Escalade Sports 2L-6542-00 User Manual
Mobile Basketball System Manual
Model #'s B3009
Welcome to SERIOUS PLAY
The innovative MOBILE BASKETBALL SYSTEM you have purchased brings true playability to the game
of basketball. The unit you are about to assemble is the most unique "movable" piece of basketball
equipment ever developed by Harvard. Please follow closely the enclosed assembly instructions and you
will soon be enjoying your MOBILE SYSTEM. Soon you will discover how a
™
from
LARGER playing surface,
GREATER rigidity, and SUPERIOR rebound combine to deliver true performance to your game.
We try hard to ensure that out products are of high quality and free of problems, such as
manufacturing defects or missing parts. However, if you have any problems with your product, please
understand that the retailer from which you purchased your product will not carry the specific performance
parts you may require. You will receive excellent service and rapid response by calling us directly at:
TOLL FREE 1-800-426-1421
FAX 812-467-1399
(These are consumer only numbers)
Please be sure to have this Owner's Manual with you when you call.
When purchasing replacement parts a major credit card can be used for your convenience.
Or write us at:
Customer Service Dept.
P.O. Box 889
Evansville, IN 47706
Please provide model numbers and/or part numbers (not just the item numbers) of the product and/or
part when you call or write. These numbers can be found on the product, packaging, and/or in the
Owner's Manual.
WARNING
Do not hang on rim. Do not tilt unit into
play position without proper ballast.
Tools Needed:
" (1) 5/8" wrench
" (2) 9/16" wrenches
Before beginning:
! Read and understand these instructions completely before using your Mobile
Basketball Unit.
! Watch for sharp edges on steel parts!
! At least two adults are needed to assemble and move this unit.
" (2) 1/2" wrench
" (2) 7/16" wrench
" (1) hammer
" (1) blade screwdriver
LIMITED WARRANTY
MANUFACTURER W ARRANTS TO THE ORIGINAL RETAIL PURCHASER, THIS PRODUCT TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP WHICH IMPAIR THE USE
OF THE PRODUCT FOR A PERIOD OF TWELVE YEARS FROM THE DATE OF PURCHASE. SHOULD THIS PRODUCT BECOME DEFECTIVE DUE TO MATERIAL OR WORKMANSHIP
WITHIN THE WARRANTY PERIOD, CONTACT OUR CUSTOMER SERVICE DEPARTMENT FOR OPTIONS ON PURSUING A WARRANTY CLAIM.
THIS WARRANTY IS NOT TRANSFERRABLE AND DOES NOT COVER SCRA TCHING OR SCUFFING OF THE PRODUCT(S) WHICH MAY RESULT FROM NORMAL USAGE, OF DAMAGE
CAUSED BY SHIPPING, IMPROPER HANDLING, INSTALLATION OR USE OF THIS PRODUCT(S). NOR DOES THIS WARRANTY COVER RUSTING OR FADING DUE TO WEATHER
CONDITIONS, CLIMATE CONDITIONS, OR EXPOSURE TO CORROSIVES SUCH AS SALTS, PESTICIDES, ETC... THIS WARRANTY IS ALSO VOID IF PRODUCT(S) IS IN ANY WAY
ABUSED, DAMAGED, MODIFIED FROM ITS ORIGINAL STATE, OR IF USED FOR OTHER THAN RESIDENTIAL USE.
REPAIR OR REPLACEMENT AS PROVIDED UNDER WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. THE MANUFACTURER SHALL NOT BE LIABLE FOR INDIRECT,
SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH RESPECT TO
ANY ECONOMICAL LOSS, LOSS OF PROPERTY, LOSS OF ENJOYMENT OF USE, COST OF REMOV AL, INSTALLA TION OR OTHER DAMAGES FOR BREACH OF ANY EXPRESSED OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION OF THIS WARRANTY.
SOME STA TES DO NOT ALLOW THE EXCLUSION OR LIMIT A TION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ALLOW LIMIT A TIONS OF HOW LONG AN IMPLIED W ARRANTY
LASTS, SO THE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
Patented or licensed under one or more of the following patents: U.S. Patent Numbers - 4,365,802 - 4,465,277 - 4,424,968
1
2L-6542-00
2
Assembly Instructions
IMPORTANT! DO NOT OVERTIGHTEN
THE FASTENERS IN THE FOLLOWING
TWO STEPS. DOING SO WILL CRUSH
THE TUBES!
1. Assemble lower base tube (#37) to rear
brace bracket (#38) using four carriage
bolts (#16) and four nylock nuts (#25).
Tighten fasteners securely.
2. Assemble rear upright tube (#39) to rear
brace bracket (#38) using two each hex
bolts (#20), flat washers (#19), and nylock
nuts (#25). Tighten fasteners securely.
SERIOUS PLAY
™
3. Attach two rear foot brackets (#40) to each
other using hex bolt (#3) and nylock nut
(#4). These brackets are light gauge steel
channels with sharp edges. Avoid touching
sheared edges.
4. Attach rear foot assembly
(#40) to rear upright tube
(#39) using two each
carriage bolts (#16) and
nylock nuts (#25). Tighten
fasteners securely.
Note: Only one lower brace
assembly is shown for clarity.
3
5. Thread a hex nut (#11) onto
threaded stud on front foot
(#41) until distance between
top of foot and top of nut
measures 2 inches. Then place
a bellows (#50) over threaded
stud and insert it through the
hole in the lower base tube
assembly. Thread another hex
nut (#11) onto the stud and
snug top nut against assembly
holding bottom nut. Repeat
for opposite side. These nuts
will be readjusted to level later.
SERIOUS PLAY
™
6. Assemble upper base tubes
(#43), stabilizer brackets (#32)
and pivot tube (#42). Don't
tighten bolts yet. Pivot has four
holes in one side and two in
the other. The side with four
holes has two holes which are
closer together. These are the
holes used for this assembly.
Use hex bolts (#10), four
washers (#8), and two nylock
nuts (#12).
4
7. Place cap (#29) on assembly.
Insert two bubble vials (#67)
into level housing (#68) as
shown in detail 'A '. Peel one
piece of backing off of
adhesive strip (#69) and
adhere tightly to back of
bubble level assembly, making
sure that bubble vials seat
firmly in level housing. Peel
other piece of backing off of
the adhesive strip and adhere
the level assembly to the cap
(#29). Place upper base tube
assembly on lower base tube
assembly. Make sure upper
base tube assembly seats
completely onto lower base
tube assembly. Slide on evenly
to prevent binding. At this
time, tighten bolts securely.
SERIOUS PLAY
Detail 'A'
™
IMPORTANT! DO NOT
OVERTIGHTEN THE
FASTENERS! DOING SO
WILL CRUSH THE TUBES!
8 .Find a suitable place for
unit to be played on away
from power lines. Place
unit in final position
ready for play and use hex
nuts (#11) to level.
Level the unit front to
back and side to side
by getting the bubbles
centered between the lines
in both bubble vials.
To level, loosen top hex
nut (#11), then either
turn bottom hex nut
counter-clockwise to
raise, or clockwise to
lower. Then
retighten top hex
nut while holding
bottom hex nut.
5
9. Attach upper pad (#44) to pivot
tube/upper tube assembly by
sliding it over the tubes so that
SERIOUS PLAY reads in front of the
unit.
Slightly bending the pad will be
necessary to accommodate the
round tubes.
SERIOUS PLAY
™
10. Slide axle (#46) into rear
support tube (#39). Place
wheels (#45) on both ends.
Note: Recesses go to the
outside of the unit. Tap axle
caps (#6) onto axle. Push
square cap (#29) into top of
assembly.
NOTE: Lower base tubes and
other parts have been
omitted from illustration for
clarity.
6
Loading...