Essel T S1RM, S1MN User Manual

5. Calibration of Gimbal

Please do calibration when the S1 is not working as horizontal by unbalanced of roll
and tilt while using the S1.

1. Place the GoPro camera into frame housing and attach frame
housing to the gimbal.

2. Put the frame housing on a at sur face. (Refer to the image)

3. - Like the left image, hold the gimbal and the frame housing
tightly with hands.

- Power on the gimbal.

- Press the but ton and but ton together for 3 seconds.

(Please do calibration in a at or horizontal surfaces.)

4. After indicating "User Calibration" on OLED display, calibarion
operates for 5 second. (While operating calibration, DO NOT
move the gimbal and the frame housing.)

Video Tutorials

Step 1 Step 2

13

6. How to use Low Angle

When using Pan Mode: When using Follow Mode:

In Pan Mode, the camera will automatically
position left and right. The T ilt and Roll posi-

tions are xed, therefore the camera will be

pointing at the gimbal's motor.

Using your hand, manually adjust the cam­era's position by rot ating the camera away
from the gimbal motor.

14

In follow mode, the camera will automatically
adjus t its position as it is inverted.

The gimbal is automatically position and ready
for use.

7. Firmware Upgrade

Please visit our website at www.removu.com/s1_rmware. The detailed upgrade instructions can
also be found on the page.

Note: The USB port of this device is using as debugging port. so, consumers can not be used that USB

as transmitting of data.

8. Technical Specs

Gimbal

Operating Voltage (DC) 6.4V ~ 8.4V

Weight 380g (housing and battery excluded)

Vertical Tilt Angle 292°

Roll Angle 90°

Horizontal Panning Angle 292°

Operating Time (@25°C) 3h ~ 5h

Battery 7.4V / 850mAh

Battery Charging Time 2.5h (5V/ 2A)

Operating Temperature -20°C ~ 45°C

Handle

Dimensions 1.29 x 1.26 x 6. 31 inches

(32.8 x 32.0 x 160.4 mm)

Weight 70g

Remote Control

Operating Time (@25°C) 10h

Operating Distance 33fee ts (10m)

Weight 24g

Battery 3.7V / 200mAh

Battery Charging Time 2.5h (5V/ 2A)

Operating Temperature -20°C ~ 45°C

15