Escali C3315, C136, C6630 User Manual

PROFESSIONAL DIGITAL COUNTING SCALE

C - Series

OPERATING MANUAL

INTRODUCTION

Congratulations on your purchase of our Professional Digital Counting Scale.
In order to ensure the scale continues to deliver peak performance, please

read these operation instructions carefully and thoroughly prior to initial usage.

IMPORTANT

1. Read all instructions before operating the scale.

2. Follow the basic safety precautions for all office equipment when using this
scale.

3. The manufacturer does not warrant this unit to be waterproof. Do not
expose this product to rain or moisture.

4. Do not use the scale in direct sunlight. Keep it away from heating
appliances such as an oven, stove, etc.

5. This scale does not contain any user-serviceable parts. Do not
disassemble.

6. Use the scale for its intended purpose only.

Note: The display value may be affected by electromagnetic influences, e.g.
when a radio is operated in the immediate vicinity of the device. The product
can be used for its intended purpose again when the interference is
discontinued, but may need to be switched on again to re-start.

1

PARTS DESCRIPTION

Weight
Display

Bubble
Leveler

Unit
Weight
Display

Total Pcs
Display

AC Socket

Level Adjusting

feet

Stainless Steel
Scale Platform

Numeric and
Function Keys

Unit Weight

Setting

Upper &
Lower Limit
Setting

Power On/off
Switch

Rechargeable
Battery Door

SYMBOLS

1) Insufficient sample size

2) Insufficient unit weight

3) Battery Low

Cancel Upper
& Lower Limit

Unit Weight
Recall

4) Accumulating

M+

2

5) Cancel Accumulating MC

OPERATION

LEVEL THE SCALE

When the scale is put to use at a new place, adjust the level of the scale by turning the 4
level adjusting feet until the bubble is located in the middle position of the bubble.leveler.

ACTIVATING THE SCALE

1. Turn on the “power on/off switch”

2. All LCD displays will light up and display 9,8,7,6,5,4,3,2,1,0,A,B,C,D,E,F in turn until

the LCD displays as shown :

SET UP UNIT WEIGHT

Example : 4 pcs of pencil :
(A). Unit weight of item is unknown

1. Turn on the scale.

2. Place the samples on the platform and the exact weight of samples will be displayed.

3. Input the quantity of the samples, Then press “SET UNIT” key,

Remark: the unit weight will be stored in the scale and can be recalled by
pressing the “UNIT WGT” key.

3