Escalade Sports 2L-6742-02 User Manual
OWNER’S MANUAL
OUTDOOR 2000 BILLIARD TABLE
MODEL NO. P3250A
IMPORTANT! - COVER YOUR TABLE WHEN NOT IN USE.
This billiard table has been manufactured using special composites designed and engineered to withstand outdoor exposure
including rain, sun, and wind. A FREE high quality exterior vinyl cover has been included with this table to keep rain and moisture
off the table top playing surface.
When not in use, you should always put the vinyl form fitted cover and the foam inserts over the table top. This will dramatically
extend the life of this product and keep it looking new for years to come.
The vinyl cover and foam inserts must always be used in rainy or stormy conditions to keep large volumes of water away from
the playfield. Failure to use the outdoor cover and foam inserts provided will result in your warranty becoming invalid.
This table has NOT been designed for extreme weather conditions such as snow, ice and sleet. The table should be
stored for winter in such extreme conditions.
PLEASE DO NOPLEASE DO NO
PLEASE DO NO
PLEASE DO NOPLEASE DO NO
Contact Escalade® Sports Customer Service Department at:
Mailing Address: Escalade® Sports, PO Box 889, Evansville, IN 47706
On-Line Trouble Shooting Technical Assistance
On-Line Parts Requests Frequently Asked Questions
Additional Escalade® Sports Product Information
T RETURN PRT RETURN PR
T RETURN PR
T RETURN PRT RETURN PR
Phone: 1-866-556-2757 Toll Free!
Fax: 1-866-873-3532 Toll Free!
E-mail: billiardtables@escaladesports.com
Please visit our World Wide Web site at:
www.escaladesports.com
ODUCT ODUCT
ODUCT
ODUCT ODUCT
TO TO
TO
TO TO
THE STTHE ST
THE ST
THE STTHE ST
ORE!ORE!
ORE!
ORE!ORE!
2L-6742-02 Page 1
CAUTION
To ensure safety, do not attempt to assemble product without following instructions carefully. Proper and
complete assembly, use, and supervision is essential for proper operation and to reduce the risk of accident or
injury. A high probability of serious injury exists if this system is not installed, maintained, and operated properly.
NOTE: Rails are made with cushion rubber at a height that requires standard 2 1/4” diameter balls. Billiard Accessories are included
in this unit..
NOTE: This table adds weight to any floor. Be sure floor can withstand this kind of weight. If floor sags, table will be impossible to level.
HARDWARE IDENTIFIER:
(To attach legs only)
# 3 # 7
# 2
# 4
5/16-18 x 2-1/4” Hex Bolt (8 Pieces)
Tools Needed: (Not Included)
• 1/2” Open End Wrench
• Rachet with 1/2” socket
• Carpenters Level
5/16” Flat washer
(16 Pieces)
11
10
5
14
3
9
8
7
4
6
5/16-Split lock washer
(8 Pieces)
15
12
17
5/16-18” Hex nut
(8 Pieces)
16
13
17
17
1
21
15
22
REPLACEMENT PARTS LIST
ITEM# PART# DESCRIPTION QTY
1 2A-7000-00 FINSHED PEDESTAL 2
2 801-66 5/16-18 X 2-1/4” HEX BOLT 8
3 2B-6024-00 5/16 FLATWASHER 34
4 2B-6025-00 5/16-18 HEX NUT 26
5 2M-6245-00 CORNER POST 4
6 3M-6615-00 LEG LEVELER 4
7 2B-6023-00 5/16 SPLIT LOCKWASHER 26
8 2B-6058-00 FENDER WASHER 18
9 2W-6759-00 SLATE SUPPORT 18
10 1B-6610-00 5/16-18 X 3-1/4 HEX BOLT 18
11 3M-6603-00 SIGHT PLUG 18
ITEM# PART# DESCRIPTIONS
12 2A-6985-00 LEFT RAIL 2
13 2A-6986-00 RIGHT RAIL 2
14 2A-6987-00 END RAIL 2
15 3M-6612-00 CORNER CAP 4
16 3M-6610-00 SIDE CAP 2
17 3M-6194-00 DROP POCKET (SET OF 6) 1
18 3F-6036-00 TABLE COVER 1
19 2L-6742-02 THIS MANUAL 1
20 5A-6973-00 BILLIARD ACCESSORIES KIT (SET) 1
21 2W-6781-00 LONG SIDE APRON 2
22 2W-6422-00 END APRON 2
Page 2
QTY
Loading...