Escali E6CB, E15CB, E3CB, E30CB, E30CBB User Manual

CB Series

Battery Powered Counting Scales

TM

E

E

s

s

c

c

a

a

l

l

i

i

Digital Scales

ELECTRONIC SCALE OPERATING MANUAL

SPECIFICATION

CB Series

MODEL

Capacity

Resolution(e)

Tare range 50% of Full Capacity

Weighing range

Operating Temp., Humidity

Power Requirement DC 1.5V(D size) X 6EA / DC 12V, 300mA(Adapter)

Power Consumption MAX.: 0.31W

Platform Size(mm) 337(W) × 256(L)

Product Size(mm)

Product Weight

Display Two side display: Weight (5 Digits), Quantity (8 Digits), Unit Weight (6 Digits)

Operating hours with battery Manganese battery -  500hrs , Alkaline battery -  1,000hrs (Without Back light)

Direct PLU 20 Direct PLU keys

Quantity Shortage Range

Unit Weight Shortage Range

g

lb

g

lb

g

lb

g 15 30 75 150

lb 0.03 0.66 0.2 0.3

g 0.33 0.66 1.33 3.33

lb 0.001 0.002 0.003 0.007

E3CB E6CB E15CB E30CB

3,000 6,000 15,000 30,000

6 12 30 60

0.5 1 2/5 5

0.001 0.002 0.005/0.01 0.01

10~3,000 20~6,000 40~15,000

0.02~6 0.04~12 0.08~30 0.2~60

-10 ~ +40, 85%

Non-pole type 348(W) × 382.4(L) × 153(H)

Non-pole type 4 kg

100~30,000

CONTENTS

1. Introduction ---------------------------------------------------------------------

2. Installation and Details for Caution Use -------------------------------------------------

3. Name of Each Part ----------------------------------------------------------------

4. Instructions classified by Power Source -------------------------------------------------

5. Keypad and Display Information -------------------------------------------------------

6. Function ----------------------------------------------------------------------

- Procedures to set to Zero

- Procedures to set up and release the Tare

- Procedures to save a preset key (PLU key) with Unit weight

- Procedures to add up

- Procedures to set up time to automatically turn off the power

7. Error Indication and its Information ----------------------------------------------------

1. Introduction

Thank you for purchasing our Escali commercially applicable CB SERIES electronic scale. Before using this product, please read the manual carefully
in order to fully utilize the features.

z The protection provided by this equipment may be impaired if this equipment is used in a manner not specified in this manual.
z Possible modifications could be made to this product in the future for quality and functional improvement purposes.

z Installation Category  : This instrument is supplied from the fixed installation.
z Pollution degree 2 : General environment without restriction for dust and moisture.

z

: Grounding, : Caution

2. Installation and Details for Caution Use

* Unless you follow the cautions properly, there may be life damage or material damage.

 Correct Installation Procedures

z This instrument is intended for indoor use only.
z Install in areas with no influence of heat, such as direct ray of light and heater.
z Install away from areas with either strong magnetic force or electrical noise.
z Install on a flat and vibration-free platform.
z Install in areas with no dusts and moistures.
z Install in areas with no wind currents and radical thermal alterations.

z This instrument is not suitable for use at altitude above 2000m.

 Details for Caution Use – Make sure to check the power source before use.

z Use a soft cloth with appliance of alcohol when polishing the scale.
z Keep out water or any liquid-type substance from the scale.
z Check to see if the scale is placed horizontally before use. If the scale is not in a horizontal position, use the horizontal positioning screw in order to adjust its position.

(Have the foam inside of the level gauge be in the center.)
z When the scale is turned on, the display will be set to initial scaling condition after indicating RB-XX.
In order to maintain its electrical safeties, warm up the machine for approximately 10 minutes before use.

z Make sure the weight display is set to " 0 g " before use. If the display is not set to " 0 g ", use after setting the display to " 0 g " by pushing the "Zero/Tare" key.
z Use only authorized adapter.
z Use same kinds of batteries when using batteries.
z Remove the battery from the scale if not using the scale for a long time. It may cause damage to the scale from the leak of zinc-air battery.
z Weighing by over maximum capacity may cause damage to the scale.
z This scale needs periodical inspection every two years.
z Never reorganize, repair or disassemble this scale. Inquire of a manufacturer of a distributor about after service.