Esky Rechargeable Key Finder User Manual

Esky Rechargeable Key Finder

User Manual

Introduction

This Esky rechargeable key finder can help you to find the lost keys, remotes, purses,
eyeglasses, and other easily lost items quickly. Once you press the color-coded button
on the transmitter, the beep sound and flashing light emitted from the receivers can
lead you to find the lost items. Comes with a base, the key finder is also a nice display
for your house. The transmitter can be dependently carried with you to find the lost
small gadgets.

Battery Installation

Please face the positive terminal (+ pole) up.

A: Transmitter

Follow the steps below to install a battery into the transmitter.

1. Remove the battery cover located on the back of the transmitter.

2. Install the battery according to the (+) and (-) marks inside the battery
compartment.

3. Reinstall the battery cover.

B: Receiver

The receiver comes with a built-in battery. It’s no need for battery installation.

How to Charge the Receiver

Please connect the receiver to a computer or power adapter with the provided Micro
USB cable.

Tip: It will glow a steady red during charging while turn off after being fully charged.

Operation Instruction

1. Attach the receiver on the frequently lost item with a keyring or double-sided
adhesive.

2. Well install a CR2032 battery in the transmitter.

3. Press and hold the ON/OFF button of receiver for 2s to power on the receiver,
and the receiver will sound a beep.

4. Press a button on the transmitter, and then the corresponding receiver will beep
and give out flashing light to help you find the lost item.

Note:

1) If no beep is heard, rearrange your place or replace with new batteries to try again.
If it still doesn’t work, your receiver might be out of power. Please charge the
receiver in time.

2) To extend the battery life, please slightly press the battery rim of the transmitter
and remove the battery if it won’t be used for a long time.

3) If the receiver cannot be turned on, please try again after charging it. Press it for 3
times continuously within 2s to turn off the device.

4) Under normal circumstances, the receiver needs to be charged after 6 months of
use. Please charge it in time to ensure normal use if it is used frequently.

Q & A

1. Why does the receiver give no response after I press its ON/OFF button?

The receiver may run out of power during transportation. Please try again after it is
fully charged.

2. Why does the receiver give no response after I press the button of transmitter?

It may be that the transmitter runs out of power or the receiver runs out of power. For
the former, please replace the battery in time. For the latter, please keep the receiver
be fully charged.

3. How do I know the charging status of the receiver?

If the LED indicator glows red during charging, it means the receiver hasn’t been
fully charged. After being fully charged, the LED indicator of the receiver will auto
turn off.

4. How to extend the lifespan of the transmitter and the receiver?

Please remove the batteries of transmitter and turn off the receiver if they won’t be
used for a long time. Press it for 3 times continuously within 2s to turn off the
receiver.

Specifications

Working range: 30-45 meters (open space)
Beep sound: 90-100dB
Frequency: 433.92MHz
Charging time (for the receiver): 1.5-2 hours
Battery Life: Max. 6 months