Escalade sports P3253LEG, P3253RAIL User Manual

OWNER’S MANUAL

OUTDOOR POOL TABLE

MODEL NO. P3253LEG, 527.25725

MODEL NO. P3253RAIL, 527.25726

1. READ THIS MANUAL CAREFULLY BEFORE STARTING ASSEMBLY.
Read each step completely before beginning each step.

2. SOME SMALLER PARTS MAY BE SHIPPED INSIDE LARGER PARTS. CHECK INSIDE ALL PARTS
AND CARTONS BEFORE ASSEMBLING OR ORDERING PARTS.

3. USE THE HARDWARE IDENTIFIER TO IDENTIFY AND SORT ALL FASTENERS. CHECK ALL CARTONS
FOR KITS.

THIS TABLE IS CONTAINED IN TWO SEPARATE CONTAINERS:

Container #1......Contains top section of table, hardware kit and owner’s manual.

Container #2......Contains four leg assemblies.

PLEASE DO NOT RETURN PRODUCT TO THE STORE!

Contact Escalade® Sports customer service department at:

Phone: [phone] Toll Free !
Fax: [phone] Toll Free !

E-mail: [e-mail]

Mailing Address: Escalade® Sports, PO Box 889, Evansville, IN 47706

Please visit our World Wide Web site at:

www.escaladesports.com

On-Line Trouble Shooting Frequently Asked Questions

Technical Assistance On-Line Parts Requests

Additional Escalade® Sports Product Information

2L-6788-00

CAUTION

To ensure safety, do not attempt to assemble product without following instruc­tions carefully. Proper and complete assembly, use, and supervision is essential for
proper operation and to reduce the risk of accident or injury. A high prob­ability of serious injury exists if this system is not installed, maintained, and
operate properly.

IMPORTANT-COVER YOUR TABLE WHEN NOT IN USE!

This pool table has been manufactured using special composites designed and engineered to with­stand outdoor exposure including rain, sun, and wind. A high quality exterior vinyl cover has been
included FREE with this table to keep moisture off the table playing surface.

When not in use, always place the vinyl form fitted cover and the foam inserts over the table top.
Covering the table will dramatically extend the life of this product and keep it protected and looking
new for years. The vinyl cover and foam inserts must always be used in rainy or stormy conditions to
keep large volumes of water away from the playfield. Failure to use the outdoor cover and foam
inserts provided will results in the warranty becoming invalid.

This table has NOT been designed for extreme weather conditions such as snow, ice, sleet, blizzards,
or other acts of God. The table should be stored for the winter in such extreme conditions.

Tools Needed: (Not Included)

• 1/2” Open End Wrench • Rachet with 1/2” socket • Carpenters Level

NOTE: Rails are made with cushion rubber at a height that requires standard 2 1/4” diameter balls.
Your dealer has a complete line Billiard Accessories.

NOTE: This table adds weight to any floor. Be sure floor can withstand this kind of weight. If floor sags,
table will be impossible to level.