ESP Enterview Multi Operation And Installation Instructions Manual

For your protection, please read these instructions completely and keep it for future reference

6320000028H

Enter view Multi

WARNING

To prevent injury, the following safety precaution should be observed
during installation, use and servicing of the unit.

This symbol is intended to alert the user to the presence of
uninsulated

dangerous voltage within the product s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.

For the customers

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning equipment on and off, the user is encouraged to try to correct the
interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

- Consult the dealer or an experience radio/TV technician for help.

Note : Change or modification not expressly approved by the party

responsible for compliance could void the user’s authority to operate
the equipment

CAUTION

: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL

CAUTION

RISK OF ELECTRIC SHOCKS

DO NOT OPEN

Enterview Multi 02|03

IMPORTANT SAFEGUARDS

1. Read Instructions

All the safety and operating instructions should be read before the unit is
operated.

2. Retain Instructions

The safety and operating instructions should be retained for future
reference.

3. Follow Instructions

All operating instructions, maintenance and all warnings should be
followed.

4. Cleaning

Turn off the power of unit before cleaning. Do not use liquid or aerosol
cleaners. Use a dry cloth for the body of unit.

5. Attachments

Do not use attachments not recommended by the unit product
manufacturer, as they may be hazardous or cause damage.

6. Heat and Moisture

Do not expose this unit direct sunlight and rain for reliable operation.

7. Installation

Do not install this unit on an unstable place (hot, cold, humid or
excessive dust). Use only with a mounting accessory recommended by
the manufacturer or sold with the unit. Installing this unit should follow
instructions of manufacturer and qualified service personnel.

8. Ventilation

Slot and opening in the cabinet are provided for ventilation to ensure
reliable operation of the unit and to protect it from overheating. These
openings must not be blocked or covered. Never place your unit on a
bed, sofa, rug, or similar surface. Do not install on or near a radiator or
heat register. This unit should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided.

9. Power Sources

This unit should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power company. To
operate the unit by battery or other power source, consult the
operating instructions.

10. Grounding and Polarization

This unit may be equipped with either a polarized 2-wire AC line
plug(a

plug having one blade wider than the other) or a 3-wire
grounding type plug, a plug having a third (grounding) pin. The 2-wire
polarized plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug still fails to fit, contact your electrician to
replace your outlet. Do not defeat the safety purpose of the polarized
plug.

11. Overloading

When using this product, do not overload the power outlets or extension
cords as this could cause fire or electric shock.

12. Accessories

Do not place this unit on an unstable cart, stand, tripod, bracket, or
table. If the unit falls, it could cause injury or damage to the system.

13. Object and Liquids

Never push objects of any kind into this unit through the openings. Never
spill liquid of any kind on the unit.

14. Servicing

Do not attempt to service this unit yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.

15. Power Line

The system should not be located near power lines or electric light or
power circuits.

16. Damage Requiring Service

Unplug this unit from the wall outlet and refer to servicing to a qualified
service technician if any of the following occur.

a. If the power supply cord or plug is damaged
b. If any liquid has been spilled into or objects have fallen in the unit
c. If the unit has been exposed to rain or water
d. If the unit has been dropped or otherwise damaged
e. If the equipment exhibits a distinct change in performance

17. Replacement Part

When replacement parts are required, use replacement parts specified
by the manufacturer.