ESI LIFT-WB-SLV Assembly Instructions Manual

LIFT-WB

FREE-STANDING BASE

LIFT-WB Rev A 3/17

Model LIFT-WB-SLV

ASSEMBLY AND ADJUSTMENT

LIFT-WB PARTS AND TOOLS

PARTS AND TOOLS PROVIDED

CAUTION:

PLEASE REVIEW these instructions before beginning the assembly and adjustment procedures. Check that

all the parts and tools listed below were provided with your order. Contact your supplier if any materials are

your satisfaction.

Main Assembly (1)

Keyboard Platform (1)

M6x8mm Screw (2) Keyboard Hole Plug (2)

4mm Allen Key (1) 6mm Allen Key (1)

Hand-tighten screws only. Do not use power tools.

WARNING: When you first squeeze the paddle lever to operate this product, there is
no load on the unit (weight of monitor, keyboard, etc.). Firmly hold the top platform
to control the rate of movement. Take appropriate precautions to avoid pinching or
otherwise injuring yourself.

2