Battery Powered Wi-Fi Door Station
APWIFIDSBP (Silver) APWIFIDSBLKBP (Black)
www.espuk.com
APWIFIDSBP Manual.indd 1 21/09/2017 08:51:09
System Overview
Sunshade Mounting
Bracket
Memory Card Slot
HD Camera with
IR-Cut
Weather Resistant
Speaker
Push Button
Microphone
DOXX-123456-ABCDE
Reset Button
I/O Pin Connector
1. AC/DC: Power Input I/O
2. O2/O1: Wet Contact I/O for door unlock trigger
3. B2/B1: Dry Contact I/O for wired door chime trigger
4. B2/B1: Dry Contact I/O for motorized gate control
Page 2
APWIFIDSBP Manual.indd 2 21/09/2017 08:51:09
Connections
Optional Power Connection
Volt-free switch for lock release mechanism
Requires
9V-36V, 600mA
Power Source
N.O
COM
Existing Bell Wiring
N.O
COM
Output for Lock
(Volt-free)
Output for Doorbell
(Volt-free)
Page 3
APWIFIDSBP Manual.indd 3 21/09/2017 08:51:09
Connections
+
Output for
Lock
-
*Note: For remote door unlock function with 12V/1A current output trigger;
The Door station requires a Hardwired power supply and must be a minimum of 15V 1.5A.
Optional Accessories
EVBPSBB
Lock Power Supply
Page 4
APWIFIDSBP Manual.indd 4 21/09/2017 08:51:10
EV-EXIT
Push to Release
EV-EBG
Emergency Release
EV-ML-250/500XT
Electromagnetic Lock
ENTERD
Electric Lock
Door Station Installation
It is strongly recommended APP & registration is complete prior to fixing the installation.
Step 1
Fasten the weather-seal cover
Step 2
Confirm position and mount the bracket with 3 screws
Step 3
Place the device on the mounting bracket
Step 4
Fasten the anti-theft screw.
Page 5
APWIFIDSBP Manual.indd 5 21/09/2017 08:51:10
APP Download and System Setup
Reset
Download and install the ”ESP Aperta BP” APP to your device.
Insert Batteries
1. Unscrew the battery compartment screw .
2. Insert the batteries supplied. Make sure the polarity is as indicated.
3. After the batteries are inserted, the Push Button illuminator will begin to flash,
indicating set up mode.
(3)
DOXX-123456-ABCDE
(1)
(2)
Note: If the illuminator is not lighted,
press/hold the Reset Button for 5 seconds
until the illuminator lights up and flash
Page 6
APWIFIDSBP Manual.indd 6 21/09/2017 08:51:13
APP Setup
Please ensure the following;
1. The user’s smart-phone is connected to the Wi-Fi network.
2. The Door Station is within the network’s Wi-Fi range.
3. The network’s key/password is available.
1.
2.
.
The door station’s call button will be flashing, launch the APP & select
‘add new system’ or begin set up on next page.
Page 7
APWIFIDSBP Manual.indd 7 21/09/2017 08:51:13
3.
APP Setup
DOXX-123456-ABCDE
Select ‘Scan DID Label’, the label is at the rear of the door station.
(Note; DID; Device ID)
4.
EXAMPLE123123
Enter a System Name (User defined).
Enter the default security code ‘123456’ & select ‘Save’
Page 8
APWIFIDSBP Manual.indd 8 21/09/2017 08:51:14
APP Setup
If using Android platform please follow the steps below before
moving to page 13 .
For i-Phone please follow the additional steps on page 10.
Select ‘SETUP’ on Wi-Fi Setup & Follow the on screen instructions
1.
2.
APWIFIDSBP Manual.indd 9 21/09/2017 08:51:15
3.
Page 9
Additional I-Phone Set up (Page 1/3)
If using android platform please continue to page 13.
If using i-Phone please follow additional steps.
Select ‘Setup’
1. 2.
3.
Ensure correct network is selected
Enter the network password
Page 10
APWIFIDSBP Manual.indd 10 21/09/2017 08:51:16
Additional I-Phone Set up (Page 2/3)
Select ‘Next’
4. 5.
6.
Exit APP and enter ‘Settings’ on I-phone
In the ‘Settings’ list select ‘Wi-Fi’
APWIFIDSBP Manual.indd 11 21/09/2017 08:51:16
Page 11
Additional I-Phone Set up (Page 3/3)
7.
Select ‘RVDP- XXXXXXX’
Enter Default Password;’ 12345678’
8. Once connected, Return to APP
Page 12
APWIFIDSBP Manual.indd 12 21/09/2017 08:51:16
APP Setup
After entering the network details the screen will display progress made.
If the connection fails, Re-check network settings, reset the door station
before re-attempting set up
1.
3.
2.
Page 13
APWIFIDSBP Manual.indd 13 21/09/2017 08:51:16
APP Setup
The APP will then indicate that the door station is in ‘Power Saving Mode’,
this is due to the power saving features when running on batteries;
Press the call button on the door station to test connection.
If successful move door station to installation site and retest before fixing.
Push Button
Microphone
Page 14
APWIFIDSBP Manual.indd 14 21/09/2017 08:51:16
APP View Mode
Main Page
1.
Add Device
Device Setting
Refresh
Information
2.
i áî É=s áÉï
Live View
Live Video
Video Record
Phone Mode Talk
Hand-Free Talk
3rd Party Lock/Gate Control
Mute/Unmute
Snapshot
Page 15
APWIFIDSBP Manual.indd 15 21/09/2017 08:51:18
Best Performance Notes
Network Connection
Wi-Fi devices rely on a strong and stable signal from the network. Performance and reliability
of Wi-Fi devices can become unpredictable if the signal strength is not sufficient for
whatever the reason.
If Wi-Fi signal is a possible issue, one solution is the numerous Wi-Fi signal enhancing
devices on the market to improve a network’s performance.
In addition, network connection for all devices (Wi-Fi or LAN) is limited by the bandwidth
allowance of the network, ensure that the bandwidth is suitable for the number of devices
which are being supported.
Please note; APERTA requires 2.4GHZ Wi-Fi signal band.
APP Connection
Viewing from a mobile phone relies on a strong Wi-Fi signal or ensure a strong 3G or 4G
signal is available.
For IOS it is recommended that the APP is left running in the background in order to benefit
from the best performance.
For Android, the APP must be left running in the background to receive any service from the
Door Station.
ESP are unable to guarantee that every device will be compatible with any ESP product and
software supplied.
Specific models of phone, tablet or other device, the hardware it contains, the service
provider, the types of data services offered and specific phone / device plan will all affect the
performance of PC / mobile device for remote viewing.
Battery Power
Due to the nature of battery power the unit will limit functions and features during power
saving mode.
If the user requires the constant use of the door station and full features it is recommended
that a permanent power supply is fitted.
Page 16
APWIFIDSBP Manual.indd 16 21/09/2017 08:51:19
Viewing Recorded Footage
2.
Method 1; Access the Micro SD card Is suitable if there is a permanent power
supply to the door station.
This method is not available during power saving mode under battery
conditions.
Method 2; Set Up Cloud Storage Account Is suited if the door station is powered
via batteries
Method 1 : Accessing the Micro SD card via the APP.
1.
Launch APP & select
Followed by
Page 17
APWIFIDSBP Manual.indd 17 21/09/2017 08:51:19
Viewing Recorded Footage
Method 2; Set Up Cloud Storage Account
Please ensure the following;
A Google Drive or Dropbox account will be required. Either account can be
set up online for free. Once the account has been set up, the log-in details
are required to follow procedure;
1.
Launch APP & select
2.
Select ‘Advanced’
Followed by
Page 18
APWIFIDSBP Manual.indd 18 21/09/2017 08:51:19
Viewing Recorded Footage
3.
Select Cloud Setting ‘Setup’
5.
4.
Select ‘Create Account’
Complete the sections on screen &
log-in with the account details
Page 19
APWIFIDSBP Manual.indd 19 21/09/2017 08:51:19
Viewing Recorded Footage
6.
Select Device management and
ADD the door station
7.
or DropBox.
Select Google Drive or Dropbox,
follow the on screen instruction
to complete binding
Files stored on the Cloud can then be access via Google Drive/ Dropbox
accounts or accessible via the main menu in the APP;
Launch APP & select
Followed by
Page 20
APWIFIDSBP Manual.indd 20 21/09/2017 08:51:19
Advanced Settings
Additional settings can be accessed through the ‘Advanced’ Set up menu
1.
Launch APP & select
Followed by
2.
Select ‘Advanced’
3.
Page 21
APWIFIDSBP Manual.indd 21 21/09/2017 08:51:20
Page 22
APWIFIDSBP Manual.indd 22 21/09/2017 08:51:20
Page 23
APWIFIDSBP Manual.indd 23 21/09/2017 08:51:20
Telephone: 01527 51 51 50
Elite Security Products
Unit 7, Target Park,
Shawbank Road, Lakeside,
Redditch B98 8YN
APWIFIDSBP Manual.indd 24 21/09/2017 08:51:20
Fax: 01527 51 51 43
Email: info@espuk.com
www.espuk.com
E&OE - Errors and omissions excepted.I17
Loading...