto/Azul ––––– 40916 45016 45806 Preto/Vermelho ––––– 40917 45017 45807 Preto/Amarelo 43618 40918 45018 45808 Preto/Verde ––––– 40919 45019 45809 Branco/Transparente ––––– ––––– 45020 45810 Branco/Preto ––––– ––––– 45021 45811 Preto/Prata ––––– ––––– 45022 45812 Preto/Ouro ––––– ––––– 45023 45813 Preto/Verde Fluor ––––– ––––– 45024 ––––– Preto/Vermelho Fluor ––––– ––––– 45025 ––––– Adaptador 40076

Dit product heeft een CE keurmerk volgens EMC richtlijnen en de zwakstroom richtlijn en is ontworpen volgens de onderstaande internationale standaarden

Veiligheid - EN 60950, IEC 950, UL 1950 EMC emissies - EN 55022 Klasse B, CIS PR 22 Klasse B,

FCC pt 15, sub B, Klasse B

EMC immuniteiten - EN50082-1, IEC 801-2 & IEC 801-3

Toebehoren

Tape-cassettes Breedte: 6mm 9mm 12mm 19mm

(

/4")(1/4")(

/8")(

/2")

Lengte: 7m 7m 7m 7m

Zwart/Transparant 43610 40910 45010 45800 Blauw/Transparant ––––– ––––– 45011 ––––– Rood/Transparant ––––– ––––– 45012 ––––– Zwart/Wit 43613 40913 45013 45803 Blauw/Wit ––––– 40914 45014 45804 Rood/Wit ––––– 40915 45015 45805 Zwart/Blauw ––––– 40916 45016 45806 Zwart/Rood ––––– 40917 45017 45807 Zwart/Geel 43618 40918 45018 45808 Zwart/Groen ––––– 40919 45019 45809 Wit/Transparant ––––– ––––– 45020 45810 Wit/Zwart ––––– ––––– 45021 45811 Zwart/Zilver ––––– ––––– 45022 45812 Zwart/Goud ––––– ––––– 45023 45813 Zwart/Fluo groen ––––– ––––– 45024 ––––– Zwart/Fluo rood ––––– ––––– 45025 ––––– Wisselstroom adapter 40076

Page 6

Page 7

Introduction

The Dymo Labelpoint LP300 enables you to create a wide variety of high quality self-adhesive labels of up to 90 characters.

The Labelpoint uses 6mm (

/4"), 9mm (3/8"), 12mm (1/2") or

19mm (

/4") wide tape cassettes in a number of label colours. Labels are back slit for easy removal from the backing tape. Text can be printed horizontally or vertically in a variety of sizes and styles and can be left-justified, right-justified or centred on the label.

Visit www.dymo.com for information on obtaining tapes and accessories for your LP300.

Warranty Registration

Please complete the warranty registration card and return it to the relevant address, within seven days– see the warranty booklet for details.

Power Supply

BATTERIES

• Apply pressure to thumb catch then open and lift away

battery compartment cover – see fig

A➊, page 2.

• Insert six size AA alkaline or re-chargeable Nickel-

cadmium batteries, observing the polarity markings

A➋, and close cover.

• Remove batteries if the Labelpoint is to be unused for

some time.

AC ADAPTOR (optional)

• Connect the AC adaptor to socket

A➌. Inserting the

adaptor plug disconnects the supply from the batteries.

• Unplug the AC adaptor from the Labelpoint before

disconnecting the mains power to the adaptor, otherwise last label memory settings will be lost (see also ON/OFF).

Changing the cassette

• Press catch in and open hinged access doorB➊.

• Hold as shown, then lift cassette

B➋ straight up and

out.

• Ensure tape and ribbon

B➌ are taut across mouth of

cassette and tape passes between guideposts before installing as shown. If necessary, turn spool

B❹

clockwise to tighten ribbon.

• Check that cassette switch

B❺ is set for the cassette type

– see page 2. A notch in the cassette will fit over the switch when it is set correctly.

• Insert cassette with tape and ribbon positioned as

shown between print head

C➊ and pinch rollerC➋.

• Push

firmly

C➌ until cassette

clicks

into place. Ensure

tape and ribbon are positioned correctly.

• Close door

B➊ until it clicks shut.

DYMO

Cursor flashing

DYMO

Creating your first label

You will no doubt be anxious to see what your new Labelpoint LP300 can do. Before we go on to explore the many advanced features of the LP300, follow these simple steps to create your first label:

1. Fit the batteries, or connect the AC adaptor, plug in and switch on at the wall socket - ‘Power Supply’.

2. Open the cassette compartment lid and check that the tape cassette is fitted correctly – see page 2 and ‘Changing the Casette’.

3. Close the lid, then press

to switch the power on.

The display should look like this:

4. Use the keyboard to type in your full name. Each character you enter will appear on the display, for example:

• For an UPPER CASE character, press

once followed

by the character required.

• Press

CAPS

for all subsequent characters in UPPER

CASE.

• Press the space bar once for the space between each

name.

If you make a mistake, press

DEL

to delete the error,

then type in the correction.

5. When you have finished, press

. A label will be printed and will emerge from the slot in the top of the machine. Wait until the mechanism has stopped, then press down the cutter lever E to cut off the label and remove it from the machine.

You should now have a high quality printed name label — don’t waste it! If this is your personal machine, why not fix the label to the underside to identify its owner? You have just found the first of many uses for your DYMO labels.

Page 8

CLEAR TEXT

DEL

CLEAR

• Press to clear all the current text and cancel any fixed length setting, but leave the text size and other settings unchanged. Also use to exit or clear certain function key operations.

CURSOR KEY

• Press or to move the cursor along the text, one character at a time.

• Press and hold to scan through the text.

• Press

+ or to move the cursor to the beginning

or end of the line of text.

• When used in conjunction with certain function keys, use or to select options.

• To insert characters into the text, use

or to position the cursor under the character to the right of the insertion point, then type in the characters required.

• Press

or to move the cursor to the start of the

previous or next line of a multi-line label.

• Press

+ or to move the cursor to the

beginning or end of the label.

PRINTING

• Press

to print the label.

• Use cutter lever E to release the label – see page 2.

• If the display shows

↕↕↕↕↕↕↕↕↕↕, the tape cassette

installed in the machine is too narrow for the label to be printed; change the cassette to a wider tape.

PREVIEW

Allows you to preview your label before printing it.

• Press

CAPS

PREVIEW

and the entire text will scroll across

the display.

On labels with 2 or more lines, the message will be previewed as a single line message.

SPACE KEY

• Press to insert a space into the text.

SYMBOLS

• Press to select a symbol character – see SYMBOLS AND SPECIAL CHARACTERS and the symbols table on

page 2.

TEXT SIZE

SIZE

• The display shows the current selection of text print size:

Height Condensed Normal Extended small medium

large

The Display

The display shows:

• Up to two rows of 15 characters, plus the cursor, at one time.

• Function indicators – as shown above.

• The display will flash if you press an incorrect key in a

function sequence.

Shift on

CAPS on

ABCDEFGHIJKLMN

1 2 3 4

BIG font on

Vertical text

Mirror on

Copies on

Italic Outline

Barcode on

Shadow

BoxUnderline

Background

pattern

Size

Line indicator Justify

Function keys

ON/OFF Switches the power on and off.

• Switches off automatically after two minutes if no keys are pressed. The last label created will be retained and displayed when next turned on. Any stored label and settings will be retained.

Note: If the batteries are removed for more than a few seconds, all text and settings will be lost.

When power is restored, the display will show a flashing cursor (no text) and the settings will be full height

standard width text with

and all other settings off.

CAPITALS

CAPS

• Press for all subsequent characters in UPPER CASE (CAPITALS), as confirmed by the CAPS indicator in the display.

• Press again to cancel and return to lower case.

SHIFT KEY Dual action - either press and hold down or press and

release to remain in “shift” position. Press

again to

return to normal state.

• Use

before pressing an alphabet key to produce an

UPPER CASE (CAPS) character.

• For dual-purpose keys, press

first to produce the

legend above the key.

• Pressing

while

CAPS

is set will give a lower case

character.

DELETE

DEL

• Press to delete the character to the left of the cursor, or to exit certain function key operations.

Page 9

• Large height is available on 19mm labels only. Medium height is available on all except 6mm labels. Small height is available on all labels.

• Press

SIZE

to select the size menu:

Use to select the size symbol required, then press

to confirm the selection.

The "B" (BIG FONT) mode will produce highly visible labels using the entire print height. In “B” mode, all text will be printed as capitals (without accents).

• To create a label in "B" mode use

or to move the

cursor under "B" and press

(

BFONT

lights in display).

• When "B" is selected, all other options are not available.

JUSTIFY

JUST

Labels are normally printed with the text left-justified. On multi-line labels, press

JUST

to select left-justified, rightjustified or centred text, as shown in the display. See also LABEL LENGTH.

VERTICAL TEXT

VERT

• Rotates the text through 90° so that the label is printed

, as confirmed by the

VERT

indicator in the display.

• Press again to cancel and return to horizontal text. Note: Vertical text is not available on multi-line labels.

MULTI-LINE PRINTING

• Press

to start the next line of text on a multi-line

label, e.g.

This is a two

line label in the display will be

printed as:

This is a two and the display will line label indicate 2 lines:

Labels can be created as follows:

6mm

1 line small text

9mm Up to 2 lines

small text

9mm 1 line medium text

12mm

Up to 2 lines

small text

12mm 1 line medium text

The line indicator in the display will confirm the number of lines in the label.

BOXED/UNDERLINED PRINTING

BOXES

• If no Box/Underline option has been selected, pressing

BOXES

once will display the menu below:

19mm Up to

4 lines

small

text

19mm Up to 2 lines

medium text

19mm

1 line large text

1 2

Underlined -

—

= DYMO

Square Box -

Pointed Box - =

Round Corners - = Crocodile Box - =

Scroll Box - =

3-D Box - =

• Use or to move the cursor under the desired option. Either press

to select the option (confirmed

by the or — indicator displayed), or

DEL

to exit .

• When the

or — indicator is displayed, press

BOXES

cancel the Box/Underline option.

LABEL LENGTH

LTH

The length is normally calculated automatically, according to the length of the text on the label.

The label length function displays the last used fixed label length, eg:

40mm

• Press

DEL

to exit the length function without changing

the length, or:

• Use

or to increase (5000mm / 196.85

inches max.) or decrease the length in 1mm / 0.04 inch steps, or

or to increase or decrease the length in 10mm / 0.4 inch steps. The minimum fixed label length is 45mm / 1.8 inch.

• Press

to fix the length for all subsequent labels,

confirmed by the

LTH SET

indicator in the display.

• Press

LTH

to cancel the fixed length and restore the

automatic length.

• If the fixed length is too short for the text, when you

press

or +

CAPS

PREVIEW

the display will show how

much longer the label is than the fixed length, eg:

and it will not print. Either cancel the fixed length (see above), or press

LTH

twice and use to increase the

length; the label is now long enough and can be printed.

MULTIPLE COPIES

STYLE

COPIES

• Your Labelpoint can provide multiple copies within the range 1-99.

• To use this facility press

then

STYLE

COPIES

to show the last

number of copies set on the display, for example

# = 03

. Use or to increase or decrease

the number of copies required, then press

confirm (

COPIES

indicator lights in the display). To

print the desired quantity press

Page 10

• To cancel an existing multiple copies setting, press +

STYLE

COPIES

Note: A row of vertical dots will print between each label as a cutting guide.

INCREMENTAL NUMBERING

Labels can be printed in increments of 1 automatically.

• Key in your starting number as the right most digit on

the label. Press

then

the display will

automatically move up a digit to the next number. Press

then

to continue the sequence.

• It is also possible to include automatic incremental

numbering when printing multiple copies.

• Key in your starting number, eg. LABEL 1A .

• Next press

then

STYLE

COPIES

followed by until the

desired number of copies are displayed, eg.10, or use

or to move the cursor under the number digits

and key in the number required. Press

to confirm.

Now press then

. This will print ten labels -

LABEL 1A to LABEL 10A. While using fixed length setting, the Labelpoint will stop printing when the label exceeds the fixed length.

BARCODES

JUSTIFY

BARCODE

Barcodes can be printed on 19mm wide labels only and can be either full height or mixed with text on one or two lines.

To create a bar code:

• Press

JUSTIFY

BARCODE

to display the barcode type

previously selected.

• Press

DEL

to cancel and return to the current

label, or

• Use

or to step through the barcode types available: EAN-13, EAN-8, UPC-A, UPC-E, CODE-39 and CODE-128.

• Press to select the barcode type displayed. The barcode indicator will light in the display and the

symbols

and will appear at each end of the space

allocated for barcode characters.

• Enter the characters which will become the barcode, eg: 1234567.

• Press

to return to the label.

Note that the barcode indicator will appear in the display whenever the cursor is positioned under barcode characters.

• To edit a barcode, press

JUSTIFY

BARCODE

; the barcode

characters only will be displayed and the barcode indicator will light in the display.

• Press

or +

JUSTIFY

BARCODE

again to return to the label.

On a single line label, a bar code can be mixed with text which is small, medium or large size:

A two-line label always has small size text when it is mixed with a barcode.

Text entered before pressing

followed by

JUSTIFY

BARCODE

, will result in text above the barcode:

Entering the text after pressing

at the end of a barcode

will produce text below the barcode:

Text can be underlined, eg:

STYLE

• Press to display the style menu:

Use or to select

italic

, outline,

shadow

shadow or

mirrored text, then press

to confirm. The

STYLE

indicator will light in the display.

• Press

STYLE

again to cancel and return to normal text.

PAGE BREAK +

You can divide your label into 'pages' or blocks of text, each with its own text size and style settings. The number of lines which can be created in each page will depend on the label width.

• Press

+ to insert a page break.

• Press

CAPS

PREVIEW

to preview the label; each page break

is identified by the symbol •||•.

SAVE +

SIZE

SAVE

You can save up to 10 labels in the memory.

• To save your current label, press

SIZE

SAVE

to display

the memory locations. If there are no labels saved, the display will show:

with the cursor under the first location. The boxes are full if they contain a label and the cursor

will be under the last changed label, eg:

Contents of lab

ABC

123 123

ABC

1 2 3

123

1 2 3

ABC

1 2 3

ABC

1 2 3

ABC

123

1 2 3

DEF

DYMO LABELPOINT

ABC

123

1 2 3

DEF

DYMO LABELPOINT

Page 11

In this example, there are three saved labels, the cursor is under the one which was last changed and the contents of that label is displayed on the second line.

You can press +

CAPS

PREVIEW

to preview the entire

contents of the label if required.

• Use

or to move the cursor under an empty

location, then press

to save your label and return to

the label, or

DEL

to exit and return to the label.

• To delete the contents of a memory location, use or to move the cursor under the location, then

press

DEL

CLEAR

RECALL

BOXES

RECALL

• Press +

BOXES

RECALL

to display the memory locations of

saved labels - as shown in ‘SAVE’ above. To recall a saved label, use

or to move the cursor under each full location, until the label you require is displayed.

You can press +

CAPS

PREVIEW

to preview the entire

contents of the label if required.

• Press

to select the label required, or

DEL

to exit and

return to the current label.

• To delete the contents of a memory location, use or to move the cursor under the location, then

press

DEL

CLEAR

PATTERN

VERT

PATTERN

Background patterns or text cannot be printed on 6mm wide labels, or with Mirror, Vertical or BIG text.

• If a pattern is already in use (the

PATTERN

indicator is

lit in the display), pressing

VERT

PATTERN

will cancel the

pattern.

• Press

VERT

PATTERN

to display the pattern menu:

• Use or to move the cursor under the pattern

required.

• Press

to select the pattern required (the

PATTERN

indicator will light in the display), or

DEL

to exit and

return to the current label.

A label previously saved in one of the ten memory locations can be used as background text on another label. For example, a label already saved containing the name

DYMO

can be printed in the background of a label

with has LP300 as the forground text:

woodgrain

bricks

tint

check

tartan

diamonds

weave

text

Note that background text is always printed in BIG font, (regardless of the size selected for the original label) and the amount of backgound text printed is determined by the length of the foreground label.

• For background text, select ‘A’ . The display will show the saved labels locations:

Contents of lab

Use

or to move the cursor under the label location

required.

• Press

to select the label required (the

PATTERN

indicator is lit in the display) and return to the current label which will be the foreground text.

• Press

to print the label.

LAST LABEL MEMORY

• The unit will store the last label text and settings when turned off. Upon power-up, these will be restored and displayed. Removal of the batteries for more than a few seconds may cause this information to be lost.

ALIGNMENT

LTH

ALIGN

• If a fixed label length is set, each press of +

LTH

ALIGN

will

align the image to the left, the center or the right of the label, as shown in the display.

EURO CONVERSION

or +

The Labelpoint can be set to convert a chosen currency into

or out of +

Euros. When this is selected,

the label is scanned from right to left for a valid number. The first occurence of a comma (,) or a full stop (.), reading from right to left, will be read as a decimal point. For example:

• If set to convert between Euros and Belgian Francs (see ‘Euro Set-up’ below), pressing

will

convert the number on the label into Belgian Francs and add the BF value to the end of the label:

‘Sale 10.00/’ becomes ‘Sale 10.00/BF403.40’

If the original number is at the end of the label, it will be replaced by the BF value:

‘Sale 10.00’ becomes ‘Sale BF403.40’

• Pressing

will convert the number on the label into

Euros and add the Euro value to the end of the label:

‘Sale 10.00/’ becomes ‘Sale 10.00/e0.24’

If the original number is at the end of the label, it will be replaced by the Euro value:

‘Sale 10.00’ becomes ‘Sale e0.24’

Note that values are rounded to the nearest one hundreth of a unit.

DYMO

LP300

Page 12

Symbols and special characters

INTERNATIONAL CHARACTERS

To add a diacritical (accent) to create an international character, enter the character first, followed immediately by the diacritical, e.g. press

followed by / to

get é. To add a diacritical to an existing character, use

or to place the cursor under the character to the right of the character to be changed, then press the appropriate diacritical key.

SYMBOLS

• Press to show symbols and special characters, some of

which are not available direct from the keyboard. The display will show the last used symbol character, for

example:

with a line of symbols above

it. Each letter selects a line of symbol characters, numbered 1 to 6, as shown in the table on page 2.

• Press

DEL

to cancel, or

• Press a letter key ‘A’ to ‘Z’ until you find the line of

symbols required. You can then press a number key ‘1’ to ‘6’ to select the symbol required. Alternatively, use

or to step through the rows A

to Z, then use

or to move the cursor under the

symbol required.

Press

to place the symbol in the label.

Cleaning

• Clean the cutter blade regularly: Press and hold down cutter lever E to expose cutter blade D

➊, then use a

cotton bud and alcohol to clean both sides of the blade. Release cutter lever E.

• Check and clean print head face D

➋ regularly using a

cotton bud and alcohol ONLY.

Troubleshooting

No display

• check machine is on

• replace discharged batteries

• check AC adaptor.

No printing or poor text

• replace discharged batteries

• check tape cassette installed correctly

• clean the print head

• replace the tape cassette.

Poor print quality with white ink

• When using a White on Black or a White on Clear

cassette, it may be necessary to use the darkest contrast setting in order to obtain good print quality. To change the contrast setting via the keyboard, read and follow the instructions as described in the paragraph “Print Contrast”.

Tape jammed

• lift out tape cassette carefully

• remove/release jammed tape

• DO NOT cut the ink ribbon – turn spool

B➎ to tighten

• cut off excess label tape

• refit/replace the tape cassette.

Poor cutter performance

• clean the cutter blade regularly

No response to print key

• !!!!!!!!!!!!!!! in the display indicates a printer jam. Press any key to return to normal display. Open the cassette compartment and free the jam.

•

flashing in the display indicates discharged batteries. Press any key to return to normal display. Replace the batteries.

No success?

• Call the DYMO customer service hotline telephone number in your country – see the warranty booklet.

EURO SET-UP

To set the currency for conversion to Euros:

• Press

+ and then

. The display will

showthe previously selected currency and its conversion rate into Euros, eg:

BEF  BF40,3399

• Use

or to step through the currencies available:

Austria: 13,7603 öS Belgium: BF 40,3399 Germany: DM 1,95583 Spain: 166,386 Pts Finland: 5,94573 mk France: 6,55957 Fr Ireland: £ 0.78756 Italy: L1936,27 Luxembourg: LF 40,3399 e1 = _

Press

to confirm the selection.

• The next time that you press

or +

, the

conversion will be between Euros and the chosen

currency. The line showing e1 = _ is user-definable. You can enter a currency symbol and rate for your currency against the Euro, eg $US. Note that for currencies larger than the Euro, you must enter ‘0’ before the decimal point of the value.

PRINT CONTRAST — may be adjusted by pressing

SYMBOLS

followed by

to display the contrast

symbols

• Use

or to select lighter or darker print.

• Press

to confirm the setting. The contrast level will

revert to the mid-setting when the Labelpoint is turned off and on again. Note: This function enables you to adjust the print quality under extreme temperature conditions.