Escalade Sports 2L-6519-01 User Manual

Thank you for buying our product. We try hard to insure that our products are of high quality and free of
problems, such as manufacturing defects or missing parts. However, if you have any problems with
your new product, please call us at:

OWNER'SOWNER'S

OWNER'S

OWNER'SOWNER'S

MANUALMANUAL

MANUAL

MANUALMANUAL

MODEL NO.MODEL NO.

MODEL NO.

MODEL NO.MODEL NO.

B95162

SEE HARDWARESEE HARDWARE

SEE HARDWARE

SEE HARDWARESEE HARDWARE

IDENTIFIER ON BACKIDENTIFIER ON BACK

IDENTIFIER ON BACK

IDENTIFIER ON BACKIDENTIFIER ON BACK

OF THIS SHEET.OF THIS SHEET.

OF THIS SHEET.

OF THIS SHEET.OF THIS SHEET.

Detail ADetail A

Detail A

Detail ADetail A

TOLL FREE 1-800-426-1421

Please have this Owner’s Manual with you when you call.

Please provide model number and/or part number (not just ITEM number) of the product and/or part
when you call or write. These numbers can be found on the product, packaging, and/or in this
Owner’s Manual.

Manufacturer warrants to the original retail purchaser, this product to be free from defects in material and
workmanship for a period of ten (10) years for the backboard and ninety (90) days for all accompanying parts
from the date of purchase.
Should this product become defective due to material or workmanship within the warranty period, contact our
Customer Service Department for repair or replacement at our option.
This warranty is not transferable and does not cover normal wear and tear, or damage caused by improper
handling, installation or use of this product. This warranty is also void if product is in any way abused, damaged,
or modified from its original state, or if used for other than residential use.
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

P.O. Box 889, Evansville, IN 47706 Fax Number: [phone].

Figure 1Figure 1

Figure 1

Figure 1Figure 1

(THIS IS A CONSUMER ONLY NUMBER)

Or write us at: CUSTOMER SERVICE DEPT.

LIMITED WARRANTY

Figure 2Figure 2

Figure 2

Figure 2Figure 2

To assemble, you will need:To assemble, you will need:

To assemble, you will need:

To assemble, you will need:To assemble, you will need:

o Two ½" Wrenches o Standard Screwdriver
o Pliers

1. Locate the yellow bolt (#13) and yellow jam nut (#14) in
hardware bags. Assemble nut and bolt to backplate (#3)
as shown in Detail A. Tighten securely by threading nut
and bolt against one another.

2. Attach top half of backplate #3 and plastic cover #2 to
backboard and pole with two bolts #9, four washers #6,

Please be sure to fill out your Product Registration Form below and return it to us (postage is paid).

Date of Purchase: Month Day Year 19

Price Paid: $ .00

Was product on: o Sale o Regular price o Clearance
Did you purchase accessories? o yes o no

Thank you for buying our product. Please help us to continue to bring you
better products by answering the following questions.

1. How would you rate the following? Excellent Good Fair Poor

n Condition of product when received oooo
n Was manual easy to understand? oooo
n Ease of part identification oooo
n Ease of assembly oooo
n Was product designed well? oooo
n Was product manufactured well? oooo
n Were all parts included? oooo

n Please rate this product overall? oooo

2. How often do you expect to use this product per month?

o 1-5 times o 5-10 times o 10+

two split lockwashers #8, and two hex nuts #7. Do not tighten nuts tight yet.
(See Figure 1)

3. Slide goal ass'y #1 over hex bolt (#13). (See Figure 2) Slide leaf spring #4
over hex bolt (#13) and brace on goal ass'y. Secure with two bolts #9, four
washers #6, two split lockwashers #8, and two hex nuts #7. Square up goal
and tighten all four nuts tight. (See Figure 2)

4. Attach top of backboard to pole with two screws #11, two lockwashers #8,
and two hex nuts #7. Tighten nuts tight.

2L-6519-01

3. Age (optional)

o - 18 o 35-44
o 18-24 o 45-54
o 25-34 o 55 +

5. Occupation (optional)

YOU SPOUSE YOU SPOUSE

omProfessional/Executive omStudent
omClerical/Service Worker omRetired
omTradesman/Machine Op./Laborer omHomemaker
omTechnical

6. Was this purchase:

o A first time purchase o Replacement of our brand
o Replacement of another brand

7. Was the product: Purchased by: Purchased for:

8. Why did you buy this product (rank any three in order of importance,

123 123 1 23 123

oooPrice oooWarranty oooConstruction oooBrand
oooQuality oooFeatures oooEndorsement oooOther

Father oo
Mother oo
Pre-teen oo
Teen oo
Relative oo
Other (specify)

with 1 most important, 3 least important)

4. Household Income: (optional)

o - $15,000 o $35,000-$44,999
o $15,00-$24,999 o $45,000-$59,999
o $25,000-$34,999o $60,000 +

5.5.

5. Cover the leaf spring with flap on

5.5.

plastic cover as shown above. The
hole in this section hooks over the
threaded stud. Put flange nut #10
on threaded stud.

NOTE: There are two different ways
this goal can be used:

1) as a spring goal

2) as a conventional goal

For spring loaded goal:

Screw flange nut onto threaded
stud only until the end of the stud
extends through flange nut. (See
detail above)

For conventional goal:

Screw flange nut completely onto
threaded stud. (See detail in above)

6. Attach net to hooks on bottom edge
of rim as shown right.

REPLACEMENT PARTS LISTREPLACEMENT PARTS LIST

REPLACEMENT PARTS LIST

REPLACEMENT PARTS LISTREPLACEMENT PARTS LIST

ITEM # PART # DESCRIPTION QTY.

1 900-133V Goal Assembly 1
2 904-101 Plastic Cover 1
3 900-122V Backplate Assembly 1
4 910-103B Leaf Spring 1
5 920-16 Net 1
6 901-15 5/16 Std. Washer 12
7 701-18 5/16-18 Hex Nut 8
8 901-16 5/16 Split Lockwasher 8
9 1B-6196-00 5/16-18 x 3 Hex Bolt 4
10 901-157 5/16-18 Flange Nut 1
11 1B-6046-00 5/16-18 x 2¾ Screw 2
12 B95162 Backboard 1

13 1B-6208-00 5/16" x 1-1/2" Yellow Hex Blt 1
14 2B-6089-00 5/16" Jam Nut, Yellow 1
15 2L-6519-00 This Owner's Manual 1

B9903 Backboard 1

THIS BACKBOARD AND GOAL ARETHIS BACKBOARD AND GOAL ARE

THIS BACKBOARD AND GOAL ARE

THIS BACKBOARD AND GOAL ARETHIS BACKBOARD AND GOAL ARE
NOT DESIGNED TO WITHSTANDNOT DESIGNED TO WITHSTAND

NOT DESIGNED TO WITHSTAND

NOT DESIGNED TO WITHSTANDNOT DESIGNED TO WITHSTAND
THE WEIGHT OF A PERSON HANG-THE WEIGHT OF A PERSON HANG-

THE WEIGHT OF A PERSON HANG-

THE WEIGHT OF A PERSON HANG-THE WEIGHT OF A PERSON HANG­ING FROM THE RIM OR NET! DOING FROM THE RIM OR NET! DO

ING FROM THE RIM OR NET! DO

ING FROM THE RIM OR NET! DOING FROM THE RIM OR NET! DO
NOT HANG FROM THE RIM OR NET!NOT HANG FROM THE RIM OR NET!

NOT HANG FROM THE RIM OR NET!

NOT HANG FROM THE RIM OR NET!NOT HANG FROM THE RIM OR NET!

2L-6519-01

NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES