Esco Pro Series, 10962 Operating Instructions Manual

Operating Instructions

Model 10962

DIGITAL TIRE INFLATOR

COMPLIES WITH

EN12645: 2014*

COMPLIES WITH

EN12645: 2014*

2

Digital Tire Inflator

Thank you for selecting the Digital Tire Inflator, please read this manual carefully before
using.

This manual is an important part of this product and be should stored safely for future
reference. It should be made available for new operators and maintenance personnel.

We reserve the right to change product features at any time.

IMPORTANT

This tire inflator must only be connected to air line systems which have clean dry air. Any
moisture in the air line system may cause damage to the operation of this tire inflator and
void warranty.

Operation

■ To read pressure:

P lace hold-on chuck squarely and firmly onto tire valve, before each pressure reading
fully depress lever and release.
Check pressure gauge, the digital display will activate once the tire pressure is

sensed.
If no pressure is sensed the display will not turn on, please press trigger to add air into
tire, before reading pressure.

■ To inflate:

P lace hold-on chuck squarely and firmly onto tire valve.

Fully depress lever for an appropriate period of time and release lever.

Check pressure gauge and repeat procedure until correct pressure level

is achieved.

■ To deflate:

Place hold-on chuck squarely and firmly onto tire valve.

Depress lever half way (until air can be heard escaping) for an appropriate period of

time and release lever.

Check pressure gauge and repeat procedure until correct pressure level is achieved.

Safety

■ Never exceed the maximum pressure of the tire.

■ Check that hose and chuck are in good condition with no damage or

cracks.

■ Ensure safe working environment when using compressed air.

■ Place hold-on chuck squarely and firmly onto tire valve.

■ Return to authorized service agent for repair and maintenance.