Escalade Sports 2L-6193-02 User Manual
OWNER'S
MANUAL FOR
BACKBOARD & GOAL COMBO
MODEL NOS.
B9914-1 B9940-1
B9941-1
Thank you for buying our product. We try hard to insure that our products are of high quality
and free of problems, such as manufacturing defects or missing parts. However, if you have
any problems with your new product, please call us at:
TOLL FREE 1-800-426-1421
(THIS IS A CONSUMER ONLY NUMBER)
READ THESE
INSTRUCTIONS
CAREFULLY
Manufacturer warrants to the original retail purchaser, this product to be free from defects in material and workmanship which impair the use of the product for a period of eight (8) years from
the date of purchase for the backboard and ninety (90) days for all accompanying parts.
Should this product become defective due to material or workmanship within the warranty period, contact our Customer Service Department for repair or replacement at our option.
This warranty is not transferable and does not cover scratching or scuffing of the product(s) which may result from normal usage, or damage caused by shipping, improper handling, installation
or use of this product. Nor does this warranty cover rusting or fading due to weather conditions, climate conditions, or exposure to corrosives such as salts, pesticides, etc. This warranty is also
void if product is in any way abused, damaged, or modified from its original state, or if used for other than residential use.
Repair or replacement as provided under this warranty is the exclusive remedy of the consumer. The manufacturer shall not be liable for indirect, special, or consequential damages arising
out of or in connection with the use or performance of the product or other damages with respect to any economical loss, loss of property, loss of enjoyment of use, costs of removal, installation
or other consequential damages for breach of any expressed or implied warranty on this product. Except to the extent prohibited by applicable law, any implied warranty of merchantability
or fitness for a particular purpose on this product is limited in duration of this warranty.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations of how long an implied warranty lasts, so the limitations or exclusions may not
apply to you. This warranty gives specific rights, and you may also have other rights which vary from state to state.
Please have this Owner’s Manual with you when you call.
Or write us at: CUSTOMER SERVICE DEPT., P.O. Box 889
Evansville, IN 47706 Fax Number: (812) 467-1399.
Please provide model number and/or part number (not just the key number) of the product
and/or part when you call or write. These numbers can be found on the product, packaging,
and/or in this Owner’s Manual (Parts list can generally be found near the back of manual.).
LIMITED WARRANTY
We strongly recommend mounting this backboard and
goal to an extension arm pole for maximum goal support!
See instructions shipped with your pole for mounting
details.
EXTENSION
ARM
POLE
BEFORE MOUNTING THE BACKBOARD:
If using a universal mounting bracket, note
that you will need to use the Temporary
Safety Strap shown at the right. It should
be placed between the
mounting hole
in the backboard and the
top left-hand goal
bottom left hand backboard mounting
hole
in the backboard (See right).
Follow steps 1-2 below to secure backboard (and safety strap) to your mounting
structure.
However, if mounting to a Universal Mounting Bracket
(like the one shown) or similar mounting system where
the goal is only supported by the backboard, you must
use the Temporary Safety Strap shipped with this
backboard. Without extra support behind the goal such
as provided by an extension arm pole (see above, left),
hanging from the rim and slam dunking the ball may
cause the backboard to break.
TOOLS NEEDED: Two ½" Wrenches, Pliers, Slotted Screwdriver
P/N 2L-6193-02
PRODUCT PARTS LIST FOR MODEL Nos.
B9914-1, B9940-1, B9941-1
ITEM # PART NOS. DESCRIPTION QTY.
1 900-133V Goal Assembly 1
2 904-101 Plastic Cover 1
3 900-122B Backplate Assembly 1
4 910-103B Leaf Spring 1
5 3F-6001-00 Net 1
6 2B-6024-00 5/16 Std. Washer 1 2
7 2B-6025-00 5/16-18 Hex Nut 8
8 2B-6023-00 5/16 SplLockwasher 8
9 1B-6047-00 5/16-18 x 3 Hex Bolt 4
10 901-157 5/16-18 Flange Nut 1
11 1B-6045-00 5/16-18 x 2½ Carr. Bolt 2
12 See Model No. Backboard 1
13 1B-6046-01 5/16-18 x 2¾ Sl. Scr. 2
14 2S-6049-00 Safety Strap 1
15 1B-6208-00 5/16" x 1-1/2" Yellow Hex Blt 1
16 2B-6089-00 5/16" Jam Nut, Yellow 1
17 2L-6193-02 This Owner's Manual 1
We also recommend ordering a Safety Bracket
free of charge to permanently secure the goal
to your mounting structure. This safety bracket is not required when using an extension arm
pole.
Please mail to: Customer Service
P.O. Box 889
Evansville, Indiana 47706-9989
1. Attach TOP HALF of backboard to your mounting structure with
two bolts #11, two washers #6, two split lockwashers #8, and
two hex nuts #7. Do not tighten nuts yet. (See FIGURE 2, right)
2. Locate the yellow bolt (#15) and yellow jam nut (#16) in
hardware bags. Assemble nut and bolt to backplate (#3) as
shown in Detail A. Tighten securely by threading nut and bolt
against one another.
3. Attach TOP HALF of backplate #3 and plastic cover #2 to your
backboard with two bolts #9, four washers #6, two split
lockwashers #8, and two hex nuts #7.
NOTE: If mounting backboard to a universal mounting bracket
(or other four hole mount), secure the temporary safety strap to
goal at this time. (See FIGURE 1 and FIGURE 2) Do not tighten
nuts yet. Also secure the temporary safety strap and the
BOTTOM HALF of the backboard to mounting structure with
two bolts #13, two washers #6, two split lockwashers #8, and
two hex nuts #7. (See bolts #13 in Hardware Identifier)(See
FIGURE 1)
FIGURE 2
Detail A
4. Slide goal ass'y #1 over hex bolt (#15). (See FIGURE 3)
Slide leaf spring #4 over the hex bolt (#15) and the brace on goal ass'y
#1. Secure with two bolts #9, four washers #6, two split lockwashers
#8, and two hex nuts #7.
Square up goal and tighten all four nuts tight. (See FIGURE 3)
5. Go back and tighten all other loose nuts and bolts at this time.
6. Cover the leaf spring with the loose section of the plastic cover as
shown in FIGURE 4. The hole in this section hooks over the threaded
stud. Put flange nut #10 on threaded stud.
NOTE: There are two different ways this goal can be used:
1) as a spring goal
2) as a conventional goal
For spring loaded goal:
Screw flange nut onto hex bolt (#15) only until the end of the stud
extends through the flange nut. (See FIGURE 4)
For conventional goal:
Screw flange nut completely onto hex bolt (#15). (See detail in FIGURE
4)
7. Attach long loops of net to hooks on bottom of rim. (See FIGURE 5)
FIGURE 3
FIGURE 4
FIGURE 5
This backboard and goal are not designed to withstand
the weight of a person hanging from the rim or net. DO
NOT HANG FROM THE RIM OR NET!
COPYRIGHT © 1994 Indian Industries, Inc.
Loading...