ESI MIDIMATE II User Manual

USB 2.0 MIDI Interface

Cable with 2 I/O ports

User's Guide

Introduction

MIDIMATE II is a convenient USB 2.0 MIDI interface

cable with up to 32 input or 32 output channels for PC
and Macintosh systems. With MIDIMATE II you can
obtain perfect MIDI timing and performance at an
extremly affordable price.

Features

- USB MIDI interface with 2 MIDI connectors, each can

- work as independent input or output

-

high-speed connection to USB 2.0 or 1.1 equipped PC

- or Macintosh system

- bus powered, requires no external power supply

-

no driver needed for Windows XP, Windows Vista,

- Windows 7 and Mac OS X

Description

MIDIMATE II is an adapter cable that connects the

USB port of your computer to any MIDI Input or MIDI
Output labelled connector on an external MIDI device.
Two MIDI connectors are provided by MIDIMATE II.

Installation

To install MIDIMATE II, you need to find the USB port
on your computer. Make sure your computer is
switched on and simply connect the cable to the USB
port. No driver installation is required.

Under Windows XP, you can check if MIDIMATE II has
been installed by going to Control Panel > Sounds &
Multimedia > Audio > MIDI Playback. You will see 2
new USB MIDI entries in the MIDI port selection. Note
that this dialog no longer exists under Windows Vista /

7. Please start your MIDI application (like a sequencer
or notation software) to check the MIDI ports there.

Under Mac OS X, you can launch the Audio MIDI
Setup application. MIDIMATE II will be listed under
MIDI Devices with 2 I/O ports.

Usage

Using MIDIMATE II with your applications could not be
easier. If you connect the MIDI cable to a MIDI Output
of an external device, signals will appear via MIDI
input in your software. If you connect it to a MIDI Input,
you can send signals to the external device via the
MIDI playback function of your software.