ESPRIT ESP0023, EL455 Owner's Manual

ESP0023 – EL455

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE

OPERATING YOUR NEW ELLIPTICAL!

OWNER’S MANUAL

EL455

EL455 Elliptical

1

Product Registration…………………………………………………………………………. .2

Important Safety Instructions…………………………………………………………………3

Important Electrical Information………………………………………………………………4

Important Operation Instructions……………………………………………………………..4

Assembly Instructions………………………………………………………………………….5

Features……………………………………………………………………………………….. 11

Operation of Your New Elliptical……………………………………………………………..12

Parts list and Explode Drawing………………………………………………………………21

Manufacturer’s Limited Warranty…………………………………………………………….25

Table of Contents

EL455 Elliptical

2

Thank you for your purchase of this quality elliptical trainer. Your new elliptical was
man

ufactured by one of the leading fitness manufacturers in the world and is backed by

one of the most comprehensive warranties available.

Please take a moment at this time to record the name of the dealer and the date of
purchase below to make any future, needed contact easy. We appreciate your support
and we will always remember that you are the reason that we are in business.

Yours in Health,

BOYLES FITNESS Equipment Pty Ltd.

Name of Dealer______________________________________
Purchase Date_______________________________________

EL455/ ESP0023 _Ver.A

CONGRATULATIONS ON YOUR

NEW ELLIPTICAL AND WELCOME

TO THE SPIRIT FAMILY!

EL455 Elliptical

3

WARNING - Read all instructions before using this appliance.

■ Do not operate the elliptical on deeply padded, plush or shag carpet. Damage to both the
carpet and elliptical may result. Set the elliptical up on a hard, even surface.

■ Keep children away from the elliptical. There are obvious pinch points and other

caution areas that can cause harm.

■ Keep hands away from all moving parts.

■ Never operate the elliptical if it has a damaged cord or plug. If the elliptical is not working

properly, call your dealer.

■ Keep the cord away from heated surfaces.

■ Do not operate where aerosol spray products are being used or where oxygen is

being administered. Sparks from the motor may ignite a highly gaseous environment.

■ Never drop or insert any object into any openings.

■ Do not use outdoors.

■ To disconnect, turn all controls to the off position, then remove the plug from the outlet.

■ Do not attempt to use your elliptical for any purpose other than for the purpose it is

inte

nded.

■ The hand pulse sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are

intended only as exercise aids in determining heart rate trends in general.

■ Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable

for use on your elliptical. Quality athletic shoes are recommended to avoid leg fatigue.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Important Safety Instructions

EL455 Elliptical

4

WARNING!

● NEVER remove any cover without first disconnecting AC power supply.

● If A.C. voltage varies by ten percent (10%) or more, the performance of your elliptical may be

affected. Such conditions are not covered under your warranty. If you suspect the
voltage is low, contact your local power company or a licensed electrician for proper testing.

● NEVER expose this elliptical to rain or moisture. This product is NOT designed for

Use outdoors, near a pool or spa, or in any other high humidity environment.

● NE

VER operate this elliptical without reading and completely understanding the results of

any operational change you request from the computer.

● Understand that changes in resistance do not occur immediately. Set your desired level on

the computer console and release the adjustment key. The computer will obey the
command gradually.

● NEVER use your elliptical during an electrical storm. Surges may occur in your household

power supply that could damage elliptical components.

● Use caution while participating in other activities while using your elliptical such as watching

television, reading, etc. These distractions may cause you to lose balance, which may result
in serious injury.

● Always hold on to a handrail or hand bar while making control changes.

D

o not use excessive pressure on console control keys. They are precision set to properly
function with little finger pressure. Pushing harder is not going to make the unit go faster or
slower. If you feel the buttons are not functioning properly with normal pressure, contact your
Spirit dealer.

Important Electrical Information

Important Operation Instructions

EL455 Elliptical

5

Assembly Instructions

ASSEMBLY PACK CHECK LIST

Step 1

#66 - M5 x 10mm
Phillips Head Screw (4pcs)

#103 - 3/8" x 3/4"
Hex Head Bolt (2pcs)

#60 - 3/8" x 2-1/4"
Hex Head Bolt (1pc)

#96 - 3/8"
Split Washer (1pc)

Step 2

#79 - 5/16" x 23mm
Flat Washer (2pcs)

#59 - 5/16" x 15mm
Hex Head Bolt (2pcs)

#83 – 17mm
Wave Washer (2pcs)

#84 - 3/8" x 23mm
Curved Washer (2pcs)

#104 - 5/16” x 1-1/4”
Hex Head Bolt (2pcs)

#80 - 5/16" x 20mm
Flat Washer (2pcs)

#71 - 5/16"
Nylon Nut (2pcs)

Step 3

EL455 Elliptical

6

ASSEMBLY PACK CHECK LIST

Step 4

Step 4

#87 - 3.5mm x 12mm
Sheet Metal Screw (8pcs)

#105 - M5 x 15mm
Phillips Head Screw (14pcs)

#108 - Phillips Head Screw Driver (1pc)

#10

7 - Short Phillips Head Screw Driver (1pc)

#109 - 12mm Wrench (1pc)

#106 - 13/14mm Wrench (1pc)

Tools

EL455 Elliptical

7

STEP 1: CONSOLE MAST ASSEMBLY

• Locate the console mast (12) and console mast cover (41) and slide the cover onto the mast as far
as it will go. Make sure the cover is facing the correct way.

• At the top opening of the main body of the elliptical is a wire harness (31). Unravel and straighten
out the wire harness and feed it into the bottom of the console mast tube and out of the top
opening.

• Install the console mast into the receiving bracket in the top of the main body: there is one bolt
already installed in the receiving bracket that will engage with the slot at the bottom of the console
mast. Secure the mast with two 3/8” x 3/4” bolts (103) and curved washers (84) through the front of
the mast and one 3/8” x 2-1/4” bolt and 3/8” washer (96) through the left side of the mast. Tighten
all four bolts securely; don’t forget the bottom bolt that is pre-installed.

• Connect the three wires (two hand pulse #36 and a computer cable #31) to the mating connectors
on the back of the console. Storing the excess wire back into the console mast, carefully install the
console onto the mounting plate and secure using four Phillips head screws (66).