U S E R M A N U A L
w w w . e s p u k . c o m
A P D S S W
|
S I N G L E W A Y V I D E O D O O R S T A T I O N
APDSSW manual.qxp_Layout 1 29/01/2016 13:00 Page 1
2
System Cabling
All system cabling (excluding mains 240vAC supply) has been tested with Cat5E UTP PVC cable.
Part Number - A8NFORCE5EUTP
Find this product online:
elandcables.com | Cables & Accessories | LAN Cable | Cat 5E UTP PVC Cable
Contents
System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
System Connections Example 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
System Connections Example 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Lock Connections Example 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Lock Connections Example 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Installer’s Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
APDSSW manual.qxp_Layout 1 29/01/2016 13:00 Page 2
3
System Components
APDSSW
Door Station
Optional Accessories
APMONW/ APMONB
Monitor white/black
APMONWG/APMONBG
Monitor white/black
EVBPSBB
Lock Power Supply
EV-EXIT
Push To Release
EV-EBG
Emergency Release
EV-ML-250/500XT
Electro-magnetic Lock
ENTERD
Electric Lock
APDSSW manual.qxp_Layout 1 29/01/2016 13:00 Page 3
4
Surface mount the sunshield of the door station and connect
the system cabling. Mount the camera to the sunshield by
fixing with the supplied hex screw.
90
。
1.2 m 1.5 m～
Avoid areas of high sunlight
and noise levels.
The camera needs to point in the
direction of where a visitor will
stand during operation.
Site the door station a recommended 1.5 meters
from the ground, or to suit application.
Installation
APDSSW manual.qxp_Layout 1 29/01/2016 13:00 Page 4
5
BUS
BUS
BUS
240vAC
INPUT
POWER
SUPPLY
Power supply to be
with-in 100 meters
of monitor
No cable
or connection
polarity
Ensure the Address ID switches are both set to OFF
Address ID
01
Total cable run
should not exceed
150 meters between
door station and monitor
MASTER
Refer to instructions supplied
with monitor for MASTER/ SLAVE
configuration
System Connections Example 1
APDSSW manual.qxp_Layout 1 29/01/2016 13:00 Page 5
6
The system power supply can support up to 5 devices
1
2
3
Only one monitor is set as the MASTER:
All other monitors set as SLAVE:
Power supply to be
with-in 100 meters
of monitor
No cable
or connection
polarity
Total cable run
should not exceed
150 meters between
door station and monitor
BUS
BUS
BUS
BUS
Address ID
01
Address ID
02
BUS
BUS
POWER
SUPPLY
240vAC
INPUT
The dipswitches are accessable
on the rear of the door station
Address ID 02Address ID
03
Address ID
01
Address ID
04
MASTER
SLAVE
SLAVE
When using multiple
door stations ensure
that each unit has a
seperate Address ID
Refer to instructions supplied when using different
version of monitor for MASTER/ SLAVE configuration
System Connections Example 2
APDSSW manual.qxp_Layout 1 29/01/2016 13:01 Page 6
7
At the rear of the door station
ensure that the jumper links cover pins
1 and 2, on both J3 and J2 positions
1
2
3
J1
J2
J3
NC
4
3
+
+
+
_
_
_
Electro-magnetic lock
Electronic lock
BUS
System Wiring
LOCK1
VCC
J1
Image of
jumper link
Lock -release time
N.C for Electro-magnetic lock
N.O for Electronic lock
Lock Connections Example 1
APDSSW manual.qxp_Layout 1 29/01/2016 13:01 Page 7
8
The jumpers on the rear of the door station offer different
types of release modes for alternative applications
dependent on the jumper link settings. LOCK1 options;
N.O
N.C
N.O
Volt-f ree
Volt-f ree
12vDC300mA
MAX
Jumper 1 gives the option to set the release time;
5
sec.
3
sec.
The door station has a secondry switch. LOCK2 options;
Please refer to the operation guide for release instructions
1
2
3
J1J3J2
1
2
3
J1J3J2
1
2
3
J1J3J2
N.O
N.C
N.O
Volt-f ree
Volt-f ree
12vDC300mA
MAX
1
2
3
J1J3J2
1
2
3
J1J3J2
1
2
3
J1J3J2
Image of
jumper link
Image of
jumper link
Lock Connections Example 2
APDSSW manual.qxp_Layout 1 29/01/2016 13:01 Page 8
9
Press the ‘Talk’ button
to end call
Press the ‘Lock’ button
to release lock and press
‘Talk’ to end call
Press the ‘Gate’ button
to release lock 2 and press
‘Talk’ to end call
The visitor
presses the
call button
A chime will sound The visitor’s image will
appear on the monitor
Press the ‘Talk’ button
and begin conversation
Then choose between
the 3 options below
ABCDE
123
Call Button
User Guide
APDSSW manual.qxp_Layout 1 29/01/2016 13:01 Page 9
10
Installer’s Guide
When using multiple monitors on 1 system;
Only the 1 handset set as the MASTER will display an image when the door station is activated.
All other monitors will ring, and will display the image once the ‘Talk’ button is pressed.
A That the system is powered sufficiently.
B Each monitor needs to be set to a MASTER or SLAVE position
C All system cabling is secured and properly connected.
D All system cabling is clear of breaks or short circuits.
E Bench test the system if the issue cannot be found.
A The user instructions and operation of the monitor has been understood.
B That the lock is powered sufficiently.
C All system cabling is secured and properly connected.
D All system cabling is clear of breaks or short circuits.
E On the rear of the door station, ensure the lock output is switching when activated by the monitor.
Master / Slave Setting
In the event of no video
or audio signals coming
from the monitor, or if the
call button or audio cannot
be activated on the door
station, check the following;
In the event of a lock
release issue,
check the following;
APDSSW manual.qxp_Layout 1 29/01/2016 13:01 Page 10
11
APDSSW manual.qxp_Layout 1 29/01/2016 13:01 Page 11
w w w . e s p u k . c o m
Elite Security Products
Unit 7, Target Park, Shawbank Rd
Lakeside, Redditch B98 8YN
Telephone: 01527 51 51 50
Fax: 01527 51 51 43
email: info@espuk.com
E&OE - Errors and omissions excepted. A16
APDSSW manual.qxp_Layout 1 29/01/2016 13:01 Page 12
Loading...