Essel T RMVP1 User Manual
Turn your GoPro® LCD Touch BacPac
into a Wi-Fi Live Viewer
USER MANUAL
Table of Contents
1. Understanding This User Manual 3
2. Product Components and Features 4
3. Using REMOVU P1
Charging the Battery
How to Assemble
Turning Your Device On and OFF
Wi-Fi Connection: Connecting Your GoPro for the rst time (HERO3, 3+)
Wi-Fi Connection: Connecting Your GoPro for the rst time (HERO4)
Wi-Fi Connection: Connection Failure / Reconnect
LCD Screen Indicators
Navigating Your Device
Controlling GoPro (Power On / Off)
4-1. Modes and Settings - HERO3, 3+ Series 13
4-2. Modes and Settings - HERO4 Series 18
5. Firmware Upgrade 21
6. Product Specication 22
5
5
5
6
7
8
9
10
11
12
7. Trouble Shooting Guide 23
8. Warranty Information 24
1. Understanding This User Manual
Thank you for purchasing our Wireless GoPro Live Viewing Device, REMOVU P1
(hereinafter referred to as “P1”).
This Operator’s Guide describes how to handle and operate the P1.
Before using the P1, be sure to read this manual thoroughly for proper operation.
To enhance the performance of the product, the contents of this instruction manual
may be changed without prior notice.
Safety Precautions
(1) In accordance with Personal Information Security Law & related legislation, essel-t
Co., Ltd. will not be held responsible for any problem due to illegal use of this
product.
(2) Any defects or damage resulting from accident, misuse, abnormal use, abnormal
conditions, and improper storage will not be covered by the warranty.
(3) The warranty shall cover a period of 1 year. Please refer to Pg. 24 for more details.
(4) Use only a dr y soft cloth or clean wipe when cleaning the LCD panel sur face. Do
not use other cleaning substances. It may cause discoloration or damage to the
surface of the product.
(5) Keep away from children and pets. Store your devices out of the reach of children.
(6) REMOVU is the registered trademark of essel-t Co., Ltd. essel-t Co., Ltd. reserves
the rights regarding all works related to the REMOVU brand such as product de-
sign, trademarks, and product-promotional videos. It is prohibited to reproduce,
copy, modify, or use related works without permission. Any violation may be
penalized in accordance with the relevant regulations.
(7) GoPro, HERO, the GoPro logo, and the GoPro Be a HERO logo are trademarks or
registered trademarks of GoPro, Inc.
3
2. Product Components and Features
Package Component
Please make sure your package includes all of the following items.
SET WRISTBAND USB CABLE QUICK GUIDE
Names of Each Part
6
7
1
2
3
1. Shutter / Select
2. Power / Mode / Next
3. ESC / Previous
4. Status LED
5
4
5. Charging Status LED
6. Reset
7. USB Connector
4
3. Using the REMOVU P1
Charging the Battery
*The batter y should be fully charged before using P1 the rst time.
1. Connect the device to a computer
USB port using the micro USB
cable included in the package.
2. P1 can also be charged with a
USB power adapter.
(Adaptor’s not included)
We recommend using GoPro, or
Apple iphone adaptors.
How to Assemble
®
GoPro
P1 Cover
1. Open the cover and detach it from the body.
2. Place the LCD Bacpac into the slot as below.
3. Attach the cover and lock the clamp.
LCD
Touch BacPac P1 Body
5
Turning Your Device On and OFF
Turning it on
1. Press the M (Mode / Power) button for about 1
second to turn on the power.
2. The REMOVU logo will appear. After short loading,
Wi-Fi network list will pop up.
Turning it off
1. Press the M (Mode / Power) button for about 2
seconds to turn off the device. REMOVU Power of f
logo will appear then the device will be turned off
with the red LED blinking three times.
2. If no input is made for 30 seconds in the Live View
Mode, the screen will shut off to save power.
POWER OFF
6
Wi-Fi Connections:
Connecting Your GoPro for the rst time.
HERO3, 3+ Wi-Fi SSID, and Password setup
1. Go to GoPro support page on GoPro Website to
upgrade your GoPro Camera to the latest rm-
www.gopro.com
/support
Connecting your GoPro HERO3, 3+ to REMOVU
1. Please go to the GoPro App settings menu on your HERO3, 3+ to turn on the Wi-Fi
function.
2. Turn on your REMOVU P1.
3. When the Select Camera Network Screen appears, select your GoPro’s SSID which
you have created.
ware version.
2. While upgrading, you will be asked to set up Wi-Fi
SSID, Password. Please make sure to remember
your password and SSID.
(HERO3, 3+ Users)
4. Please type the password and press enter.
5. You will see Blue LED light when the connection is successfully established.
7
Wi-Fi Connections:
Connecting Your GoPro for the rst time.
HERO4 Wi-Fi SSID, and Password setup
1. Install the GoPro App on your Smartphone.
2. Go to your GoPro 4 Setup ► Wireless ► select
GoPro App. 6 digit Pin number will appear.
3. Open the GoPro App and connect your GoPro
Camera.
4. Enter the 6 digit Pin number that the GoPro Camera is showing.
5. Create the SSID, and Password for your Camera.
6. After the connection is established, shut down the
App.
Connecting your GoPro HERO4 to REMOVU
1. Turn on your HERO4 camera and go to HERO4 Setup ► RC & App ► Select Existing to turn on the Wi-Fi function.
(HERO4 Users)
2. Turn on your REMOVU.
3. Select the SSID you generated from the Select Camera Network list.
4. Enter the password you created.
5. The Blue LED will turn on when the connection is established successfully.
8
Loading...