Esco 10497, 10498, 10499 Instruction Manual
Equipment Supply Company
Instruction Manual
3 Ton Jack Stands - High Performance Style
MODEL 10497
MODEL 10498
MODEL 10499
01.01.2019 V.1
Read this manual and follow All Safety Rules and Operating Instructions before ANY use of this product.
Copyright © 2019 Equipment Supply Co., All rights reserved
3 Ton Jack Stand “High Performance Style” - MODEL #10497, 10498, 10499
CAUTION:
READ AND FOLLOW ALL WARNINGS, CAUTIONS AND INSTRUCTIONS ASSOCIATED WITH
THE PROPER USE OF THIS PRODUCT, FAILURE TO COMPLY COULD RESULT IN DEATH,
BODILY INJURY AND/OR DAMAGE TO EQUIPMENT.
Specications
Model Capacity (Per Stand) Min. Height Max. Height Base Size
10497
10498
10499
3 Ton
6,000 lbs.
3 Ton
6,000 lbs.
3 Ton
6,000 lbs.
13.2”
335mm
13.2”
335mm
11”
280mm
21.5”
546mm
21.5”
546mm
17”
432mm
12” x12”
305mm
12” x12”
305mm
9.5” x 9.5”
241mm
Important Safety Information
Read these safety warnings before operation.
WARNING!
Failure to heed these warnings may result in loss of load, damage to jack stands, and / or jack
stand failure resulting in personal Injury or property damage.
WARNING!
Do not overload jack stands beyond rated capacity. Overloading can cause damage to or failure
of the jack stands and bodily harm. Position load on center of saddle only. Always use stands on
hard level surface capable of sustaining the load. Use of stands on anything other than a hard level
surface can result in stand instability and possible loss of load. It is recommended when lifting front
end or back end of vehicle to use a pair of matching jack stands.
NOTE: The manufacturer is not responsible in any way for any damage that may
result to persons or objects due to improper use of these Jack Stands.
2
1.800.352.9852 • info@esco.net •www.esco.net
Loading...