ESP APKITKPGBLK, APKITKPG User Manual

USER MANUAL

www.espuk.com

APKITKPGBLK | COLOUR VIDEO DOOR ENTRY SYSTEM

APKITKPGBLK Manual.indd 1 26/04/2017 14:02:19

2

System Cabling

All system cabling (excluding mains 240vAC supply) has been tested with Cat5E UTP PVC cable.

Part Number - A8NFORCE5EUTP

Find this product online:
elandcables.com | Cables & Accessories | LAN Cable | Cat 5E UTP PVC Cable

Contents

System Components ............................................................... 3

Installation ....................................................................... 4

System Connections Example 1 ...................................................... 5

System Connections Example 2 ...................................................... 6

Lock Connections Example 1 & 2 ..................................................... 7

Door Station Programming Guide ....................................................8

User Guide ...................................................................... 10

Monitor Overview .................................................................11

Setting Monitor as Master or Slave (Default Master) ...................................12

Accessing Monitor Functions .......................................................13

Accessing Monitor Adjustments ....................................................14

Installer’s Guide ................................................................. 15

APKITKPGBLK Manual.indd 2 26/04/2017 14:02:19

3

System Components

Door Station Monitor

EVBPSBB

Lock Power Supply

EV-EXIT

Push To Release

EV-EBG

Emergency Release

EV-ML-250/500XT

Electro-magnetic Lock

ENTERD

Electric Lock

Optional Accessories

System Power Supply

APKITKPGBLK Manual.indd 3 26/04/2017 14:02:21

4

90

。

1.2 m 1.5 m～

Site the door station a

recommended 1.5 meters from

the ground, or to suit application.

Avoid areas of high sunlight

and noise levels.

Surface mount the sunshield of the door station and

connect the system cabling. Mount the camera to the

sunshield by fixing with the supplied hex screw.

The camera needs to point in

the direction of where a visitor

will stand during operation.

Installation

Optional
door bell

connection

APKITKPGBLK Manual.indd 4 26/04/2017 14:02:23

5

System Connections Example 1

ON

K1

The last monitor on the system line has

the rear ‘K1’ switched ON

1

APKITKPGBLK Manual.indd 5 26/04/2017 14:02:24

6

System Connections Example 2

ON

K1

1

1. The last monitor on the system line
has the rear ‘K1’ switched ON.
All other monitors ‘K1’ switch to OFF

2. Please review page XXXX to set
monitor to MASTER or SLAVE.

3. If dierent types of Monitor /handset
are being used on the same system,
please refer to the supplied instructions
to adjust Master/ Slave settings .

12 to set

APKITKPGBLK Manual.indd 6 26/04/2017 14:02:26

7

N/A

N/A

N/A

N/A

N/A

N/A

N/A

APKITKPGBLK Manual.indd 7 26/04/2017 14:02:26

8

Door Station Programming Guide

Enter

Administration

Mode

>

Continue

Press

For code

location number

Enter 4 digit code

required for
door release

Press

Press

2 tones

will sound

2 tones

will sound

Input administrator

code

(Default: 123456)

2 tones

will sound

2 tones

will sound

Press

Setting a lock release code

The Administrator

code will not

release the door.

A lock release code

is required to be

programmed

Administration

Mode has been

entered

Press

Re-enter 4 digit

code required for

door release

Press

to exit and

complete setup

A long tone
will sound

Press

Entering Administration Mode

APKITKPGBLK Manual.indd 8 26/04/2017 14:02:26

9

Enter

Administration

Mode

Re-enter new

6 digit

Administration Code

Deleting a lock release code

2 tones

will sound

Press

Changing the Administrator code

Enter code

Location Number

A long tone

will sound

Press Press

Press

Press

to exit and

complete setup

Press

to exit and

complete setup

A long tone

will sound

Press

Enter

Administration

Mode

Enter new 6 digit

Administration

Code

APKITKPGBLK Manual.indd 9 26/04/2017 14:02:27

10

A B C D

1 2

User Guide

APKITKPGBLK Manual.indd 10 26/04/2017 14:02:27

11

Monitor Overview

The following monitor instructions are designed to be a quick start guide alongside the informative general user
interface (GUI) . The instructions are not exhaustive and are designed to lead the user quickly to the most often
required aspects of the unit.

APKITKPGBLK Manual.indd 11 26/04/2017 14:02:28

12

Setting Monitor as Master or Slave (Default Master)

1. In standby mode press
the menu button and the time screen
will display.

2. Press and hold the Key
for 5 seconds and the Installation setup
screen will display.

3. Press the menu button and use
the right arrow to toggle between
Master and Slave position.

4. Press the menu button to save setting, and press
the exit symbol twice. After 10 seconds the monitor returns
back to standby.

APKITKPGBLK Manual.indd 12 26/04/2017 14:02:28

13

Accessing Monitor Functions

1. In standby mode press
the menu button and the time screen
will display.

2. Press the menu button whilst on the
time screen and the main menu
screen will display.

DATE and TIME settings can be found
in the ‘User Setup’ option. Also includes ‘ring
mode’ for selective ringing times.

RECORDING & VIEWING
options can be found in the
‘SD Card Memory’ menu

PREVIEW option for all
system door stations.

INTERNAL CALL options

RING TONE
Options for incoming, internal and optional
door bell tone selections.

APKITKPGBLK Manual.indd 13 26/04/2017 14:02:28

14

Accessing Monitor Adjustments

1. In standby mode press
the preview button and the door station’s
image will display.

2. During the preview press the menu button
the adjustment controls will appear.

APKITKPGBLK Manual.indd 14 26/04/2017 14:02:28

15

Installer’s Guide

When using multiple monitors on 1 system;
Only the 1 handset set as the MASTER will display an image when the door station is activated.
All other monitors will ring, and will display the image once the ‘Talk’ button is pressed.

A That the system is powered sufficiently.
B Each monitor needs to be set to a MASTER or SLAVE position
C All system cabling is secured and properly connected.
D All system cabling is clear of breaks or short circuits.
E Bench test the system if the issue cannot be found.

A The user instructions and operation of the monitor has been understood.
B That the lock is powered sufficiently.
C All system cabling is secured and properly connected.
D All system cabling is clear of breaks or short circuits.
E On the rear of the door station, ensure the lock output is switching when activated by the monitor.

Master / Slave Setting

In the event of no video
or audio signals coming

from the monitor, or if the

call button or audio cannot

be activated on the door

station, check the following;

In the event of a lock

release issue,

check the following;

APKITKPGBLK Manual.indd 15 26/04/2017 14:02:28

www.espuk.com

Elite Security Products

Unit 7, Target Park, Shawbank Rd
Lakeside, Redditch B98 8YN

Telephone: [phone]

Fax: [phone]

email: [e-mail]

E&OE - Errors and omissions excepted. D17

APKITKPGBLK Manual.indd 16 26/04/2017 14:02:28