Escalade Sports STEEL CLAD BASKETBALL User Manual
Owner's Manual
STEEL CLAD BASKETBALL
BACKBOARD
PATENT No. 4,424,968
Thank you for buying our product. We try hard to ensure that our products are of high quality
and free of problems, such as manufacturing defects or missing parts. However, if you have
any problems with your new product, please call us at:
TOLL FREE 1-800-426-1421
(THIS IS A CONSUMER ONLY NUMBER)
Model No.
B9136
CAUTION : READ
INSTRUCTIONS
CAREFULLY
CUSTOMER SERVICE DEPT., P.O. Box 889, Evansville, IN 47706
Or write us at:
Fax Number: (812) 467-1399
Please provide model number and/or serial number of the product or part when you call
or write . Model numbers , serial numbers and/or part numbers can be found on product
, packaging , or instruction sheet .
IMPORTANT : AT LEAST TWO PEOPLE ARE NEEDED TO MOUNT THIS BACKBOARD !
To mount your backboard , you will need a 1/2" wrench , or an adjustable wrench and a large standard
screwdriver (not furnished with board) .
DO NOT DRILL HOLES IN THE BOARD
Mounting holes in the goal must match the holes in this board . If holes do
not match , "Goal" must be drilled to fit or replaced .
MOUNTING BACKBOARD
Mount backboard using four 5/16-18 x 1 3/4 truss head screws(#1) , four
5/16 split lockwashers (#2) and four 5/16-18 hex nuts (#3) as shown .
GOAL HEIGHT-Official height is 10 feet from top of goal
to ground .
Read and understand
these instructions
before beginning
assembly.
REPLACEMENT PARTS LIST
KEY
NO.
3 2B-6025-00 5/16 HEX NUT 4
4 2l-6389-00 INSTRUCTION SHEET 1
PART
NUMBER
901-17
1
2 2B-6023-00 5/16 SPLIT LOCKWASHER 4
5/16-18 X 1 3/4 SLD TRS SCREW 4
DESCRIPTION
QTY.
IMPORTANT CUSTOMER INFORMATION
This basketball backboard may not withstand the weight
of a person hanging from the rim, or net, or "slam
dunking" the ball unless used with shear pin (drop down)
goal.
Use the mounting holes that are in the board . Do not
drill new holes . Adding new holes will affect the
durability of this board .
2L-6389-00
Loading...