ESP HDVC36FDW, HDview HDVC36FB, HDVC36FD User Manual

HDVC36FDW

TR U E HD 1 .3 MP 7 20 P DO M E CC TV CA ME R A

U S E R M A N U A L

www. espu k .com

HDVC36FDW Manual.qxp_Layout 2 24/03/2015 09:55 Page 1

HDVC36FDW

TRUE HD 1.3MP 720P DOME CCTV CAMERA

3.6mm Fixed Lens•
True High Definition 1.3MP Image Resolution•
Built in 10m Infrared LED Illumination•
D-WDR incorporating ATR•
2D and 3D Noise Reduction•
Exposure Control•
High Light Compensation•
3-Axis Cable Management Bracket•
IP66 Weatherproof Bullet Housing•

In addition to the 720P HD resolution the HDview range of CCTV cameras all feature the multi-function on
screen display (OSD) settings. Whilst in many situations you will find an ‘out of the box installation’ will
give excellent results the OSD settings will enable you to make adjustments to the cameras final output to
provide an excellent image in the most demanding situations. Please read through this manual prior to
installation in order to better understand all the functionality of the product.

On Screen Display (OSD)

The on-screen menu is accessed and operated by the OSD control button shown.
Simply depress the control button once to access the Main Menu then move the button
up, down, left or right to navigate the options.

Options with a symbol have sub menus to access, again by depressing the OSD
control button.

There are a lot of different and useful settings to access, it is highly recommended to explore and test out
the settings in order to find setting options that will help to improve the quality and functionality of your
cameras image. Remember that there is nothing you can do to damage the camera or permanently
change settings so feel free to explore, the best setting is usually discovered through trial and error and if
it does go wrong simply select the RESET option when exiting the main menu, this will set everything
back to the factory default settings.

Included opposite is a selection of the most common and useful setting options available in the OSD
menu, these are also the most appropriate for use with your CCTV camera.

IMPORTANT - When any changes have been made you must save them before exiting the OSD menu,
highlight EXIT (option 9 in the MAIN MENU) and select SAVE & END before depressing the OSD button.

HDVC36FDW Manual.qxp_Layout 2 24/03/2015 09:55 Page 2