E SENSE Technology BMD705 User Manual

CSR Harm ony�Help

Adding a Bluetooth device

To add a Bluetooth device:

From the Notification area

From MyBluetooth Devices

Dependent on the device type, you can als o connect to your com puter from the remote device. See Connecting from the rem ote device.

FromtheNotificationarea:

1. Ensure the device is turned on, has Blu etooth enabl ed and is di scoverable.

2. In the Notification area, right-click the Bluetooth icon, select Add Bluetooth Device and choose the device type you want to a dd:

3. The Add Bluetooth Device window opens.

All discoverable Bluetooth devices of the chose n type, w hich are in range , wi ll be displayed. Click on the device you want to
connect to and click Next:

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna
or transmitter.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or
relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a
circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

4. You m ay be prompted to enter a pai ring code on the device. The co de may be entered on your phone handset us ing the
num ber pad or using the device's keyboard. When promp ted on your device, e nter the p airing code:

If a pairing code is displayed o n both your PC and the remote device, accept or confirm on both.

5. Click Finish to complete adding a Bluetooth device.

FromMyBluetoothDevices:

1. Ensure the device is turned on, has Blu etooth enabl ed and is di scoverable.

2. In My Bluetooth Devices, click Add Bluetooth Device and choose the device type you want to add:

3. The Add Bluetooth Device window opens.

All discoverable Bluetooth devices of the chose n type, w hich are in range , wi ll be displayed. Click on the device you want to
connect to and click Next:

Back to top