ESAB WeldCloud Mobile Instruction Manual
WeldCloud™ Mobile
Instruction manual
0464 547 001 GB 20171106
Valid for: Serial no: 648-xxx-xxxx
TABLE OF CONTENTS
1
SAFETY ....................................................................................................... 4
1.1 Meaning of symbols ............................................................................... 4
1.2 Safety precautions ................................................................................. 4
2
INTRODUCTION.......................................................................................... 6
2.1 Equipment ............................................................................................... 6
3
TECHNICAL DATA ...................................................................................... 7
4
INSTALLATION............................................................................................ 8
5
OPERATION ................................................................................................ 10
5.1 Connections and control devices ......................................................... 10
5.2 Startup sequence ................................................................................... 11
6
MAINTENANCE........................................................................................... 12
6.1 Inspection and cleaning......................................................................... 12
7
ORDERING SPARE PARTS........................................................................ 13
DIAGRAM ............................................................................................................. 14
ORDERING NUMBERS ........................................................................................ 15
ACCESSORIES .................................................................................................... 16
Rights reserved to alter specifications without notice.
0464 547 001 © ESAB AB 2017
1 SAFETY
1 SAFETY
1.1 Meaning of symbols
As used throughout this manual: Means Attention! Be Alert!
DANGER!
Means immediate hazards which, if not avoided, will result in immediate,
serious personal injury or loss of life.
WARNING!
Means potential hazards which could result in personal injury or loss of
life.
CAUTION!
Means hazards which could result in minor personal injury.
WARNING!
Before use, read and understand the instruction manual
and follow all labels, employer´s safety practices and Safety
Data Sheets (SDSs).
1.2 Safety precautions
Users of ESAB equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety
precautions must meet the requirements that apply to this type of equipment. The following
recommendations should be observed in addition to the standard regulations that apply to
the workplace.
All work must be carried out by trained personnel well-acquainted with the operation of the
equipment. Incorrect operation of the equipment may lead to hazardous situations which can
result in injury to the operator and damage to the equipment.
1. Anyone who uses the equipment must be familiar with:
○ its operation
○ location of emergency stops
○ its function
○ relevant safety precautions
○ welding and cutting or other applicable operation of the equipment
2. The operator must ensure that:
○ no unauthorised person is stationed within the working area of the equipment
when it is started up
○ no-one is unprotected when the arc is struck or work is started with the
equipment
3. The workplace must:
○ be suitable for the purpose
○ be free from drafts
0464 547 001
- 4 -
© ESAB AB 2017
1 SAFETY
4. Personal safety equipment:
○ Always wear recommended personal safety equipment, such as safety glasses,
flame-proof clothing, safety gloves
○ Do not wear loose-fitting items, such as scarves, bracelets, rings, etc., which
could become trapped or cause burns
5. General precautions:
○ Make sure the return cable is connected securely
○ Work on high voltage equipment may only be carried out by a qualified
electrician
○ Appropriate fire extinguishing equipment must be clearly marked and close at
hand
○ Lubrication and maintenance must not be carried out on the equipment during
operation
CAUTION!
Class A equipment is not intended for use in residential
locations where the electrical power is provided by the
public low-voltage supply system. There may be potential
difficulties in ensuring electromagnetic compatibility of class
A equipment in those locations, due to conducted as well
as radiated disturbances.
NOTE!
Dispose of electronic equipment at the recycling
facility!
In observance of European Directive 2012/19/EC on Waste
Electrical and Electronic Equipment and its implementation
in accordance with national law, electrical and/or electronic
equipment that has reached the end of its life must be
disposed of at a recycling facility.
As the person responsible for the equipment, it is your
responsibility to obtain information on approved collection
stations.
For further information contact the nearest ESAB dealer.
ESAB has an assortment of welding accessories and personal protection equipment
for purchase. For ordering information contact your local ESAB dealer or visit us on
our website.
0464 547 001
- 5 -
© ESAB AB 2017
2 INTRODUCTION
2 INTRODUCTION
WeldCloud™ Mobile enables two-way communication between the welding power source
and a remote WeldCloud™ server, either through Wi-Fi, Wired LAN or 3G. The
WeldCloud™ Mobile incorporates a GPS functionality to track the location of the welding
power source. There is also a Bluetooth interface to enable connection to a Bluetooth
device, for example a Bluetooth enabled bar code scanner.
WeldCloud™ Mobile can be used with power sources that are fitted with a W82control unit
or a PEK control panel.
2.1 Equipment
WeldCloud™ Mobile is supplied with:
• An instruction manual
• A control cable for connection to a W82control unit or to a PEK control panel
• Two Ethernet cables for connection to LAN and W82control unit or PEK control panel
Instruction manuals in other languages can be downloaded from the Internet:
www.esab.com
0464 547 001
- 6 -
© ESAB AB 2017
Loading...